[smartmontools-support] ST12000NM0007 issue

Eyal Lebedinsky eyal at eyal.emu.id.au
Tue Apr 9 08:38:16 CEST 2019


[this is a resend as the original was delayed and maybe deleted as I was late to confirm my membership]

I see unusual errors in the smartctl report from the 12TB disk ST12000NM0007.

This is a smartmontools build from the downloaded tar file:
	https://sourceforge.net/projects/smartmontools/files/smartmontools/7.0/smartmontools-7.0.tar.gz/download

Package built with
./configure --sbindir=/home/eyal/smartmontools/sbin \
         --sysconfdir=/home/eyal/smartmontools/etc \
         --mandir=/home/eyal/smartmontools/share/man \
         --docdir=/home/eyal/smartmontools/share/doc/smartmontools \
         --with-initscriptdir=/home/eyal/smartmontools/etc/rc.d

and run as
	sudo smartmontools/sbin/smartctl -x /dev/sdc|less

With the result below - note the last two lines.

Regards

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.5-100.fc28.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Exos X12
Device Model:     ST12000NM0007-2A1101
Serial Number:    xxxxxxxx
LU WWN Device Id: 5 000c50 xxxxxxxxx
Firmware Version: SN02
User Capacity:    12,000,138,625,024 bytes [12.0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Apr  8 08:53:47 2019 AEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

-- 
Eyal at Home (eyal at eyal.emu.id.au)



More information about the Smartmontools-support mailing list