[smartmontools-support] SSD bug ?
A. Kapetanovic
aka at alphanet.ch
Mon Oct 26 09:53:13 CET 2020
Hi,
The SSD on my laptop seams to have problems (loss of data) ; so I am trying to look about with smartctl but can't believe the results : all what I did :
smartctl -t short /dev/nvme0n1p5
smartctl -t long /dev/nvme0n1p5
smartctl -x /dev/nvme0n1p5
Has instantaneous results. I don't understand, did I a mistake ?
Regards,
aka
# smartctl -t short /dev/nvme0n1p5
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-52-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
NVMe device successfully opened
Use 'smartctl -a' (or '-x') to print SMART (and more) information
# smartctl -t long /dev/nvme0n1p5
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-52-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
NVMe device successfully opened
Use 'smartctl -a' (or '-x') to print SMART (and more) information
# smartctl -x /dev/nvme0n1p5
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-52-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: SAMSUNG MZVLQ512HALU-00000
Serial Number: S4Y4NF0N221020
Firmware Version: FXV7000Q
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 512’110’190’592 [512 GB]
Unallocated NVM Capacity: 0
Controller ID: 5
Number of Namespaces: 1
Namespace 1 Size/Capacity: 512’110’190’592 [512 GB]
Namespace 1 Utilization: 167’482’105’856 [167 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 a201b2a36d
Local Time is: Mon Oct 26 08:35:06 2020 CET
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 82 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 4.83W - - 0 0 0 0 0 0
1 + 3.54W - - 1 1 1 1 0 0
2 + 3.04W - - 2 2 2 2 0 500
3 - 0.0500W - - 3 3 3 3 210 1200
4 - 0.0050W - - 4 4 4 4 1000 9000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 16 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 1’975’725 [1.01 TB]
Data Units Written: 2’051’471 [1.05 TB]
Host Read Commands: 16’269’622
Host Write Commands: 27’703’781
Controller Busy Time: 706
Power Cycles: 192
Power On Hours: 76
Unsafe Shutdowns: 32
Media and Data Integrity Errors: 0
Error Information Log Entries: 74
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 16 Celsius
Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged
# df
Sys. de fichiers blocs de 1K Utilisé Disponible Uti% Monté sur
udev 8055688 0 8055688 0% /dev
tmpfs 1619780 2056 1617724 1% /run
/dev/nvme0n1p5 224554636 109230588 103847620 52% /
tmpfs 8098884 104128 7994756 2% /dev/shm
tmpfs 5120 4 5116 1% /run/lock
tmpfs 8098884 0 8098884 0% /sys/fs/cgroup
/dev/loop0 56320 56320 0 100% /snap/core18/1880
/dev/loop1 166784 166784 0 100% /snap/gnome-3-28-1804/145
/dev/loop2 56704 56704 0 100% /snap/core18/1885
/dev/loop3 223232 223232 0 100% /snap/gnome-3-34-1804/60
/dev/loop5 31744 31744 0 100% /snap/snapd/9721
/dev/loop4 63616 63616 0 100% /snap/gtk-common- themes/1506
/dev/loop7 44288 44288 0 100% /snap/snap-store/415
/dev/loop8 31744 31744 0 100% /snap/snapd/9607
/dev/loop6 51968 51968 0 100% /snap/snap-store/481
/dev/loop9 261760 261760 0 100% /snap/gnome-3-34-1804/36
/dev/nvme0n1p1 262144 33756 228388 13% /boot/efi
tmpfs 1619776 64 1619712 1% /run/user/1000
/dev/sda1 488384596 432934092 55450504 89% /media/amel/ 6E40F58028B5D26A
#
More information about the Smartmontools-support
mailing list