[smartmontools-support] "sample output of above [defects] table"
Brandon Orwell
xt at codeslum.org
Wed Apr 27 19:09:37 CEST 2022
smartmon told me to send you this table.
regards
xt
Pending Defects log (GP Log 0x0c)
Index LBA Hours
0 22221857552 7614
1 22221857553 7614
2 22221857554 7614
3 22221857555 7614
4 22221857556 7614
5 22221857557 7614
6 22221857558 7614
7 22221857559 7614
Please send sample output of above table to:
smartmontools-support at listi.jpberlin.de
I was receiving errors from the cron, two at a time once per day, since
April 23rd:
The following warning/error was logged by the smartd daemon:
Device: /dev/sdz [SAT], 8 Offline uncorrectable sectors
Device info:
ST16000NM001G-2KK103, S/N:ZL237NJE, WWN:5-000c50-0c46c9827, FW:SN03, 16.0 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Sat Apr 23 04:10:24 2022
CDT
Another message will be sent in 24 hours if the problem persists.
Full output:
root at harvest01/pts0:~/scrubs# smartctl -x /dev/sdz
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-19-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST16000NM001G-2KK103
Serial Number: ZL237NJE
LU WWN Device Id: 5 000c50 0c46c9827
Firmware Version: SN03
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Apr 27 12:09:17 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error aborted command
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 567) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: (1450) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x70bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 079 064 044 - 82548141
3 Spin_Up_Time PO---- 095 095 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 4
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 384
7 Seek_Error_Rate POSR-- 080 060 045 - 102261853
9 Power_On_Hours -O--CK 091 091 000 - 8609
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 4
18 Unknown_Attribute PO-R-- 100 100 050 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 074 049 040 - 26 (Min/Max
20/28)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2
193 Load_Cycle_Count -O--CK 083 083 000 - 34803
194 Temperature_Celsius -O---K 026 040 000 - 26 (0 20 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 8
198 Offline_Uncorrectable ----C- 100 100 000 - 8
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate PO---K 100 100 001 - 0
240 Head_Flying_Hours ------ 100 253 000 - 5923 (229 188
0)
241 Total_LBAs_Written ------ 100 253 000 - 31431100634
242 Total_LBAs_Read ------ 100 253 000 - 233292725910
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 8 Device Statistics Notification
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 768 Current Device Internal Status Data log
0x2f GPL - 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 160 Device vendor specific log
0xa2 GPL VS 16320 Device vendor specific log
0xa4 GPL,SL VS 160 Device vendor specific log
0xa6 GPL VS 192 Device vendor specific log
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xad GPL VS 16 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc1 GPL,SL VS 8 Device vendor specific log
0xc3 GPL,SL VS 56 Device vendor specific log
0xc7 GPL,SL VS 8 Device vendor specific log
0xc9 GPL,SL VS 8 Device vendor specific log
0xca GPL,SL VS 16 Device vendor specific log
0xcd GPL,SL VS 1 Device vendor specific log
0xce GPL VS 1 Device vendor specific log
0xcf GPL VS 512 Device vendor specific log
0xd1 GPL VS 656 Device vendor specific log
0xd2 GPL VS 10000 Device vendor specific log
0xd4 GPL VS 2048 Device vendor specific log
0xda GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
0xe2 GPL,SL - 160 Reserved
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 119
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 20/28 Celsius
Lifetime Min/Max Temperature: 20/51 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
Vendor specific:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 4 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 10/40 Celsius
Min/Max Temperature Limit: 5/60 Celsius
Temperature History Size (Index): 128 (6)
Index Estimated Time Temperature Celsius
7 2022-04-22 06:41 25 ******
8 2022-04-22 07:40 26 *******
... ..( 3 skipped). .. *******
12 2022-04-22 11:36 26 *******
13 2022-04-22 12:35 25 ******
14 2022-04-22 13:34 26 *******
15 2022-04-22 14:33 26 *******
16 2022-04-22 15:32 23 ****
... ..( 15 skipped). .. ****
32 2022-04-23 07:16 23 ****
33 2022-04-23 08:15 25 ******
34 2022-04-23 09:14 26 *******
35 2022-04-23 10:13 26 *******
36 2022-04-23 11:12 25 ******
37 2022-04-23 12:11 26 *******
... ..( 3 skipped). .. *******
41 2022-04-23 16:07 26 *******
42 2022-04-23 17:06 25 ******
43 2022-04-23 18:05 26 *******
... ..( 23 skipped). .. *******
67 2022-04-24 17:41 26 *******
68 2022-04-24 18:40 25 ******
69 2022-04-24 19:39 25 ******
70 2022-04-24 20:38 25 ******
71 2022-04-24 21:37 26 *******
72 2022-04-24 22:36 25 ******
73 2022-04-24 23:35 25 ******
74 2022-04-25 00:34 26 *******
75 2022-04-25 01:33 26 *******
76 2022-04-25 02:32 25 ******
... ..( 2 skipped). .. ******
79 2022-04-25 05:29 25 ******
80 2022-04-25 06:28 26 *******
81 2022-04-25 07:27 25 ******
82 2022-04-25 08:26 26 *******
83 2022-04-25 09:25 25 ******
84 2022-04-25 10:24 26 *******
85 2022-04-25 11:23 25 ******
86 2022-04-25 12:22 26 *******
87 2022-04-25 13:21 25 ******
88 2022-04-25 14:20 26 *******
... ..( 2 skipped). .. *******
91 2022-04-25 17:17 26 *******
92 2022-04-25 18:16 25 ******
93 2022-04-25 19:15 25 ******
94 2022-04-25 20:14 26 *******
95 2022-04-25 21:13 26 *******
96 2022-04-25 22:12 25 ******
97 2022-04-25 23:11 26 *******
... ..( 10 skipped). .. *******
108 2022-04-26 10:00 26 *******
109 2022-04-26 10:59 25 ******
110 2022-04-26 11:58 25 ******
111 2022-04-26 12:57 26 *******
112 2022-04-26 13:56 25 ******
113 2022-04-26 14:55 26 *******
114 2022-04-26 15:54 25 ******
115 2022-04-26 16:53 25 ******
116 2022-04-26 17:52 26 *******
117 2022-04-26 18:51 25 ******
118 2022-04-26 19:50 25 ******
119 2022-04-26 20:49 26 *******
... ..( 14 skipped). .. *******
6 2022-04-27 11:34 26 *******
SCT Error Recovery Control:
Read: 100 (10.0 seconds)
Write: 100 (10.0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 25 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20220427/e2abb650/attachment-0001.htm>
More information about the Smartmontools-support
mailing list