[Smartmontools-database] HGST ULTRASTAR
Radomír Palovský
radomir.palovsky at gmail.com
Sat May 25 21:27:23 CEST 2019
Hi,
sending HGST Ultrastar 3TB disk
Radomír
-------------- next part --------------
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.12.14-lp150.12.61-default] (SUSE RPM)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HUS724030ALA640
Serial Number: P9KAN8SY
Firmware Version: MF8OAAZ0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat May 25 21:01:55 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 432) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 137 137 054 - 78
3 Spin_Up_Time POS--- 121 121 024 - 512 (Average 514)
4 Start_Stop_Count -O--C- 100 100 000 - 47
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 140 140 020 - 26
9 Power_On_Hours -O--C- 099 099 000 - 10089
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 47
192 Power-Off_Retract_Count -O--CK 100 100 000 - 455
193 Load_Cycle_Count -O--C- 100 100 000 - 455
194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 20/44)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 10071 -
# 2 Short offline Completed without error 00% 10047 -
# 3 Short offline Completed without error 00% 10023 -
# 4 Short offline Completed without error 00% 9999 -
# 5 Short offline Completed without error 00% 9975 -
# 6 Short offline Completed without error 00% 9951 -
# 7 Short offline Completed without error 00% 9927 -
# 8 Short offline Completed without error 00% 9903 -
# 9 Short offline Completed without error 00% 9879 -
#10 Short offline Completed without error 00% 9854 -
#11 Short offline Completed without error 00% 9830 -
#12 Short offline Completed without error 00% 9806 -
#13 Short offline Completed without error 00% 9782 -
#14 Short offline Completed without error 00% 9758 -
#15 Short offline Completed without error 00% 9734 -
#16 Short offline Completed without error 00% 9710 -
#17 Short offline Completed without error 00% 9686 -
#18 Short offline Completed without error 00% 9662 -
#19 Short offline Completed without error 00% 9638 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 23/39 Celsius
Lifetime Min/Max Temperature: 20/44 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (50)
Index Estimated Time Temperature Celsius
51 2019-05-25 18:54 36 *****************
... ..( 2 skipped). .. *****************
54 2019-05-25 18:57 36 *****************
55 2019-05-25 18:58 37 ******************
56 2019-05-25 18:59 36 *****************
... ..( 7 skipped). .. *****************
64 2019-05-25 19:07 36 *****************
65 2019-05-25 19:08 37 ******************
66 2019-05-25 19:09 36 *****************
67 2019-05-25 19:10 36 *****************
68 2019-05-25 19:11 37 ******************
... ..( 2 skipped). .. ******************
71 2019-05-25 19:14 37 ******************
72 2019-05-25 19:15 36 *****************
73 2019-05-25 19:16 36 *****************
74 2019-05-25 19:17 36 *****************
75 2019-05-25 19:18 37 ******************
76 2019-05-25 19:19 37 ******************
77 2019-05-25 19:20 36 *****************
78 2019-05-25 19:21 36 *****************
79 2019-05-25 19:22 36 *****************
80 2019-05-25 19:23 37 ******************
81 2019-05-25 19:24 36 *****************
... ..( 2 skipped). .. *****************
84 2019-05-25 19:27 36 *****************
85 2019-05-25 19:28 37 ******************
86 2019-05-25 19:29 36 *****************
... ..( 2 skipped). .. *****************
89 2019-05-25 19:32 36 *****************
90 2019-05-25 19:33 37 ******************
91 2019-05-25 19:34 36 *****************
... ..( 5 skipped). .. *****************
97 2019-05-25 19:40 36 *****************
98 2019-05-25 19:41 37 ******************
... ..( 8 skipped). .. ******************
107 2019-05-25 19:50 37 ******************
108 2019-05-25 19:51 36 *****************
109 2019-05-25 19:52 37 ******************
110 2019-05-25 19:53 37 ******************
111 2019-05-25 19:54 37 ******************
112 2019-05-25 19:55 36 *****************
113 2019-05-25 19:56 36 *****************
114 2019-05-25 19:57 37 ******************
115 2019-05-25 19:58 37 ******************
116 2019-05-25 19:59 37 ******************
117 2019-05-25 20:00 36 *****************
118 2019-05-25 20:01 36 *****************
119 2019-05-25 20:02 36 *****************
120 2019-05-25 20:03 37 ******************
121 2019-05-25 20:04 37 ******************
122 2019-05-25 20:05 36 *****************
123 2019-05-25 20:06 36 *****************
124 2019-05-25 20:07 37 ******************
125 2019-05-25 20:08 37 ******************
126 2019-05-25 20:09 36 *****************
127 2019-05-25 20:10 36 *****************
0 2019-05-25 20:11 37 ******************
... ..( 2 skipped). .. ******************
3 2019-05-25 20:14 37 ******************
4 2019-05-25 20:15 36 *****************
5 2019-05-25 20:16 36 *****************
6 2019-05-25 20:17 37 ******************
7 2019-05-25 20:18 37 ******************
8 2019-05-25 20:19 36 *****************
... ..( 2 skipped). .. *****************
11 2019-05-25 20:22 36 *****************
12 2019-05-25 20:23 37 ******************
13 2019-05-25 20:24 36 *****************
... ..( 2 skipped). .. *****************
16 2019-05-25 20:27 36 *****************
17 2019-05-25 20:28 37 ******************
18 2019-05-25 20:29 36 *****************
... ..( 31 skipped). .. *****************
50 2019-05-25 21:01 36 *****************
SCT Error Recovery Control:
Read: 140 (14.0 seconds)
Write: 140 (14.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 47 --- Lifetime Power-On Resets
0x01 0x018 6 18719781286 --- Logical Sectors Written
0x01 0x020 6 95992098 --- Number of Write Commands
0x01 0x028 6 277748371831 --- Logical Sectors Read
0x01 0x030 6 688924605 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 10086 --- Spindle Motor Power-on Hours
0x03 0x010 4 10086 --- Head Flying Hours
0x03 0x018 4 455 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 36 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 34 N-- Average Long Term Temperature
0x05 0x020 1 44 --- Highest Temperature
0x05 0x028 1 20 --- Lowest Temperature
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 37 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2476 --- Number of Hardware Resets
0x06 0x010 4 432 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 98 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 98 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list