[Smartmontools-database] ATP 32GB 9-Pin eUSB Disk Module(AF32GSMGH-A01)

[George Mendoza]

 Can we please add this Disk or am I doing this wrong?  First time using a
mailing list.

Thanks
George

Website
https://www.atpinc.com/products/industrial-ssds-eusb

Product Flyer
https://www.atpinc.com/upload/download/2022/01-28/f2bcfea2.pdf


root at truenas[~]# usbconfig -d ugen2.4 dump_all_desc
ugen2.4: <ATP Electronics ATP CG eUSB> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (500mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0210
  bDeviceClass = 0x0000  <Probed by interface class>
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x090c
  idProduct = 0x3267
  bcdDevice = 0x1100
  iManufacturer = 0x0001  <ATP Electronics>
  iProduct = 0x0002  <ATP CG eUSB>
  iSerialNumber = 0x0003  <20010211-003418>
  bNumConfigurations = 0x0001

 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0020
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0080
    bMaxPower = 0x00fa

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0002
      bInterfaceClass = 0x0008  <Mass storage>
      bInterfaceSubClass = 0x0006
      bInterfaceProtocol = 0x0050
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 1
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0082  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000


**********************************************************************************
root at truenas[~]# smartctl -x /dev/da0
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RC6 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown USB bridge [0x090c:0x3267 (0x1100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

***********************************************************************************
root at truenas[~]# smartctl -d scsi -x /dev/da0
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RC6 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               ATP
Product:              ATP CG eUSB
Revision:             1100
Compliance:           SPC-4
User Capacity:        31,117,794,304 bytes [31.1 GB]
Logical block size:   512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Logical Unit id:      0x534d490033323830
Device type:          disk
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Local Time is:        Sun Jun 26 22:12:35 2022 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Device does not support Self Test logging
Device does not support Background scan results logging
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20220702/6e434b20/attachment.htm>