[Postfixbuch-users] Anvil laeuft nicht

[Andreas Haase]

Hallo,

ich habe hier ein Debian Lenny mit einem Postfix 2.5.5 laufen. Leider 
loggt der Server keine Statistik-Daten, sehr wohl aber, wenn er Mails 
annimmt und verarbeitet. Ich habe damit leider keine Grundlage fuer die 
Entscheidung, ob Rate-Limits sinnvoll sind oder nicht.

Problem scheint zu sein, dass anvil nicht gestartet wird, wenn ich den 
Postfix ueber Init-Skript anschiebe. Und ich vermute, dadurch wuerden 
eingetragene Limits in der main.cf sowieso nicht greifen.

--- postconf -n ---
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
biff = no
bounce_queue_lifetime = 2h
config_directory = /etc/postfix
delay_warning_time = 4h
disable_vrfy_command = yes
fast_flush_domains =
inet_interfaces = all
mailbox_size_limit = 0
maximal_queue_lifetime = 5h
message_size_limit = 51200000
mydestination = $myhostname, localhost.$mydomain, localhost.localdomain, 
localhost
mydomain = privacy.local
myhostname = srv.$mydomain
mynetworks = 127.0.0.0/8 192.168.11.0/24 192.168.12.0/24 
myorigin = /etc/mailname
queue_run_delay = 300
readme_directory = no
recipient_delimiter = +
sender_canonical_maps = hash:/etc/postfix/sender_canonical
smtp_connect_timeout = 10s
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtpd_banner = srv.privacy.local ESMTP
smtpd_client_message_rate_limit = 200
smtpd_data_restrictions = reject_multi_recipient_bounce
smtpd_helo_required = yes
smtpd_recipient_restrictions = permit_mynetworks,       reject
smtpd_soft_error_limit = 3
smtpd_timeout = 60
smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtpd_use_tls = no
--- postconf -n ---

--- master.cf ---
smtp      inet  n       -       -       -       -       smtpd
pickup    fifo  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp
relay     unix  -       -       -       -       -       smtp
         -o smtp_fallback_relay=
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
maildrop  unix  -       n       n       -       -       pipe
   flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
uucp      unix  -       n       n       -       -       pipe
   flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail 
($recipient)
ifmail    unix  -       n       n       -       -       pipe
   flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
   flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender 
$recipient
scalemail-backend unix  -       n       n       -       2       pipe
   flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store 
${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
   flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
   ${nexthop} ${user}
--- master.cf ---

Hat jemand einen Tip, wie ich anvil zum Starten und Arbeiten ueberreden 
koennte?

Danke und tschau,
Andreas