[Smartmontools-database] Device Model: HUA723020ALA640
Alistair Wilson
AlistairWilson at stofanet.dk
Thu May 23 15:55:19 CEST 2019
https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/product/data-center-drives/ultrastar-sata-series/data-sheet-ultrastar-7k3000.pdf
This specific drive is not showing up in database as per Smart output:
Device Model - HUA723020ALA640
Thanks
Alistair
-------------- next part --------------
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HUA723020ALA640
Serial Number: YFKSAHWG
Firmware Version: MK7OAAA0
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Thu May 23 15:27:07 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18950) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 316) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 134 134 054 - 89
3 Spin_Up_Time POS--- 127 127 024 - 491 (Average 492)
4 Start_Stop_Count -O--C- 100 100 000 - 125
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 123 123 020 - 31
9 Power_On_Hours -O--C- 096 096 000 - 30017
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 124
192 Power-Off_Retract_Count -O--CK 100 100 000 - 224
193 Load_Cycle_Count -O--C- 100 100 000 - 224
194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 21/47)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 63 Current Device Internal Status Data log
0x80 GPL R/W 63 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 29870 hours (1244 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 5d 00 00 00 d9 29 4b 00 00 Error: ICRC, ABRT at LBA = 0x00d9294b = 14231883
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 03 ff 00 00 00 00 00 d9 25 a9 40 00 00:21:14.112 WRITE FPDMA QUEUED
61 03 ff 00 00 00 00 00 d9 21 aa 40 00 00:21:14.108 WRITE FPDMA QUEUED
61 03 ff 00 00 00 00 00 d9 1d ab 40 00 00:21:14.104 WRITE FPDMA QUEUED
61 03 ff 00 00 00 00 00 d9 19 ac 40 00 00:21:14.101 WRITE FPDMA QUEUED
61 03 ff 00 00 00 00 00 d9 15 ad 40 00 00:21:14.097 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 30017 -
# 2 Extended offline Completed without error 00% 29999 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 27/34 Celsius
Lifetime Min/Max Temperature: 21/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (48)
Index Estimated Time Temperature Celsius
49 2019-05-23 13:20 34 ***************
50 2019-05-23 13:21 34 ***************
51 2019-05-23 13:22 33 **************
... ..( 6 skipped). .. **************
58 2019-05-23 13:29 33 **************
59 2019-05-23 13:30 34 ***************
... ..( 3 skipped). .. ***************
63 2019-05-23 13:34 34 ***************
64 2019-05-23 13:35 33 **************
... ..( 7 skipped). .. **************
72 2019-05-23 13:43 33 **************
73 2019-05-23 13:44 34 ***************
74 2019-05-23 13:45 33 **************
... ..( 3 skipped). .. **************
78 2019-05-23 13:49 33 **************
79 2019-05-23 13:50 ? -
80 2019-05-23 13:51 31 ************
81 2019-05-23 13:52 31 ************
82 2019-05-23 13:53 32 *************
... ..( 9 skipped). .. *************
92 2019-05-23 14:03 32 *************
93 2019-05-23 14:04 33 **************
94 2019-05-23 14:05 32 *************
95 2019-05-23 14:06 33 **************
... ..( 9 skipped). .. **************
105 2019-05-23 14:16 33 **************
106 2019-05-23 14:17 ? -
107 2019-05-23 14:18 30 ***********
108 2019-05-23 14:19 30 ***********
109 2019-05-23 14:20 31 ************
... ..( 4 skipped). .. ************
114 2019-05-23 14:25 31 ************
115 2019-05-23 14:26 32 *************
... ..( 5 skipped). .. *************
121 2019-05-23 14:32 32 *************
122 2019-05-23 14:33 ? -
123 2019-05-23 14:34 ? -
124 2019-05-23 14:35 27 ********
125 2019-05-23 14:36 28 *********
126 2019-05-23 14:37 28 *********
127 2019-05-23 14:38 29 **********
... ..( 2 skipped). .. **********
2 2019-05-23 14:41 29 **********
3 2019-05-23 14:42 30 ***********
4 2019-05-23 14:43 30 ***********
5 2019-05-23 14:44 30 ***********
6 2019-05-23 14:45 31 ************
... ..( 3 skipped). .. ************
10 2019-05-23 14:49 31 ************
11 2019-05-23 14:50 32 *************
... ..( 7 skipped). .. *************
19 2019-05-23 14:58 32 *************
20 2019-05-23 14:59 33 **************
... ..( 5 skipped). .. **************
26 2019-05-23 15:05 33 **************
27 2019-05-23 15:06 34 ***************
28 2019-05-23 15:07 33 **************
... ..( 3 skipped). .. **************
32 2019-05-23 15:11 33 **************
33 2019-05-23 15:12 34 ***************
... ..( 14 skipped). .. ***************
48 2019-05-23 15:27 34 ***************
SCT Error Recovery Control:
Read: 140 (14.0 seconds)
Write: 140 (14.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 124 --- Lifetime Power-On Resets
0x01 0x010 4 30017 --- Power-on Hours
0x01 0x018 6 223005734345 --- Logical Sectors Written
0x01 0x020 6 1821984989 --- Number of Write Commands
0x01 0x028 6 1037672941575 --- Logical Sectors Read
0x01 0x030 6 6142558541 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 30006 --- Spindle Motor Power-on Hours
0x03 0x010 4 30006 --- Head Flying Hours
0x03 0x018 4 224 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 1 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 34 N-- Average Short Term Temperature
0x05 0x018 1 35 N-- Average Long Term Temperature
0x05 0x020 1 47 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 37 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 676413 --- Number of Hardware Resets
0x06 0x010 4 270 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list