[Smartmontools-database] SSD not in the database: smartmontools-report
serando
serando at sunrise.ch
Wed Nov 23 09:45:41 CET 2022
I have updated my database.
After, I had again a look at the attributes of this SSD.
Result: It's the same. Wrong attribute names for this SSD.
So it looks like the database was not updated according to this report?
Am 06.11.22 um 22:24 schrieb serando via Smartmontools-database:
> smartctl-Silicon_Power-Ace_A55_2.5_256GB_Serial_ATA_III_3D_TLC.txt
>
>
> smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.0-22-amd64] (local
> build)
> Copyright (C) 2002-19, Bruce Allen, Christian Franke,
> www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Device Model: SPCC Solid State Disk
> Serial Number: BAC707281E5300524580
> LU WWN Device Id: 0 000000 000000000
> Firmware Version: SBFMT1.3
> User Capacity: 256'060'514'304 bytes [256 GB]
> Sector Size: 512 bytes logical/physical
> Rotation Rate: Solid State Device
> Form Factor: 2.5 inches
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: ACS-4 (minor revision not indicated)
> SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
> Local Time is: Sun Nov 6 22:20:42 2022 CET
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> AAM feature is: Unavailable
> APM feature is: Unavailable
> Rd look-ahead is: Enabled
> Write cache is: Enabled
> DSN feature is: Unavailable
> ATA Security is: Disabled, NOT FROZEN [SEC1]
> Wt Cache Reorder: Unavailable
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x00) Offline data collection
> activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status: ( 0) The previous self-test
> routine completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (65535) seconds.
> Offline data collection
> capabilities: (0x79) SMART execute Offline immediate.
> No Auto Offline data collection support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before
> entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 30) minutes.
> Conveyance self-test routine
> recommended polling time: ( 6) minutes.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
> 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
> 9 Power_On_Hours -O--C- 100 100 000 - 16
> 12 Power_Cycle_Count -O--C- 100 100 000 - 19
> 168 Unknown_Attribute -O--C- 100 100 000 - 0
> 170 Unknown_Attribute PO---- 100 100 000 - 101
> 173 Unknown_Attribute -O--C- 100 100 000 - 1
> 192 Power-Off_Retract_Count -O--C- 100 100 000 - 7
> 194 Temperature_Celsius PO---K 067 067 000 - 33
> (Min/Max 33/33)
> 218 Unknown_Attribute PO-R-- 100 100 050 - 0
> 231 Unknown_SSD_Attribute PO--C- 100 100 000 - 100
> 241 Total_LBAs_Written -O--C- 100 100 000 - 50
> ||||||_ K auto-keep
> |||||__ C event count
> ||||___ R error rate
> |||____ S speed/performance
> ||_____ O updated online
> |______ P prefailure warning
>
> General Purpose Log Directory Version 1
> SMART Log Directory Version 1 [multi-sector log support]
> Address Access R/W Size Description
> 0x00 GPL,SL R/O 1 Log Directory
> 0x01 SL R/O 1 Summary SMART error log
> 0x02 SL R/O 51 Comprehensive SMART error log
> 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
> 0x04 GPL,SL R/O 8 Device Statistics log
> 0x06 SL R/O 1 SMART self-test log
> 0x07 GPL R/O 1 Extended self-test log
> 0x09 SL R/W 1 Selective self-test log
> 0x10 GPL R/O 1 NCQ Command Error log
> 0x11 GPL R/O 1 SATA Phy Event Counters log
> 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
> 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
>
> SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
> No Errors Logged
>
> SMART Extended Self-test Log Version: 1 (1 sectors)
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed without error 00% 16 -
>
> SMART Selective self-test log data structure revision number 0
> Note: revision number not 1 implies that no selective self-test has
> ever been run
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute
> delay.
>
> SCT Commands not supported
>
> Device Statistics (GP Log 0x04)
> Page Offset Size Value Flags Description
> 0x01 ===== = = === == General Statistics (rev 1) ==
> 0x01 0x008 4 19 --- Lifetime Power-On Resets
> 0x01 0x010 4 16 --- Power-on Hours
> 0x01 0x018 6 105618896 --- Logical Sectors Written
> 0x01 0x028 6 26589102 --- Logical Sectors Read
> 0x04 ===== = = === == General Errors Statistics (rev
> 1) ==
> 0x04 0x008 4 0 --- Number of Reported Uncorrectable
> Errors
> 0x05 ===== = = === == Temperature Statistics (rev 1) ==
> 0x05 0x008 1 33 --- Current Temperature
> 0x05 0x020 1 33 --- Highest Temperature
> 0x05 0x028 1 33 --- Lowest Temperature
> 0x06 ===== = = === == Transport Statistics (rev 1) ==
> 0x06 0x018 4 0 --- Number of Interface CRC Errors
> 0x07 ===== = = === == Solid State Device Statistics
> (rev 1) ==
> 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
> |||_ C monitored condition met
> ||__ D supports DSN
> |___ N normalized value
>
> Pending Defects log (GP Log 0x0c) not supported
>
> SATA Phy Event Counters (GP Log 0x11)
> ID Size Value Description
> 0x0001 2 0 Command failed due to ICRC error
> 0x0003 2 0 R_ERR response for device-to-host data FIS
> 0x0004 2 0 R_ERR response for host-to-device data FIS
> 0x0006 2 0 R_ERR response for device-to-host non-data FIS
> 0x0007 2 0 R_ERR response for host-to-device non-data FIS
> 0x0008 2 0 Device-to-host non-data FIS retries
> 0x0009 4 244 Transition from drive PhyRdy to drive PhyNRdy
> 0x000a 4 1 Device-to-host register FISes sent due to a
> COMRESET
> 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
> 0x0010 2 0 R_ERR response for host-to-device data FIS,
> non-CRC
> 0x0012 2 0 R_ERR response for host-to-device non-data
> FIS, CRC
> 0x0013 2 0 R_ERR response for host-to-device non-data
> FIS, non-CRC
>
>
> _______________________________________________
> Smartmontools-database mailing list
> Smartmontools-database at listi.jpberlin.de
> https://listi.jpberlin.de/mailman/listinfo/smartmontools-database
More information about the Smartmontools-database
mailing list