[smartmontools-support] support SiliconMotion 3282 usb bridge

[Franz Volkovic]

>Please answer this question from my last mail:
>
>> Which -d options were tested and did not work?
>> See: https://www.smartmontools.org/wiki/USB[https://www.smartmontools.org/wiki/USB]
>> (Note that the device may use NVMe instead of ATA internally)


via quirks downgraded to usb-storage
smartctl -x /dev/sda -d ...

ata - Read Device Identity failed: Invalid argument
scsi - see last mail
nvme - Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Invalid argument
sat - Read Device Identity failed: scsi error unsupported scsi opcode
usbcypress - Read Device Identity failed: Unknown error
usbjmicron - failed: scsi error unsupported scsi opcode
usbprolific - Read Device Identity failed: scsi error unsupported scsi opcode
usbsunplus - Read Device Identity failed: scsi error unsupported scsi opcode
sntjmicron - hangs... and then: Read NVMe Identify Controller failed: Invalid argument
sntrealtek - Read NVMe Identify Controller failed: scsi error unsupported scsi opcode
intelliprop,X - ATA_READ_LOG_EXT (addr=0xc0:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented
jmb39x - Unknown JMicron type 'jmb39x'
jms56x - Unknown device type 'jmb56x'
marvell - Read Device Identity failed: Unknown error
areca - Unknown device type 'areca'
3ware - Unknown device type '3ware'
hpt - Unknown device type 'hpt'
megaraid - Unknown device type 'megaraid'
aacraid - Unknown device type 'aacraid'
cciss - Unknown device type 'cciss'
auto - Unknown USB bridge [0x8564:0x1000 (0x1100)]
test - Unknown USB bridge [0x8564:0x1000 (0x1100)]


...does this help?

FV