[Postfixbuch-users] Maildir führt zu Fehler
lars behrens
lars at brainlift.de
Di Jan 10 16:21:53 CET 2006
hallo, liste,
auf debian sarge mit postfix 2.2.4 habe ich folgendes problem: wenn ich
home_mailbox = Maildir/
eintrage und den postfix reloade, kommt folgende Fehlermeldung:
Jan 10 16:09:29 webmail postfix/local[8602]: fatal: gethostbyname:
Success
Jan 10 16:09:30 webmail postfix/qmgr[8594]: warning: premature
end-of-input on private/local socket while reading input attribute name
Jan 10 16:09:30 webmail postfix/qmgr[8594]: warning: private/local
socket: malformed response
Jan 10 16:09:30 webmail postfix/qmgr[8594]: warning: transport local
failure -- see a previous warning/fatal/panic logfile record for the
problem description
Jan 10 16:09:30 webmail postfix/master[8212]: warning: process
/usr/lib/postfix/local pid 8602 exit status 1
Jan 10 16:09:30 webmail postfix/master[8212]: warning:
/usr/lib/postfix/local: bad command startup -- throttling
wenn ich den parameter auskommentiere (also auf default mailbox setze),
geht alles wieder - nur, dass die Mails in mailbox gespeichert werden
und nicht in Maildir/.
ich hatte die konfigs von meinem bisherigen postfix übernommen (selbst
kompiliertes postfix 2.3 auf debian sarge); ich finde in den main.cfs
nichts, was dieses Fehlverhalten verursacht haben könnte.
hier ist die diff aus der alten und der neuen postfix-konfig:
41c41
< body_checks = regexp:/etc/postfix/body_checks
---
> body_checks =
47c47
< broken_sasl_auth_clients = yes
---
> broken_sasl_auth_clients = no
59,60c59,60
< content_filter = smtp-amavis:[127.0.0.1]:10024
< daemon_directory = /usr/libexec/postfix
---
> content_filter =
> daemon_directory = /usr/lib/postfix
114c114
< header_checks = regexp:/etc/postfix/header_checks
---
> header_checks =
117c117
< home_mailbox = Maildir/
---
> home_mailbox =
119c119
< html_directory = /home/adminz/dokus/postfix-html/
---
> html_directory = no
159c159
< mail_release_date = 20050314
---
> mail_release_date = 20050621
161c161
< mail_version = 2.3-20050314
---
> mail_version = 2.2.4
168c168
< manpage_directory = /usr/local/man
---
> manpage_directory = /usr/share/man
184c184
< mydestination = $mydomain, tbm.$mydomain, tbk.$mydomain,
proxie.$mydomain, postfix.$mydomain, xmail.$mydomain,
$myhostname, localhost.$mydomain, mail.$mydomain
---
> mydestination = $mydomain, tbm.$mydomain, tbk.$mydomain,
> proxie.$mydomain, postfix.$mydomain, xmail.$mydomain,
> $myhostname, localhost.$mydomain, mail.$mydomain
> mailx.$mydomain
217c217
< readme_directory = /home/adminz/dokus/postfix-readme
---
> readme_directory = /usr/share/doc/postfix
238c238
< sample_directory = /etc/postfix
---
> sample_directory = /usr/share/doc/postfix/examples
269c269
< smtp_line_length_limit = 990
---
> smtp_line_length_limit = 0
341c341
< smtpd_recipient_restrictions = permit_sasl_authenticated,
permit_mynetworks, check_client_access hash:/etc/postfix/ip_block
check_sender_access hash:/etc/postfix/sender_access
check_recipient_access hash:/etc/postfix/recipient_access
reject_non_fqdn_sender, reject_unauth_destination,
check_policy_service inet:127.0.0.1:60000 permit
---
> smtpd_recipient_restrictions = permit_mynetworks,
> check_client_access hash:/etc/postfix/ip_block check_sender_access
> hash:/etc/postfix/sender_access check_recipient_access
> hash:/etc/postfix/recipient_access reject_non_fqdn_sender,
> reject_unauth_destination, permit
346c346
< smtpd_sasl_auth_enable = yes
---
> smtpd_sasl_auth_enable = no
und hier die master.cf des neuen postfix:
#
========================================================================
==
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
#
========================================================================
==
smtp inet n - - - - smtpd
#submission inet n - - - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps inet n - - - - smtpd
# -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - - - - smtpd
# -o smtpd_etrn_restrictions=reject
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - - 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX
loops
relay unix - - - - - smtp
-o fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail
($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender
$recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store
${nexthop} ${user} ${extension}
mailman unix - - n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
jemand eine idee dazu...?!
danke und gruss
lars behrens
Mehr Informationen über die Mailingliste Postfixbuch-users