[Smartmontools-database] Submit: smartctl-ADVANTECH-SQF-S25M8-128G-SAC.txt
Damien Dreimanis
damien at containerdepositsystems.com.au
Wed Mar 22 04:28:28 CET 2023
Attached
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20230322/775c04b4/attachment.htm>
-------------- next part --------------
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-55-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SQF-S25M8-128G-SAC
Firmware Version: SAFM02A5
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 22 13:56:46 2023 ACDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 1254
12 Power_Cycle_Count -O--C- 100 100 000 - 194
14 Unknown_Attribute -O--C- 100 100 000 - 268435456
15 Unknown_Attribute -O--C- 100 100 000 - 250069680
16 Unknown_Attribute -O--C- 100 100 000 - 87
17 Unknown_Attribute -O--C- 100 100 010 - 87
100 Unknown_Attribute -O--C- 100 100 000 - 2694320
168 Unknown_Attribute -O--C- 100 100 000 - 235
170 Unknown_Attribute PO---- 100 100 010 - 141
173 Unknown_Attribute -O--C- 100 100 000 - 5308574
174 Unknown_Attribute -O--C- 100 100 000 - 189
175 Program_Fail_Count_Chip PO--C- 100 100 050 - 12386560
192 Power-Off_Retract_Count -O--C- 100 100 000 - 189
194 Temperature_Celsius PO---K 090 048 027 - 37 (Min/Max 15/79)
202 Unknown_SSD_Attribute -O--C- 100 100 050 - 2
218 Unknown_Attribute PO-R-- 100 100 050 - 143
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 98
234 Unknown_Attribute PO-R-- 100 100 000 - 699183384
235 Unknown_Attribute PO-R-- 100 100 000 - 16374105632
241 Total_LBAs_Written -O--C- 100 100 000 - 368
242 Total_LBAs_Read -O--C- 100 100 000 - 723736877
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1253 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 194 --- Lifetime Power-On Resets
0x01 0x010 4 1254 --- Power-on Hours
0x01 0x018 6 772706249 --- Logical Sectors Written
0x01 0x020 6 14785289 --- Number of Write Commands
0x01 0x028 6 723736877 --- Logical Sectors Read
0x01 0x030 6 8181461 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 37 --- Current Temperature
0x05 0x010 1 64 --- Average Short Term Temperature
0x05 0x018 1 65 --- Average Long Term Temperature
0x05 0x020 1 79 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x030 1 72 --- Highest Average Short Term Temperature
0x05 0x038 1 36 --- Lowest Average Short Term Temperature
0x05 0x040 1 65 --- Highest Average Long Term Temperature
0x05 0x048 1 61 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 100 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 -40 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 762 --- Number of Hardware Resets
0x06 0x018 4 120 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 2 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list