[Smartmontools-database] LITEON IT L8T-256L9G
Muazam Kamal
muazamkamal.dev at gmail.com
Sun Jul 19 19:44:41 CEST 2020
Hi,
Attached you will find the report.
*Cheers,*
*Muazam Kamal*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20200720/43a5b34d/attachment.html>
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-7634-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEON IT L8T-256L9G
Firmware Version: H883001
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 20 01:34:35 2020 AWST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 8612
12 Power_Cycle_Count PO---- 100 100 000 - 4347
170 Unknown_Attribute -O--CK 100 100 000 - 5
171 Unknown_Attribute PO---- 100 100 000 - 0
172 Unknown_Attribute PO---- 100 100 000 - 0
173 Unknown_Attribute PO---- 100 100 000 - 945051
174 Unknown_Attribute PO---- 100 100 000 - 1163
175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
177 Wear_Leveling_Count PO---- 100 100 000 - 945051
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 2
179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 5
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 608
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
183 Runtime_Bad_Block -O--CK 100 100 000 - 70
184 End-to-End_Error PO--CK 096 096 000 - 4
187 Reported_Uncorrect PO---- 100 100 000 - 5
188 Command_Timeout -O--CK 100 100 000 - 293
192 Power-Off_Retract_Count PO---- 100 100 000 - 1163
195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
196 Reallocated_Event_Count PO---- 100 100 000 - 5
198 Offline_Uncorrectable PO---- 100 100 000 - 0
199 UDMA_CRC_Error_Count PO---- 100 100 000 - 1942
232 Available_Reservd_Space PO---- 097 097 010 - 0
233 Media_Wearout_Indicator PO---- 100 100 000 - 59065
241 Total_LBAs_Written PO---- 100 100 000 - 1633113
242 Total_LBAs_Read PO---- 100 100 000 - 1991579
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 0
SMART Log Directory Version 0
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 2 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 1 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
27 10 80 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 27 80 00 00 00 00 57 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 27 80 00 00 00 00 55 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 27 80 00 00 00 00 53 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 27 80 00 00 00 00 51 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
00 00 00 00 00 00 00 17 00:00:00.000 NOP [Abort queued commands]
Error -1 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 00 10 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 00 00 00 80 7d+15:11:28.768 NOP [Abort queued commands]
00 00 00 00 00 00 00 80 7d+15:09:17.696 NOP [Abort queued commands]
00 00 00 00 00 00 00 80 7d+15:07:06.624 NOP [Abort queued commands]
00 00 00 00 00 00 00 80 7d+15:04:55.552 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 7d+15:02:44.480 NOP [Abort queued commands]
Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 27 00 00 00 00 45
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
27 00 00 00 00 00 43 00 00:00:00.128 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 41 00 00:00:00.128 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 3f 00 00:00:00.128 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 00 00 00 3d 00 00:00:00.128 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
00 00 00 00 00 03 17 00 00:00:00.000 NOP [Abort queued commands]
Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 3b 27 80
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 39 27 80 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 37 27 80 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 35 27 80 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 33 27 80 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 03 00 00 00 00 00:00:00.000 NOP [Abort queued commands]
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 30 27 80 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 2e 27 80 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 2c 27 80 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 2a 27 80 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 84 16 00 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 03 17 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8612 -
Selective Self-tests/Logging not supported
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (0)
Index Estimated Time Temperature Celsius
1 2020-07-19 23:27 ? -
... ..(126 skipped). .. -
0 2020-07-20 01:34 ? -
SCT Error Recovery Control:
Read: 2 (0.2 seconds)
Write: 2 (0.2 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list