[smartmontools-support] Additional hardware compatibility test for smartmontools

[Dan Martin]

Yes, that's right.  I have them built into a RAID-5 array on a Raspberry Pi
to function as a NAS and they're working fine.

On Sat, Nov 23, 2019 at 3:39 PM Nathan Stratton Treadway <nathanst at ontko.com>
wrote:

> On Sat, Nov 23, 2019 at 15:03:49 -0500, Dan Martin wrote:
> > This is with four of those drives connected to a Raspberry Pi 4+ 4GB
> > through a Sabrent USB 3.0 powered hub:
> >
> > /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
> > /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
> >     |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
> >         |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
> >         |__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=uas, 5000M
> >         |__ Port 3: Dev 5, If 0, Class=Mass Storage, Driver=uas, 5000M
> >         |__ Port 4: Dev 6, If 0, Class=Mass Storage, Driver=uas, 5000M
> > /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
> >     |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
> >         |__ Port 2: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
>
> Great, thanks.
>
> I take it you've been able to use the drives normally in UAS mode (but
> with the :u flag turned off via the "usb-storage.quirks=0bc2:2343:"
> boot parameter) without any problems?
>
>                                                         Nathan
>
>
> ----------------------------------------------------------------------------
> Nathan Stratton Treadway  -  nathanst at ontko.com  -  Mid-Atlantic region
> Ray Ontko & Co.  -  Software consulting services  -
> http://www.ontko.com/
>  GPG Key: http://www.ontko.com/~nathanst/gpg_key.txt   ID: 1023D/ECFB6239
>  Key fingerprint = 6AD8 485E 20B9 5C71 231C  0C32 15F3 ADCD ECFB 6239
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20191123/0a727037/attachment.html>