[smartmontools-support] "sample output of above [defects] table"

Christian Franke Christian.Franke at t-online.de
Thu Apr 28 18:41:07 CEST 2022


Brandon Orwell wrote:
> smartmon told me to send you this table.

Thanks!

>
> regards
> xt
>
> Pending Defects log (GP Log 0x0c)
> Index                LBA    Hours
>     0        22221857552     7614
>     1        22221857553     7614
>     2        22221857554     7614
>     3        22221857555     7614
>     4        22221857556     7614
>     5        22221857557     7614
>     6        22221857558     7614
>     7        22221857559     7614
>
> Please send sample output of above table to:
> smartmontools-support at listi.jpberlin.de
>

(BTW: smartctl 7.0 or later do no longer print this request)


>
> I was receiving errors from the cron, two at a time once per day, 
> since April 23rd:
>
> The following warning/error was logged by the smartd daemon:
>
> Device: /dev/sdz [SAT], 8 Offline uncorrectable sectors
>
> Device info:
> ST16000NM001G-2KK103, S/N:ZL237NJE, WWN:5-000c50-0c46c9827, FW:SN03, 
> 16.0 TB
>

This is as expected because attributes 197/198 report the number of 
pending uncorrectable sectors.


>
> Full output:
>
> root at harvest01/pts0:~/scrubs# smartctl -x /dev/sdz
> smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-19-amd64] (local build)
> Copyright (C) 2002-17, Bruce Allen, Christian Franke, 
> www.smartmontools.org <http://www.smartmontools.org>
>
> ...
> 197 Current_Pending_Sector  -O--C-   100   100   000    -    8
> 198 Offline_Uncorrectable   ----C-   100   100   000    -    8
> ...

See above.


> SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
> No Errors Logged
>

Error log entries should appear here if the pending sectors are actually 
accessed.


> SMART Extended Self-test Log Version: 1 (1 sectors)
> Num  Test_Description    Status                  Remaining 
>  LifeTime(hours)  LBA_of_first_error
> # 1  Short offline       Completed without error       00%   119         -

Please retry the short test (smartctl -t short). It usually stops 
immediately and reports the first pending LBA. If not, try a long test.


> ...
> Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']

smartctl 7.0 or later include '-l defects' in the '-x' option.

Thanks,
Christian



More information about the Smartmontools-support mailing list