[Smartmontools-database] smartctl-Samsung_SSD_860_PRO_2TB
Roy
roybatty2019 at yahoo.com
Fri Dec 18 16:14:24 CET 2020
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===Device Model: Samsung SSD 860 PRO 2TBSerial Number: S42KNF0M502409VLU WWN Device Id: 5 002538 e4109632aFirmware Version: RVM01B6QUser Capacity: 2,048,408,248,320 bytes [2.04 TB]Sector Size: 512 bytes logical/physicalRotation Rate: Solid State DeviceForm Factor: 2.5 inchesDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Fri Dec 18 16:02:21 2020 CETSMART support is: Available - device has SMART capability.SMART support is: EnabledAAM feature is: UnavailableAPM feature is: UnavailableRd look-ahead is: EnabledWrite cache is: EnabledDSN feature is: UnavailableATA Security is: Disabled, frozen [SEC2]Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===SMART Status not supported: Incomplete response, ATA output registers missingSMART overall-health self-assessment test result: PASSEDWarning: This result is based on an Attribute check.
General SMART Values:Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offline data collection: ( 0) seconds.Offline data collectioncapabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. General Purpose Logging supported.Short self-test routine recommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 160) minutes.SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.
SMART Attributes Data Structure revision number: 1Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 8230 12 Power_Cycle_Count -O--CK 099 099 000 - 45177 Wear_Leveling_Count PO--C- 099 099 000 - 4179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0183 Runtime_Bad_Block PO--C- 100 100 010 - 0187 Reported_Uncorrect -O--CK 100 100 000 - 0190 Airflow_Temperature_Cel -O--CK 056 047 000 - 44195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0235 Unknown_Attribute -O--C- 099 099 000 - 35241 Total_LBAs_Written -O--CK 099 099 000 - 13515282615 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning
General Purpose Log Directory Version 1SMART Log Directory Version 1 [multi-sector log support]Address Access R/W Size Description0x00 GPL,SL R/O 1 Log Directory0x01 SL R/O 1 Summary SMART error log0x02 SL R/O 1 Comprehensive SMART error log0x03 GPL R/O 1 Ext. Comprehensive SMART error log0x04 GPL,SL R/O 8 Device Statistics log0x06 SL R/O 1 SMART self-test log0x07 GPL R/O 1 Extended self-test log0x09 SL R/W 1 Selective self-test log0x10 GPL R/O 1 NCQ Command Error log0x11 GPL R/O 1 SATA Phy Event Counters log0x13 GPL R/O 1 SATA NCQ Send and Receive log0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log0x80-0x9f GPL,SL R/W 16 Host vendor specific log0xa1 SL VS 16 Device vendor specific log0xa5 SL VS 16 Device vendor specific log0xce-0xcf SL VS 16 Device vendor specific log0xe0 GPL,SL R/W 1 SCT Command/Status0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 8230 -
SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3SCT Version (vendor specific): 256 (0x0100)Device State: Active (0)Current Temperature: 44 CelsiusPower Cycle Min/Max Temperature: 41/46 CelsiusLifetime Min/Max Temperature: 28/53 CelsiusSpecified Max Operating Temperature: 70 CelsiusUnder/Over Temperature Limit Count: 0/0SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2Temperature Sampling Period: 1 minuteTemperature Logging Interval: 10 minutesMin/Max recommended Temperature: 0/70 CelsiusMin/Max Temperature Limit: 0/70 CelsiusTemperature History Size (Index): 128 (28)
Index Estimated Time Temperature Celsius 29 2020-12-17 18:50 45 ************************** 30 2020-12-17 19:00 44 ************************* 31 2020-12-17 19:10 45 ************************** ... ..( 3 skipped). .. ************************** 35 2020-12-17 19:50 45 ************************** 36 2020-12-17 20:00 44 ************************* 37 2020-12-17 20:10 43 ************************ ... ..( 86 skipped). .. ************************ 124 2020-12-18 10:40 43 ************************ 125 2020-12-18 10:50 42 *********************** 126 2020-12-18 11:00 41 ********************** 127 2020-12-18 11:10 42 *********************** ... ..( 4 skipped). .. *********************** 4 2020-12-18 12:00 42 *********************** 5 2020-12-18 12:10 43 ************************ 6 2020-12-18 12:20 42 *********************** 7 2020-12-18 12:30 42 *********************** 8 2020-12-18 12:40 42 *********************** 9 2020-12-18 12:50 43 ************************ ... ..( 5 skipped). .. ************************ 15 2020-12-18 13:50 43 ************************ 16 2020-12-18 14:00 42 *********************** 17 2020-12-18 14:10 43 ************************ ... ..( 10 skipped). .. ************************ 28 2020-12-18 16:00 43 ************************
SMART WRITE LOG does not return COUNT and LBA_LOW registerSCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04)Page Offset Size Value Flags Description0x01 ===== = = === == General Statistics (rev 1) ==0x01 0x008 4 45 --- Lifetime Power-On Resets0x01 0x010 4 8230 --- Power-on Hours0x01 0x018 6 13515282615 --- Logical Sectors Written0x01 0x020 6 161311470 --- Number of Write Commands0x01 0x028 6 8203586119 --- Logical Sectors Read0x01 0x030 6 65485279 --- Number of Read Commands0x01 0x038 6 3571000 --- Date and Time TimeStamp0x04 ===== = = === == General Errors Statistics (rev 1) ==0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors0x04 0x010 4 66 --- Resets Between Cmd Acceptance and Completion0x05 ===== = = === == Temperature Statistics (rev 1) ==0x05 0x008 1 44 --- Current Temperature0x05 0x020 1 53 --- Highest Temperature0x05 0x028 1 28 --- Lowest Temperature0x05 0x058 1 70 --- Specified Maximum Operating Temperature0x06 ===== = = === == Transport Statistics (rev 1) ==0x06 0x008 4 516 --- Number of Hardware Resets0x06 0x010 4 0 --- Number of ASR Events0x06 0x018 4 0 --- Number of Interface CRC Errors0x07 ===== = = === == Solid State Device Statistics (rev 1) ==0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)ID Size Value Description0x0001 2 0 Command failed due to ICRC error0x0002 2 0 R_ERR response for data FIS0x0003 2 0 R_ERR response for device-to-host data FIS0x0004 2 0 R_ERR response for host-to-device data FIS0x0005 2 0 R_ERR response for non-data FIS0x0006 2 0 R_ERR response for device-to-host non-data FIS0x0007 2 0 R_ERR response for host-to-device non-data FIS0x0008 2 0 Device-to-host non-data FIS retries0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy0x000a 2 15 Device-to-host register FISes sent due to a COMRESET0x000b 2 0 CRC errors within host-to-device FIS0x000d 2 0 Non-CRC errors within host-to-device FIS0x000f 2 0 R_ERR response for host-to-device data FIS, CRC0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20201218/ca8ee5fa/attachment-0001.htm>
More information about the Smartmontools-database
mailing list