[smartmontools-support] ATA errors and unknown tests with invalid timestamps
Julien Cassette
julien.cassette at gmail.com
Fri Dec 2 19:12:58 CET 2022
Hello
One of my disks reports very weird SMART data.
It shows ATA errors and unknown tests with invalid timestamps (see below).
The most recent test is one I started myself.
Do you have any idea on the cause of the issue?
Regards,
Julien
# smartctl -a /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.142+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron Client SSDs
Device Model: Crucial_CT275MX300SSD1
Serial Number: 163113837AD7
LU WWN Device Id: 5 00a075 113837ad7
Firmware Version: M0CR070
User Capacity: 275,064,201,216 bytes [275 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Dec 2 18:26:22 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 728) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail
Always - 14284
5 Reallocate_NAND_Blk_Cnt 0x0032 069 069 010 Old_age
Always - 340
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 7699
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 2525
171 Program_Fail_Count 0x0032 100 100 000 Old_age
Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age
Always - 0
173 Ave_Block-Erase_Count 0x0032 090 090 000 Old_age
Always - 163
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age
Always - 66
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age
Always - 0
184 Error_Correction_Count 0x0032 100 100 000 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 21007
194 Temperature_Celsius 0x0022 074 048 000 Old_age
Always - 26 (Min/Max 14/52)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 340
197 Current_Pending_ECC_Cnt 0x0032 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age
Always - 0
202 Percent_Lifetime_Remain 0x0030 090 090 001 Old_age
Offline - 10
206 Write_Error_Rate 0x000e 100 100 000 Old_age
Always - 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age
Always - 29002455006
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age
Always - 908200276
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age
Always - 1463262622
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail
Always - 908
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age
Always - 4040
SMART Error Log Version: 1
ATA Error Count: 21007 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 21007 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a8 eb 99 40 Error: UNC at LBA = 0x0099eba8 = 10087336
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 a8 ed 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 ec 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 eb 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 ea 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 e9 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
Error 21006 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a8 eb 99 40 Error: UNC at LBA = 0x0099eba8 = 10087336
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 a8 ed 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 ec 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 eb 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 ea 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
60 00 00 a8 e9 99 40 00 14d+11:09:12.704 READ FPDMA QUEUED
Error 21005 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a8 eb 99 40 Error: UNC at LBA = 0x0099eba8 = 10087336
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 c0 89 d6 40 00 14d+03:21:12.704 READ FPDMA QUEUED
60 00 00 98 44 be 40 00 14d+03:21:12.704 READ FPDMA QUEUED
60 00 00 a8 ed 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
60 00 00 a8 ec 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
60 00 00 a8 eb 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
Error 21004 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 c0 eb 99 40 Error: UNC at LBA = 0x0099ebc0 = 10087360
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 c0 eb 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
61 00 20 60 6a 8c 40 00 14d+03:21:12.704 WRITE FPDMA QUEUED
60 00 20 a0 eb 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
61 00 20 40 6a 8c 40 00 14d+03:21:12.704 WRITE FPDMA QUEUED
60 00 20 80 eb 99 40 00 14d+03:21:12.704 READ FPDMA QUEUED
Error 21003 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a8 eb 99 40 Error: UNC at LBA = 0x0099eba8 = 10087336
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 40 bb ce 40 00 14d+03:19:12.704 READ FPDMA QUEUED
60 00 40 65 a7 fc 40 00 14d+03:19:12.704 READ FPDMA QUEUED
60 01 00 a8 ed 99 40 00 14d+03:19:12.704 READ FPDMA QUEUED
60 00 00 a8 ec 99 40 00 14d+03:19:12.704 READ FPDMA QUEUED
60 01 00 a8 eb 99 40 00 14d+03:19:12.704 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7699 -
# 2 Vendor (0xe0) Unknown status (0xc) 50% 18418 -
# 3 Reserved (0x0c) Unknown status (0xe) 110% 39168 -
# 4 Vendor (0xf2) Completed: unknown failure 70% 0
260046880
# 5 Offline Completed without error 00% 0 -
# 6 Vendor (0xf2) Completed: unknown failure 70% 16384
3943475201
# 7 Offline Unknown status (0x9) 90% 16384 -
# 8 Offline Completed without error 00% 0 -
# 9 Offline Completed: unknown failure 00% 96
4715205
#10 Offline Completed without error 00% 0 -
#11 Offline Completed: unknown failure 00% 96
4715205
#12 Offline Interrupted (host reset) 00% 8192 -
#13 Vendor (0x61) Completed without error 00% 50656 -
#14 Offline Completed: handling damage?? 00% 60172
1614807193
#15 Vendor (0x40) Completed without error 80% 20992 -
#16 Short offline Unknown status (0xa) 80% 60684 -
#17 Vendor (0xe0) Unknown status (0xc) 50% 18418 -
#18 Reserved (0x0c) Unknown status (0xe) 100% 39168 -
#19 Vendor (0xf8) Completed without error 50% 256 -
#20 Vendor (0xeb) Completed without error 00% 153 -
#21 Vendor (0xf2) Completed: unknown failure 70% 256
213909536
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
More information about the Smartmontools-support
mailing list