[smartmontools-support] Tests take 1min on HDD!?
David Niklas
doark at mail.com
Thu May 30 04:35:49 CEST 2019
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
On Wed, 29 May 2019 22:30:16 -0400
David Niklas <doark at mail.com> wrote:
>
> The following is the output of smartctl -a /dev/sdb it says that long
> tests take only 1 min. I remember them taking a much longer time so I
> let my disk sit for 8 hours and then checked back (which is what you're
> seeing in the output).
> The SMART data says that the test passed and all is well, but I'm
> concerned (YES, I do have backups.) that the drives time to test is
> experiencing an integer overflow, much like it's power on hours have
> also experienced an integer overflow.
> I also have a second drive with the same problem but the power_on_hours
> have not yet wrapped.
> In a worst case scenario this would result in any testing of the HDD by
> the HDD being completely useless and I'd appreciate any advice you can
> give in this regard. I've never read or heard of this AFAIR and I did
> read the usual sources (man page, odd emails to this list, README, FAQ).
>
Oops, I sent the wrong drive info. It's my /dev/sda and /dev/sdc drives
that have this problem and their power_on_hours have not wrapped but 24
seconds is a really fast long test time for an HDD.
I'll paste the output of all 3 in order.
Again, thanks!
#######################################################################
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.14.119-nopreempt-AMDGPU-dav9] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Ultrastar 7K4000
Device Model: Hitachi HUS724030ALE641
Serial Number: P8GLNYJP
LU WWN Device Id: 5 000cca 22cc87d55
Firmware Version: MJ8OA5F0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 30 02:30:36 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 83
3 Spin_Up_Time 0x0007 137 137 024 Pre-fail Always - 416 (Average 494)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 335
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 44649
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 335
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 689
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 689
194 Temperature_Celsius 0x0002 153 153 000 Old_age Always - 39 (Min/Max 20/60)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 44643 -
# 2 Extended offline Completed without error 00% 41824 -
# 3 Extended offline Completed without error 00% 41728 -
# 4 Extended offline Completed without error 00% 36994 -
# 5 Short captive Completed without error 00% 36950 -
# 6 Vendor (0xb0) Completed without error 00% 36919 -
# 7 Vendor (0x71) Completed without error 00% 36918 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.14.119-nopreempt-AMDGPU-dav9] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar 7K3000
Device Model: Hitachi HUA723030ALA641
Serial Number: YVG1YWWC
LU WWN Device Id: 5 000cca 234c0e49c
Firmware Version: MKAOA840
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 30 02:30:37 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (29509) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 492) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 86
3 Spin_Up_Time 0x0007 147 147 024 Pre-fail Always - 426 (Average 627)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 292
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 125 125 020 Pre-fail Offline - 30
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 7685
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 289
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 299
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 299
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 20/60)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 125
SMART Error Log Version: 1
ATA Error Count: 125 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 125 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 b8 eb ff 0a Error: ICRC, ABRT at LBA = 0x0affebb8 = 184544184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 c8 78 3a 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 c0 38 35 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 b8 f8 2f 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 b0 b8 2a 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 a8 78 25 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
Error 124 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 30 c8 f0 ff 0a Error: ICRC, ABRT at LBA = 0x0afff0c8 = 184545480
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 c8 78 3a 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 c0 38 35 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 b8 f8 2f 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 b0 b8 2a 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
61 40 a8 78 25 00 40 08 04:34:15.811 WRITE FPDMA QUEUED
Error 123 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 30 08 b5 ff 0a Error: ICRC, ABRT at LBA = 0x0affb508 = 184530184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 40 d0 38 b7 ff 40 08 04:34:15.316 WRITE FPDMA QUEUED
61 40 c8 f8 b1 ff 40 08 04:34:15.316 WRITE FPDMA QUEUED
61 40 c0 b8 ac ff 40 08 04:34:15.293 WRITE FPDMA QUEUED
61 40 b8 78 a7 ff 40 08 04:34:15.286 WRITE FPDMA QUEUED
61 40 b0 38 a2 ff 40 08 04:34:15.278 WRITE FPDMA QUEUED
Error 122 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 57 08 60 09 Error: ICRC, ABRT at LBA = 0x09600857 = 157288535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 10 50 08 60 40 08 04:31:53.738 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 08 04:31:53.737 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 04:31:53.737 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 04:31:53.736 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 04:31:53.736 SET FEATURES [Set transfer mode]
Error 121 occurred at disk power-on lifetime: 127 hours (5 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 57 08 60 09 Error: ICRC, ABRT at LBA = 0x09600857 = 157288535
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 f0 50 08 60 40 08 04:31:53.252 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 08 04:31:53.244 FLUSH CACHE EXT
61 01 e0 08 08 60 40 08 04:31:53.244 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 08 04:31:53.244 FLUSH CACHE EXT
ea 00 00 00 00 00 a0 08 04:31:53.241 FLUSH CACHE EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 7680 -
# 2 Extended offline Completed without error 00% 4774 -
# 3 Extended offline Completed without error 00% 23 -
# 4 Short offline Completed without error 00% 43587 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.14.119-nopreempt-AMDGPU-dav9] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Ultrastar 7K4000
Device Model: Hitachi HUS724030ALE641
Serial Number: P8HKJSSR
LU WWN Device Id: 5 000cca 22cd610c0
Firmware Version: MJ8OA5F0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 30 02:30:38 2019 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 81
3 Spin_Up_Time 0x0007 138 138 024 Pre-fail Always - 411 (Average 490)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 326
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 45375
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 321
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 656
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 656
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 20/58)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 38311 hours (1596 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 01:16:03.705 IDENTIFY DEVICE
60 08 01 01 00 00 00 04 01:16:03.546 READ FPDMA QUEUED
60 08 01 01 00 00 a0 ff 01:16:02.837 READ FPDMA QUEUED
60 08 01 01 00 00 a0 ff 01:16:02.827 READ FPDMA QUEUED
60 08 01 01 00 00 a0 ff 01:16:02.787 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 45369 -
# 2 Extended offline Completed without error 00% 42454 -
# 3 Extended offline Completed without error 00% 37723 -
# 4 Short captive Completed without error 00% 37689 -
# 5 Vendor (0xb0) Completed without error 00% 37659 -
# 6 Vendor (0x71) Completed without error 00% 37659 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
#######################################################################
-----BEGIN PGP SIGNATURE-----
iQIzBAEBCAAdFiEEL2N7+xWmVOJDQxWGm3XCrhg2YP8FAlzvQYUACgkQm3XCrhg2
YP82/xAAy5adgt0p0tqLOh7q/LEhOybwiGtvqpN7amQss7tPxif9ZEVrGRMjrErY
2e+ZcLnJla6E5lQyPIzfxOl+btBGT7SgXaFrIxTc6NUsSHejCeJr0to3KcaLNsSH
4uNfTScw6lRpTFhhqFWbpKOanwIWKaFyJeBRe2OfwzOsj9eJSSIXZ1Nd5TtzUh5F
cASBOVXbqQ5l46e2Kni+CK8fQLDxZsY8X14G8F3vzTTcHRYcgCSQHigGJyRCVB7a
+p//g/gGLB3QyqlVqHifY8NwplkcK0QruEJzzibuQUEIGWxH+Ihh/S6GVgrOZK6H
NiZjh0H5MKXuSSUkchx3KXpgcrDqIes7Cl6z2oD0JgwQ6Oy6MTRQIQOF/Dc98lmy
mvaH42xXkFMglx4vKCO4Pd8VOi20CoAuosBZdLQU82ejwHnBBXxQpDsgTzIrlevx
JRHbIuEpXSLhh+rdEEohBAec7yLZxYjSJJADqRs8LMuUS+7hQwpgWW10VE2iqVX0
mSN/849uBcLyPtxDxj2V2UQJ00t5vG8V9an4hsInDb78+c/6FFx5F8/FjmKQyaGZ
UlPFR0vwQZfZtE38xH2XZCmRs6U8u56v3eeBHnqSPAjnTOVEuM4HTmISKSZkDhs7
RWRrmoQ3t9fMYzLFktNUslHtv3BvIxoAqoVg5tlxDYQbvJv3tng=
=mR1L
-----END PGP SIGNATURE-----
More information about the Smartmontools-support
mailing list