<html><head></head><body><div class="yahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div><div><div>smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)</div><div>Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org</div><div><br></div><div>=== START OF INFORMATION SECTION ===</div><div>Device Model: Samsung SSD 860 PRO 2TB</div><div>Serial Number: S42KNF0M502409V</div><div>LU WWN Device Id: 5 002538 e4109632a</div><div>Firmware Version: RVM01B6Q</div><div>User Capacity: 2,048,408,248,320 bytes [2.04 TB]</div><div>Sector Size: 512 bytes logical/physical</div><div>Rotation Rate: Solid State Device</div><div>Form Factor: 2.5 inches</div><div>Device is: Not in smartctl database [for details use: -P showall]</div><div>ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5</div><div>SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)</div><div>Local Time is: Fri Dec 18 16:02:21 2020 CET</div><div>SMART support is: Available - device has SMART capability.</div><div>SMART support is: Enabled</div><div>AAM feature is: Unavailable</div><div>APM feature is: Unavailable</div><div>Rd look-ahead is: Enabled</div><div>Write cache is: Enabled</div><div>DSN feature is: Unavailable</div><div>ATA Security is: Disabled, frozen [SEC2]</div><div>Wt Cache Reorder: Unknown</div><div><br></div><div>=== START OF READ SMART DATA SECTION ===</div><div>SMART Status not supported: Incomplete response, ATA output registers missing</div><div>SMART overall-health self-assessment test result: PASSED</div><div>Warning: This result is based on an Attribute check.</div><div><br></div><div>General SMART Values:</div><div>Offline data collection status: (0x00)<span style="white-space: pre-wrap;"> </span>Offline data collection activity</div><div><span style="white-space: pre-wrap;"> </span>was never started.</div><div><span style="white-space: pre-wrap;"> </span>Auto Offline Data Collection: Disabled.</div><div>Self-test execution status: ( 0)<span style="white-space: pre-wrap;"> </span>The previous self-test routine completed</div><div><span style="white-space: pre-wrap;"> </span>without error or no self-test has ever </div><div><span style="white-space: pre-wrap;"> </span>been run.</div><div>Total time to complete Offline </div><div>data collection: <span style="white-space: pre-wrap;"> </span>( 0) seconds.</div><div>Offline data collection</div><div>capabilities: <span style="white-space: pre-wrap;"> </span> (0x53) SMART execute Offline immediate.</div><div><span style="white-space: pre-wrap;"> </span>Auto Offline data collection on/off support.</div><div><span style="white-space: pre-wrap;"> </span>Suspend Offline collection upon new</div><div><span style="white-space: pre-wrap;"> </span>command.</div><div><span style="white-space: pre-wrap;"> </span>No Offline surface scan supported.</div><div><span style="white-space: pre-wrap;"> </span>Self-test supported.</div><div><span style="white-space: pre-wrap;"> </span>No Conveyance Self-test supported.</div><div><span style="white-space: pre-wrap;"> </span>Selective Self-test supported.</div><div>SMART capabilities: (0x0003)<span style="white-space: pre-wrap;"> </span>Saves SMART data before entering</div><div><span style="white-space: pre-wrap;"> </span>power-saving mode.</div><div><span style="white-space: pre-wrap;"> </span>Supports SMART auto save timer.</div><div>Error logging capability: (0x01)<span style="white-space: pre-wrap;"> </span>Error logging supported.</div><div><span style="white-space: pre-wrap;"> </span>General Purpose Logging supported.</div><div>Short self-test routine </div><div>recommended polling time: <span style="white-space: pre-wrap;"> </span> ( 2) minutes.</div><div>Extended self-test routine</div><div>recommended polling time: <span style="white-space: pre-wrap;"> </span> ( 160) minutes.</div><div>SCT capabilities: <span style="white-space: pre-wrap;"> </span> (0x003d)<span style="white-space: pre-wrap;"> </span>SCT Status supported.</div><div><span style="white-space: pre-wrap;"> </span>SCT Error Recovery Control supported.</div><div><span style="white-space: pre-wrap;"> </span>SCT Feature Control supported.</div><div><span style="white-space: pre-wrap;"> </span>SCT Data Table supported.</div><div><br></div><div>SMART Attributes Data Structure revision number: 1</div><div>Vendor Specific SMART Attributes with Thresholds:</div><div>ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE</div><div> 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0</div><div> 9 Power_On_Hours -O--CK 098 098 000 - 8230</div><div> 12 Power_Cycle_Count -O--CK 099 099 000 - 45</div><div>177 Wear_Leveling_Count PO--C- 099 099 000 - 4</div><div>179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0</div><div>181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0</div><div>182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0</div><div>183 Runtime_Bad_Block PO--C- 100 100 010 - 0</div><div>187 Reported_Uncorrect -O--CK 100 100 000 - 0</div><div>190 Airflow_Temperature_Cel -O--CK 056 047 000 - 44</div><div>195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0</div><div>199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0</div><div>235 Unknown_Attribute -O--C- 099 099 000 - 35</div><div>241 Total_LBAs_Written -O--CK 099 099 000 - 13515282615</div><div> ||||||_ K auto-keep</div><div> |||||__ C event count</div><div> ||||___ R error rate</div><div> |||____ S speed/performance</div><div> ||_____ O updated online</div><div> |______ P prefailure warning</div><div><br></div><div>General Purpose Log Directory Version 1</div><div>SMART Log Directory Version 1 [multi-sector log support]</div><div>Address Access R/W Size Description</div><div>0x00 GPL,SL R/O 1 Log Directory</div><div>0x01 SL R/O 1 Summary SMART error log</div><div>0x02 SL R/O 1 Comprehensive SMART error log</div><div>0x03 GPL R/O 1 Ext. Comprehensive SMART error log</div><div>0x04 GPL,SL R/O 8 Device Statistics log</div><div>0x06 SL R/O 1 SMART self-test log</div><div>0x07 GPL R/O 1 Extended self-test log</div><div>0x09 SL R/W 1 Selective self-test log</div><div>0x10 GPL R/O 1 NCQ Command Error log</div><div>0x11 GPL R/O 1 SATA Phy Event Counters log</div><div>0x13 GPL R/O 1 SATA NCQ Send and Receive log</div><div>0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log</div><div>0x80-0x9f GPL,SL R/W 16 Host vendor specific log</div><div>0xa1 SL VS 16 Device vendor specific log</div><div>0xa5 SL VS 16 Device vendor specific log</div><div>0xce-0xcf SL VS 16 Device vendor specific log</div><div>0xe0 GPL,SL R/W 1 SCT Command/Status</div><div>0xe1 GPL,SL R/W 1 SCT Data Transfer</div><div><br></div><div>SMART Extended Comprehensive Error Log Version: 1 (1 sectors)</div><div>No Errors Logged</div><div><br></div><div>SMART Extended Self-test Log Version: 1 (1 sectors)</div><div>Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error</div><div># 1 Short offline Completed without error 00% 8230 -</div><div><br></div><div>SMART Selective self-test log data structure revision number 1</div><div> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS</div><div> 1 0 0 Not_testing</div><div> 2 0 0 Not_testing</div><div> 3 0 0 Not_testing</div><div> 4 0 0 Not_testing</div><div> 5 0 0 Not_testing</div><div>Selective self-test flags (0x0):</div><div> After scanning selected spans, do NOT read-scan remainder of disk.</div><div>If Selective self-test is pending on power-up, resume after 0 minute delay.</div><div><br></div><div>SCT Status Version: 3</div><div>SCT Version (vendor specific): 256 (0x0100)</div><div>Device State: Active (0)</div><div>Current Temperature: 44 Celsius</div><div>Power Cycle Min/Max Temperature: 41/46 Celsius</div><div>Lifetime Min/Max Temperature: 28/53 Celsius</div><div>Specified Max Operating Temperature: 70 Celsius</div><div>Under/Over Temperature Limit Count: 0/0</div><div>SMART Status: 0xc24f (PASSED)</div><div><br></div><div>SCT Temperature History Version: 2</div><div>Temperature Sampling Period: 1 minute</div><div>Temperature Logging Interval: 10 minutes</div><div>Min/Max recommended Temperature: 0/70 Celsius</div><div>Min/Max Temperature Limit: 0/70 Celsius</div><div>Temperature History Size (Index): 128 (28)</div><div><br></div><div>Index Estimated Time Temperature Celsius</div><div> 29 2020-12-17 18:50 45 **************************</div><div> 30 2020-12-17 19:00 44 *************************</div><div> 31 2020-12-17 19:10 45 **************************</div><div> ... ..( 3 skipped). .. **************************</div><div> 35 2020-12-17 19:50 45 **************************</div><div> 36 2020-12-17 20:00 44 *************************</div><div> 37 2020-12-17 20:10 43 ************************</div><div> ... ..( 86 skipped). .. ************************</div><div> 124 2020-12-18 10:40 43 ************************</div><div> 125 2020-12-18 10:50 42 ***********************</div><div> 126 2020-12-18 11:00 41 **********************</div><div> 127 2020-12-18 11:10 42 ***********************</div><div> ... ..( 4 skipped). .. ***********************</div><div> 4 2020-12-18 12:00 42 ***********************</div><div> 5 2020-12-18 12:10 43 ************************</div><div> 6 2020-12-18 12:20 42 ***********************</div><div> 7 2020-12-18 12:30 42 ***********************</div><div> 8 2020-12-18 12:40 42 ***********************</div><div> 9 2020-12-18 12:50 43 ************************</div><div> ... ..( 5 skipped). .. ************************</div><div> 15 2020-12-18 13:50 43 ************************</div><div> 16 2020-12-18 14:00 42 ***********************</div><div> 17 2020-12-18 14:10 43 ************************</div><div> ... ..( 10 skipped). .. ************************</div><div> 28 2020-12-18 16:00 43 ************************</div><div><br></div><div>SMART WRITE LOG does not return COUNT and LBA_LOW register</div><div>SCT (Get) Error Recovery Control command failed</div><div><br></div><div>Device Statistics (GP Log 0x04)</div><div>Page Offset Size Value Flags Description</div><div>0x01 ===== = = === == General Statistics (rev 1) ==</div><div>0x01 0x008 4 45 --- Lifetime Power-On Resets</div><div>0x01 0x010 4 8230 --- Power-on Hours</div><div>0x01 0x018 6 13515282615 --- Logical Sectors Written</div><div>0x01 0x020 6 161311470 --- Number of Write Commands</div><div>0x01 0x028 6 8203586119 --- Logical Sectors Read</div><div>0x01 0x030 6 65485279 --- Number of Read Commands</div><div>0x01 0x038 6 3571000 --- Date and Time TimeStamp</div><div>0x04 ===== = = === == General Errors Statistics (rev 1) ==</div><div>0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors</div><div>0x04 0x010 4 66 --- Resets Between Cmd Acceptance and Completion</div><div>0x05 ===== = = === == Temperature Statistics (rev 1) ==</div><div>0x05 0x008 1 44 --- Current Temperature</div><div>0x05 0x020 1 53 --- Highest Temperature</div><div>0x05 0x028 1 28 --- Lowest Temperature</div><div>0x05 0x058 1 70 --- Specified Maximum Operating Temperature</div><div>0x06 ===== = = === == Transport Statistics (rev 1) ==</div><div>0x06 0x008 4 516 --- Number of Hardware Resets</div><div>0x06 0x010 4 0 --- Number of ASR Events</div><div>0x06 0x018 4 0 --- Number of Interface CRC Errors</div><div>0x07 ===== = = === == Solid State Device Statistics (rev 1) ==</div><div>0x07 0x008 1 0 N-- Percentage Used Endurance Indicator</div><div> |||_ C monitored condition met</div><div> ||__ D supports DSN</div><div> |___ N normalized value</div><div><br></div><div>Pending Defects log (GP Log 0x0c) not supported</div><div><br></div><div>SATA Phy Event Counters (GP Log 0x11)</div><div>ID Size Value Description</div><div>0x0001 2 0 Command failed due to ICRC error</div><div>0x0002 2 0 R_ERR response for data FIS</div><div>0x0003 2 0 R_ERR response for device-to-host data FIS</div><div>0x0004 2 0 R_ERR response for host-to-device data FIS</div><div>0x0005 2 0 R_ERR response for non-data FIS</div><div>0x0006 2 0 R_ERR response for device-to-host non-data FIS</div><div>0x0007 2 0 R_ERR response for host-to-device non-data FIS</div><div>0x0008 2 0 Device-to-host non-data FIS retries</div><div>0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy</div><div>0x000a 2 15 Device-to-host register FISes sent due to a COMRESET</div><div>0x000b 2 0 CRC errors within host-to-device FIS</div><div>0x000d 2 0 Non-CRC errors within host-to-device FIS</div><div>0x000f 2 0 R_ERR response for host-to-device data FIS, CRC</div><div>0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC</div><div>0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC</div><div>0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC</div><div><br></div></div><br></div></div></body></html>