[smartmontools-support] Avoid Repeated messages form smartd

Claudio Kuenzler napsty at gmail.com
Tue Sep 10 10:19:40 CEST 2019


Hi Carsten

Sorry, this won't be a direct answer to your question concerning the smartd
daemon, but you can of course also use other methods to regularly check for
the SMART attribute values and be notified when the values change. Take a
look at https://github.com/Napsty/check_smart where you can set thresholds.

cheers
ck

On Tue, Sep 10, 2019 at 9:19 AM Carsten Schmitz <
carsten.schmitz at limesurvey.org> wrote:

> Hi,
>
> everday I am getting this message.
>
> --------------- snip --------------------
>
> This message was generated by the smartd daemon running on:
>
>    host name:  xxx
>    DNS domain: xxx.x
>
> The following warning/error was logged by the smartd daemon:
>
> Device: /dev/sda [SAT], 630 Offline uncorrectable sectors
>
> Device info:
> HGST HUS726020ALA610, S/N:K5H3M1HA, WWN:5-000cca-25ecfbc1f, FW:A5GNT920, 2.00 TB
>
> For details see host's SYSLOG.
>
> You can also use the smartctl utility for further investigation.
> The original message about this issue was sent at Sun Sep  1 16:44:19 2019 BST
> Another message will be sent in 24 hours if the problem persists.
> --------------- snap ------------------
>
> When I look at the smartclt output I can see the value also as RAW value, but the SMART count did not degrade
>
> ----------------------------
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
>   2 Throughput_Performance  0x0005   133   133   054    Pre-fail  Offline      -       120
>   3 Spin_Up_Time            0x0007   150   150   024    Pre-fail  Always       -       202 (Average 195)
>   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       20
>   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       2
>   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
>   8 Seek_Time_Performance   0x0005   128   128   020    Pre-fail  Offline      -       18
>   9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16674
>  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
>  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       20
> 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       685
> 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       685
> 194 Temperature_Celsius     0x0002   187   187   000    Old_age   Always       -       32 (Min/Max 25/54)
> 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       2
> 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
> 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       630
> 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
> -----------------------------------------
>
>
> My questions are:
>
> How serious is this error? The number of Offline_Uncorrectable seems to be
> stable right now.
>
> Why isn't the SMART value decreasing and still at 100? (I assume it is
> because the damage is still very small).
>
> If it is not critical to swap this disc right now, how can I prevent that
> I get the notification from smartd every day? Basically I only want to be
> notified when the values are changing, again.
>
> Thank you in advance for any insight you might be able to give. Please let
> me know if you have any questions.
>
> Best regards
>
> Carsten
>
>
> _______________________________________________
> Smartmontools-support mailing list
> Smartmontools-support at listi.jpberlin.de
> https://listi.jpberlin.de/mailman/listinfo/smartmontools-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20190910/08814468/attachment.html>


More information about the Smartmontools-support mailing list