[Tiptoi] French pens rejecting custom GME - German vs French hardware difference?

Sa Mär 28 16:27:04 CET 2026

2 days ago. Quoting here:

Dominik via tiptoi
Thu, Mar 26, 8:31 AM (2 days ago)
to *handy*, Die
Hi Gaëlle,

Just to be sure, you didn't forget: are you sure the gme you are trying
to use is "FRENCH" (tttool set-language)?

Because sometimes I had the impression (I didn't do extensive tests)
that a gme without language information (which should work on any pen)
did not work on special pens - so I added the pen's language.

Just to be clear: if your pen is French, every gme must have 'FRENCH' as
the language (or none at all) - so if you want to try an Italian or
German gme, you must use tttool set-language FRENCH.

I have a second-generation pen with French firmware - I could test it
for you over the weekend. And I have a third-generation pen with a lot
of French books (but with German firmware - because there is no French
firmware).

Did you try unpacking and packing the gme with tttool.

Best Regards,
Dominik

Version Française:

Pour être sûr, vous n'avez pas oublié: êtes-vous sûr que le gme que vous
essayez d'utiliser est "FRENCH" (tttool set-language) ?

Parce qu parfois j'ai eu l'impression (je n'ai pas fait de tests
approfondis) qu'un gme sans information de langue (qui devrait
fonctionner sur n'importe quel stylo) ne fonctionnait pas sur certains
stylos - alors j'ai ajouté la langue du stylo.

Pour être clair : si votre stylo est en français, chaque gme doit avoir
'FRENCH' comme langue (ou aucune) - donc si vous voulez essayer un gme
italien ou allemand, vous devez utiliser tttool set-language FRENCH.

J'ai un stylo de deuxième génération avec un firmware français - je
pourrais le tester pour vous ce week-end. Et j'ai un stylo de troisième
génération avec beaucoup de livres en français (mais avec un firmware
allemand - parce qu'il n'y a pas de firmware français).

Avez-vous essayé de décompacter et de compacter le gme avec tttool.

Cordialement,
Dominik

On Sat, Mar 28, 2026 at 5:22 PM Gaëlle Mamou <gaelle-r6 at hotmail.fr> wrote:

> Hello Marius,
>
> No I haven't seen email from Dominik, can you tell me when he sent it?
>
>
> Thank you
>
>
> Gaëlle
>
>
> Envoyé à partir de Outlook pour Android <https://aka.ms/AAb9ysg>
> ------------------------------
> *From:* Marius Andreiana <marius.andreiana at gmail.com>
> *Sent:* Saturday, March 28, 2026 3:52:48 PM
> *To:* Die Mailingliste für Tiptoi-Bastler <tiptoi at listi.jpberlin.de>
> *Cc:* Gaëlle Mamou <gaelle-r6 at hotmail.fr>
> *Subject:* Re: [Tiptoi] French pens rejecting custom GME - German vs
> French hardware difference?
>
> Hi Gaelle,
>
> Did you see the email from Dominik sent to the list? You didn't reply to
> that.
> In our email exchanges I also asked you to tttool set-language FRENCH, you
> said there was no effect. Maybe you could try this again after reading
> Dominik's reply? To make sure it worked, compare extracted yaml's
> from Book.gme with Custom.gme. Send these to the list too.
>
> Marius
>
>
> On Thu, Mar 26, 2026 at 4:16 PM Gaëlle Mamou via tiptoi <
> tiptoi at listi.jpberlin.de> wrote:
>
> Hi Marius,
> Test results with Product ID 1 (French book "Je découvre la Ferme"):
> Test 1: Book START code + Book GME = Works
> Test 2: Book START code + Custom GME = "Fichier introuvable"
> Test 3: Printed START code + Book GME = Works!
> Test 4: Printed START code + Custom GME = "Fichier introuvable"
> Key finding: Test 3 proves my printed OID codes work perfectly! The pen
> can read them and successfully loads the official Ravensburger GME.
> This confirms:
>
>    - Printing quality is fine
>    - OID codes are correctly recognized
>    - The pen specifically rejects custom GME files (both tttool and
>    SoniqPen)
>
> There must be something in the custom GME structure that my French pens
> don't accept, even though the exact same files work on your German pen.
> Any ideas what could cause this systematic rejection of custom GMEs while
> accepting official ones?
> Thanks!
> Gaëlle
> ------------------------------
> *Envoie ça à Marius !* 📧
> C'est une info TRÈS importante ! 🎯
>
> ------------------------------
> *De :* tiptoi <tiptoi-bounces at listi.jpberlin.de> de la part de Marius
> Andreiana via tiptoi <tiptoi at listi.jpberlin.de>
> *Envoyé :* mercredi 25 mars 2026 17:17
> *À :* Die Mailingliste für Tiptoi-Bastler <tiptoi at listi.jpberlin.de>
> *Cc :* Marius Andreiana <marius.andreiana at gmail.com>
> *Objet :* Re: [Tiptoi] French pens rejecting custom GME - German vs
> French hardware difference?
>
> I personally wouldn't try flashing a firmware due to risks of bricking the
> pen. There must be something we are missing, since the pen is functional.
>
> Would anybody on the list be kind enough to print the PDF sent by Gaelle
> and try it with the .gme also on the thread? It worked for my on my German
> pen.
> Does anybody have a French pen? Does it have the same issues?
>
> Gaelle, would you please try again setting the same product id as one of
> your French books? And also have a custom OID region with a sound. Using
> tttool or in the SoniqPen studio just change product id. The Power on also
> should be set to play a sound.
> So we have:
> 1) original Book power on, Book region
> 2) printed power on, region
> 3) Book gme, custom gme
>
> Your pen doesn't work with printed & custom gme.
> with  custom .gme: if you scan the original book power on, will it do
> anything?
> with book .gme: scan the printed power on, will it start same as the book
> starts?
> (remember to "empty trash" after you delete .gme from pen)
>
> Marius
>
>
> On Wed, Mar 25, 2026 at 4:24 PM Ulrich Sibiller via tiptoi <
> tiptoi at listi.jpberlin.de> wrote:
>
> Well, they have different firmware files, AFAIR. So maybe they are
> more strict in checking stuff. Maybe they enforce a certain structure
> or something which the French books fulfill but not the (older) German
> ones.
>
> You could try to flash a German firmware and see if that changes the
> situation.
>
> Uli
>
> On Wed, Mar 25, 2026 at 3:05 PM Gaëlle Mamou via tiptoi
> <tiptoi at listi.jpberlin.de> wrote:
> >
> > Hello everyone,
> >
> > As I'm quite persistent and this project is really important to me, I
> looked for another solution and
> > after numerous tests, I made an interesting discovery:
> >
> > Observation:
> > My custom GME files (with French audio) are rejected by both of my
> French Tiptoi styluses (first and latest generation).
> > These same GME files work perfectly on Marius's German stylus (tested by
> Marius himself).
> > The official Ravensburger GME files work correctly on my French styluses
> (original or printed).
> >
> > My question:
> > Is there a known hardware or software difference between the French and
> German Tiptoi styluses that could explain this problem?
> > Or is it more likely that my two styluses are defective or have a
> specific configuration, and that other French styluses accept custom GME
> files normally?
> >
> > Has anyone ever successfully used custom GME files (tttool/SoniqPen) on
> French Tiptoi styluses purchased in France?
> >
> > I'm considering buying a German Tiptoi stylus to solve this problem, but
> I'd like to know if this is a systematic difference between French and
> German styluses, or simply a problem with my device.
> >
> > Thanks in advance for your help!
> >
> > Gaëlle
> > --
> > tiptoi mailing list
> > tiptoi at listi.jpberlin.de
> > https://listi.jpberlin.de/mailman/listinfo/tiptoi
> --
> tiptoi mailing list
> tiptoi at listi.jpberlin.de
> https://listi.jpberlin.de/mailman/listinfo/tiptoi
>
> --
> tiptoi mailing list
> tiptoi at listi.jpberlin.de
> https://listi.jpberlin.de/mailman/listinfo/tiptoi
>
>
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <https://listi.jpberlin.de/pipermail/tiptoi/attachments/20260328/dbce836f/attachment.htm>