<div dir="ltr">Saw this message when trying to check out the progress of a DST I tried to kick off. I think one of the read heads on this drive is bad. Host is running Rocky Linux 8.10.<div><br></div><div><br></div><div>$ smartctl -a /dev/sdb<br>smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.18.0-553.22.1.el8_10.x86_64] (local build)<br>Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org">www.smartmontools.org</a><br><br>=== START OF INFORMATION SECTION ===<br>Vendor:               SEAGATE<br>Product:              ST10000NM018B<br>Revision:             E004<br>Compliance:           SPC-5<br>User Capacity:        10,000,831,348,736 bytes [10.0 TB]<br>Logical block size:   512 bytes<br>Physical block size:  4096 bytes<br>LU is fully provisioned<br>Rotation Rate:        7200 rpm<br>Form Factor:          3.5 inches<br>Logical Unit id:      0x5000c500xxxxxxxx<br>Serial number:        xxxxxxxx<br>Device type:          disk<br>Transport protocol:   SAS (SPL-3)<br>Local Time is:        Tue Oct  1 14:35:50 2024 MDT<br>SMART support is:     Available - device has SMART capability.<br>SMART support is:     Enabled<br>Temperature Warning:  Enabled<br><br>=== START OF READ SMART DATA SECTION ===<br>SMART Health Status: OK<br><br>Grown defects during certification <not available><br>Total blocks reassigned during format <not available><br>Total new blocks reassigned <not available><br>Power on minutes since format <not available><br>Current Drive Temperature:     31 C<br>Drive Trip Temperature:        60 C<br><br>Accumulated power on time, hours:minutes 7985:26<br>Manufactured in week 49 of year 2020<br>Specified cycle count over device lifetime:  50000<br>Accumulated start-stop cycles:  238<br>Specified load-unload count over device lifetime:  600000<br>Accumulated load-unload cycles:  10841<br>Elements in grown defect list: 2<br><br>Vendor (Seagate Cache) information<br>  Blocks sent to initiator = 12840<br>  Blocks received from initiator = 1024008<br>  Blocks read from cache and sent to initiator = 1168<br>  Number of read and write commands whose size <= segment size = 53<br>  Number of read and write commands whose size > segment size = 1<br><br>Vendor (Seagate/Hitachi) factory information<br>  number of hours powered up = 7985.43<br>  number of minutes until next internal SMART test = 56<br><br>Error counter log:<br>           Errors Corrected by           Total   Correction     Gigabytes    Total<br>               ECC          rereads/    errors   algorithm      processed    uncorrected<br>           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors<br>read:          0        0         0         0         45          0.007          45<br>write:         0        0         0         0          0          0.524           0<br><br>Non-medium error count:        0<br><br>  Pending defect count:592 Pending Defects: index, LBA and accumulated_power_on_hours follow<br>     1:  0x6e87b00         ,   7985<br>Smartctl: Exception: json.cpp(39): Assertion failed: 'a' <= c && c <= 'z'<br>Please inform <a href="mailto:smartmontools-support@listi.jpberlin.de">smartmontools-support@listi.jpberlin.de</a>, including output of smartctl -V.<br><br><br><br>$ smartctl -V<br>smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.18.0-553.22.1.el8_10.x86_64] (local build)<br>Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org">www.smartmontools.org</a><br><br>smartctl comes with ABSOLUTELY NO WARRANTY. This is free<br>software, and you are welcome to redistribute it under<br>the terms of the GNU General Public License; either<br>version 2, or (at your option) any later version.<br>See <a href="http://www.gnu.org">http://www.gnu.org</a> for further details.<br><br>smartmontools release 7.1 dated 2019-12-30 at 15:00:11 UTC<br>smartmontools SVN rev 5022 dated 2019-12-30 at 15:00:49<br>smartmontools build host: x86_64-redhat-linux-gnu<br>smartmontools build with: C++14, GCC 8.5.0 20210514 (Red Hat 8.5.0-21)<br>smartmontools configure arguments: '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--program-prefix=' '--disable-dependency-tracking' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--with-selinux' '--with-libcap-ng=yes' '--with-libsystemd' '--with-systemdsystemunitdir=/usr/lib/systemd/system' '--sysconfdir=/etc/smartmontools/' '--with-systemdenvfile=/etc/sysconfig/smartmontools' 'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu' 'CXXFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' 'LDFLAGS=-Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' 'CFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig'<br><br></div></div>