<div dir="ltr"><span style="font-family:monospace">Hello,<br><br>I have bought a M2.SATA (not NMVE) USB3 External Case as well as a M2.SATA disk:<br><br>- The case is from Wanfocyu but the USB is recognized as "Intrinsix Corp." by lsusb. (ASIN B07TJQ4FJF)<br>- The disk is a Western Digital - WD Blue SSD - SSD interne 1To M.2 SATA 3D NAND (ASIN B073SB2MXT)<br><br>smartctl (7.1) fails to recognize the USB bridge, and thus the disk:<br><br>    $ smartctl --info '/dev/disk/by-id/usb-WDC_WDS_100T2B0B-00YS70_DD5641988387387397-0:0'<br>    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.97-gentoo-x86_64] (local build)<br>    Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org">www.smartmontools.org</a><br>    /dev/disk/by-id/usb-WDC_WDS_100T2B0B-00YS70_DD5641988387387397-0:0: Unknown USB bridge [0x0578:0x0578 (0x202)]<br><br>Whilst lsusb understand it as being from Intrinsix:<br><br>    $ lsusb<br>    Bus 004 Device 002: ID 0578:0578 Intrinsix Corp.<br><br>On Windows (terminal is git bash, cmd.exe does not change anything to the output), the same disk was seen as scsi using smartctl --scan:<br><br>  $ /e/apps/portable/smartmontools/bin/smartctl.exe --scan<br>  /dev/sdg -d scsi # /dev/sdg, SCSI device<br>  $ /e/apps/portable/smartmontools/bin/smartctl.exe --scan-open<br>  # /dev/sdg -d scsi # /dev/sdg, SCSI device open failed: \\.\PhysicalDrive6: Open failed, Error=5<br><br>Thus, on Linux, I tried to pass -d scsi, and -d sat (the result are below): <br><br>- With scsi SMART attributes are not recognized.<br>- With  sat  it  work better, but I presume it might not be good on all attributes ("SMART Status not supported: Incomplete response, ATA output registers missing")<br><br></span><div><span style="font-family:monospace">Should I issue a database entry ? <br></span></div><div><span style="font-family:monospace"><br></span></div><div><span style="font-family:monospace">Regards,</span></div><div><span style="font-family:monospace">Baldurien<br></span></div><div><br></div><div><br></div><div><span style="font-family:monospace"></span></div><div><span style="font-family:monospace"></span></div><span style="font-family:monospace"><br>------ The command and their result ------<br><br>    $ smartctl -d scsi -a /dev/disk/by-id/usb-WDC_WDS_100T2B0B-00YS70_DD5641988387387397-0:0<br>    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.97-gentoo-x86_64] (local build)<br>    Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org">www.smartmontools.org</a><br>    <br>    === START OF INFORMATION SECTION ===<br>    Vendor:               WDC  WDS<br>    Product:              100T2B0B-00YS70<br>    Revision:             0202<br>    Compliance:           SPC-4<br>    User Capacity:        1,000,204,886,016 bytes [1.00 TB]<br>    Logical block size:   512 bytes<br>    Physical block size:  4096 bytes<br>    LU is fully provisioned<br>    Logical Unit id:      0x3044564198838738<br>    Serial number:        **************<br>    Device type:          disk<br>    Local Time is:        Tue Mar 17 23:27:58 2020 CET<br>    SMART support is:     Unavailable - device lacks SMART capability.<br>    <br>    === START OF READ SMART DATA SECTION ===<br>    Current Drive Temperature:     0 C<br>    Drive Trip Temperature:        0 C<br>    <br>    Error Counter logging not supported<br>    <br>    No Self-tests have been logged<br><br>    $ smartctl -d sat -a /dev/disk/by-id/usb-WDC_WDS_100T2B0B-00YS70_DD5641988387387397-0:0<br>    smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.97-gentoo-x86_64] (local build)<br>    Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org">www.smartmontools.org</a><br>    <br>    === START OF INFORMATION SECTION ===<br>    Model Family:     WD Blue and Green SSDs<br>    Device Model:     WDC  WDS100T2B0B-00YS70<br>    Serial Number:    **************<br>    LU WWN Device Id: 5 001b44 4a837ccbb<br>    Firmware Version: 401020WD<br>    User Capacity:    1,000,204,886,016 bytes [1.00 TB]<br>    Sector Size:      512 bytes logical/physical<br>    Rotation Rate:    Solid State Device<br>    Form Factor:      M.2<br>    Device is:        In smartctl database [for details use: -P show]<br>    ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5<br>    SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)<br>    Local Time is:    Tue Mar 17 23:29:31 2020 CET<br>    SMART support is: Available - device has SMART capability.<br>    SMART support is: Enabled<br>    <br>    === START OF READ SMART DATA SECTION ===<br>    SMART Status not supported: Incomplete response, ATA output registers missing<br>    SMART overall-health self-assessment test result: PASSED<br>    Warning: This result is based on an Attribute check.<br>    <br>    General SMART Values:<br>    Offline data collection status:  (0x00) Offline data collection activity<br>                                            was never started.<br>                                            Auto Offline Data Collection: Disabled.<br>    Self-test execution status:      (   0) The previous self-test routine completed<br>                                            without error or no self-test has ever<br>                                            been run.<br>    Total time to complete Offline<br>    data collection:                (    0) seconds.<br>    Offline data collection<br>    capabilities:                    (0x11) SMART execute Offline immediate.<br>                                            No Auto Offline data collection support.<br>                                            Suspend Offline collection upon new<br>                                            command.<br>                                            No Offline surface scan supported.<br>                                            Self-test supported.<br>                                            No Conveyance Self-test supported.<br>                                            No Selective Self-test supported.<br>    SMART capabilities:            (0x0003) Saves SMART data before entering<br>                                            power-saving mode.<br>                                            Supports SMART auto save timer.<br>    Error logging capability:        (0x01) Error logging supported.<br>                                            General Purpose Logging supported.<br>    Short self-test routine<br>    recommended polling time:        (   2) minutes.<br>    Extended self-test routine<br>    recommended polling time:        (  10) minutes.<br>    <br>    SMART Attributes Data Structure revision number: 4<br>    Vendor Specific SMART Attributes with Thresholds:<br>    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE<br>      5 Reallocated_Sector_Ct   0x0032   100   100   ---    Old_age   Always       -       0<br>      9 Power_On_Hours          0x0032   100   100   ---    Old_age   Always       -       104<br>     12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       35<br>    165 Block_Erase_Count       0x0032   100   100   ---    Old_age   Always       -       1835024<br>    166 Minimum_PE_Cycles_TLC   0x0032   100   100   ---    Old_age   Always       -       0<br>    167 Max_Bad_Blocks_per_Die  0x0032   100   100   ---    Old_age   Always       -       37<br>    168 Maximum_PE_Cycles_TLC   0x0032   100   100   ---    Old_age   Always       -       1<br>    169 Total_Bad_Blocks        0x0032   100   100   ---    Old_age   Always       -       528<br>    170 Grown_Bad_Blocks        0x0032   100   100   ---    Old_age   Always       -       0<br>    171 Program_Fail_Count      0x0032   100   100   ---    Old_age   Always       -       0<br>    172 Erase_Fail_Count        0x0032   100   100   ---    Old_age   Always       -       0<br>    173 Average_PE_Cycles_TLC   0x0032   100   100   ---    Old_age   Always       -       0<br>    174 Unexpected_Power_Loss   0x0032   100   100   ---    Old_age   Always       -       12<br>    184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0<br>    187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       0<br>    188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       32<br>    194 Temperature_Celsius     0x0022   069   047   ---    Old_age   Always       -       31 (Min/Max 22/47)<br>    199 UDMA_CRC_Error_Count    0x0032   100   100   ---    Old_age   Always       -       0<br>    230 Media_Wearout_Indicator 0x0032   001   001   ---    Old_age   Always       -       0x000300000003<br>    232 Available_Reservd_Space 0x0033   100   100   004    Pre-fail  Always       -       100<br>    233 NAND_GB_Written_TLC     0x0032   100   100   ---    Old_age   Always       -       352<br>    234 NAND_GB_Written_SLC     0x0032   100   100   ---    Old_age   Always       -       401<br>    241 Host_Writes_GiB         0x0030   253   253   ---    Old_age   Offline      -       399<br>    242 Host_Reads_GiB          0x0030   253   253   ---    Old_age   Offline      -       2762<br>    244 Temp_Throttle_Status    0x0032   000   100   ---    Old_age   Always       -       0<br>    <br>    SMART Error Log Version: 1<br>    No Errors Logged<br>    <br>    SMART Self-test log structure revision number 1<br>    No self-tests have been logged.  [To run self-tests, use: smartctl -t]<br>    <br>    Selective Self-tests/Logging not supported<br><br><br><br></span></div>