[Smartmontools-database] Integral V Series SATA SSD 120GB
Paul Bell
linux at dpb.org.uk
Fri Apr 19 16:10:42 CEST 2024
Device is: Not in smartctl database 7.3/5610
Bought from Amazon(uk) April 2022. Boot drive in my Linux server.
Thanks ... Paul
-------------- next part --------------
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.25-1-lts] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: V Series SATA SSD 120GB
Serial Number: 220910761802806
LU WWN Device Id: 5 02b2a2 01d1c1b1a
Add. Product Id: mavlsata
Firmware Version: V4.12
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: Not in smartctl database 7.3/5610
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Apr 17 17:11:28 2024 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x35) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours PO--CK 100 100 010 - 11953
12 Power_Cycle_Count PO--CK 100 100 010 - 741
161 Unknown_Attribute PO--CK 100 100 010 - 0
164 Unknown_Attribute PO--CK 100 100 010 - 28001
165 Unknown_Attribute PO--CK 100 100 010 - 47
166 Unknown_Attribute PO--CK 100 100 010 - 4
167 Unknown_Attribute PO--CK 100 100 010 - 43
169 Unknown_Attribute PO--CK 100 100 010 - 0
176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
177 Wear_Leveling_Count PO--CK 100 100 010 - 0
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
192 Power-Off_Retract_Count PO--CK 100 100 010 - 0
194 Temperature_Celsius PO--CK 100 100 010 - 44
195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0
199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0
241 Total_LBAs_Written PO--CK 100 100 010 - 1401
242 Total_LBAs_Read PO--CK 100 100 010 - 680
243 Unknown_Attribute PO--CK 100 100 010 - 0
244 Unknown_Attribute PO--CK 100 100 010 - 0
245 Unknown_Attribute PO--CK 100 100 010 - 0
246 Unknown_Attribute PO--CK 100 100 010 - 0
248 Unknown_Attribute PO--CK 100 100 010 - 0
249 Unknown_Attribute PO--CK 100 100 010 - 0
250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0
251 Unknown_Attribute PO--CK 100 100 010 - 0
252 Unknown_Attribute PO--CK 100 100 010 - 0
253 Unknown_Attribute PO--CK 100 100 010 - 0
254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported
More information about the Smartmontools-database
mailing list