<div dir="auto"><div>Thx!<div dir="auto"><br></div><div dir="auto">The only thing I currently see are the udma crc errors count, which would prove your idea that it could be a connection issue.</div><div dir="auto"><br></div><div dir="auto"><span style="color:rgb(34,34,34);font-family:-apple-system,blinkmacsystemfont,"segoe ui",roboto,lato,helvetica,arial,sans-serif;font-size:16px;background-color:rgb(255,255,255)">The count of errors in data transfer via the interface cable as determined by ICRC (Interface Cyclic Redundancy Check).</span><br></div><div dir="auto"><br></div>Did you already try another sata cable or sata connector/slot?<br><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, 20 Mar 2020, 19:37 Alex <<a href="mailto:mysqlstudent@gmail.com" target="_blank" rel="noreferrer">mysqlstudent@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On Fri, Mar 20, 2020 at 12:23 PM Claudio Kuenzler <<a href="mailto:napsty@gmail.com" rel="noreferrer noreferrer" target="_blank">napsty@gmail.com</a>> wrote:<br>
><br>
> Run<br>
><br>
> smartctl -a /dev/sdd<br>
><br>
> And show the output here<br>
<br>
Ah, thanks, I meant to do that initially. I also just ran a short test<br>
and it appears to have passed successfully.<br>
<br>
# smartctl --all /dev/sdd<br>
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.12-200.fc30.x86_64]<br>
(local build)<br>
Copyright (C) 2002-19, Bruce Allen, Christian Franke, <a href="http://www.smartmontools.org" rel="noreferrer noreferrer noreferrer" target="_blank">www.smartmontools.org</a><br>
<br>
=== START OF INFORMATION SECTION ===<br>
Model Family: Western Digital Red<br>
Device Model: WDC WD30EFRX-68N32N0<br>
Serial Number: WD-WCCXXXXXX<br>
LU WWN Device Id: 5 0014ee 20f3b0dee<br>
Firmware Version: 82.00A82<br>
User Capacity: 3,000,592,982,016 bytes [3.00 TB]<br>
Sector Sizes: 512 bytes logical, 4096 bytes physical<br>
Rotation Rate: 5400 rpm<br>
Form Factor: 3.5 inches<br>
Device is: In smartctl database [for details use: -P show]<br>
ATA Version is: ACS-3 T13/2161-D revision 5<br>
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)<br>
Local Time is: Fri Mar 20 14:33:28 2020 EDT<br>
SMART support is: Available - device has SMART capability.<br>
SMART support is: Enabled<br>
<br>
=== START OF READ SMART DATA SECTION ===<br>
SMART overall-health self-assessment test result: PASSED<br>
<br>
General SMART Values:<br>
Offline data collection status: (0x00) Offline data collection activity<br>
was never started.<br>
Auto Offline Data Collection: Disabled.<br>
Self-test execution status: ( 0) The previous self-test routine completed<br>
without error or no self-test has ever<br>
been run.<br>
Total time to complete Offline<br>
data collection: (32820) seconds.<br>
Offline data collection<br>
capabilities: (0x7b) SMART execute Offline immediate.<br>
Auto Offline data collection<br>
on/off support.<br>
Suspend Offline collection upon new<br>
command.<br>
Offline surface scan supported.<br>
Self-test supported.<br>
Conveyance Self-test supported.<br>
Selective Self-test supported.<br>
SMART capabilities: (0x0003) Saves SMART data before entering<br>
power-saving mode.<br>
Supports SMART auto save timer.<br>
Error logging capability: (0x01) Error logging supported.<br>
General Purpose Logging supported.<br>
Short self-test routine<br>
recommended polling time: ( 2) minutes.<br>
Extended self-test routine<br>
recommended polling time: ( 349) minutes.<br>
Conveyance self-test routine<br>
recommended polling time: ( 5) minutes.<br>
SCT capabilities: (0x303d) SCT Status supported.<br>
SCT Error Recovery Control supported.<br>
SCT Feature Control supported.<br>
SCT Data Table supported.<br>
<br>
SMART Attributes Data Structure revision number: 16<br>
Vendor Specific SMART Attributes with Thresholds:<br>
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE<br>
UPDATED WHEN_FAILED RAW_VALUE<br>
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail<br>
Always - 0<br>
3 Spin_Up_Time 0x0027 205 164 021 Pre-fail<br>
Always - 4733<br>
4 Start_Stop_Count 0x0032 100 100 000 Old_age<br>
Always - 80<br>
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail<br>
Always - 0<br>
7 Seek_Error_Rate 0x002e 200 200 000 Old_age<br>
Always - 0<br>
9 Power_On_Hours 0x0032 074 074 000 Old_age<br>
Always - 19193<br>
10 Spin_Retry_Count 0x0032 100 253 000 Old_age<br>
Always - 0<br>
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age<br>
Always - 0<br>
12 Power_Cycle_Count 0x0032 100 100 000 Old_age<br>
Always - 80<br>
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age<br>
Always - 57<br>
193 Load_Cycle_Count 0x0032 200 200 000 Old_age<br>
Always - 114<br>
194 Temperature_Celsius 0x0022 117 106 000 Old_age<br>
Always - 33<br>
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age<br>
Always - 0<br>
197 Current_Pending_Sector 0x0032 200 200 000 Old_age<br>
Always - 0<br>
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age<br>
Offline - 0<br>
199 UDMA_CRC_Error_Count 0x0032 200 197 000 Old_age<br>
Always - 127<br>
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age<br>
Offline - 0<br>
<br>
SMART Error Log Version: 1<br>
No Errors Logged<br>
<br>
SMART Self-test log structure revision number 1<br>
Num Test_Description Status Remaining<br>
LifeTime(hours) LBA_of_first_error<br>
# 1 Short offline Completed without error 00% 19190 -<br>
# 2 Extended offline Completed without error 00% 9343 -<br>
<br>
SMART Selective self-test log data structure revision number 1<br>
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS<br>
1 0 0 Not_testing<br>
2 0 0 Not_testing<br>
3 0 0 Not_testing<br>
4 0 0 Not_testing<br>
5 0 0 Not_testing<br>
Selective self-test flags (0x0):<br>
After scanning selected spans, do NOT read-scan remainder of disk.<br>
If Selective self-test is pending on power-up, resume after 0 minute delay.<br>
<br>
Thanks,<br>
Alex<br>
<br>
><br>
> On Fri, 20 Mar 2020, 16:56 Alex <<a href="mailto:mysqlstudent@gmail.com" rel="noreferrer noreferrer" target="_blank">mysqlstudent@gmail.com</a>> wrote:<br>
>><br>
>> Hi,<br>
>><br>
>> I have a fedora30 system that was working fine until a message similar<br>
>> to the one below occurred. This is for a WDC WD30EFRX-68N disk. It<br>
>> seems to indicate it's an interface problem, but I can't be sure. I'm<br>
>> hoping someone can help me identify the problem for sure.<br>
>><br>
>> What more information can I provide to help troubleshoot this problem?<br>
>><br>
>> [ 6.754777] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)<br>
>> [ 6.755530] ata4.00: ATA-10: WDC WD30EFRX-68N32N0, 82.00A82, max UDMA/133<br>
>> [ 6.755676] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA<br>
>> [ 6.756530] ata4.00: configured for UDMA/133<br>
>> [ 6.756936] scsi 3:0:0:0: Direct-Access ATA WDC<br>
>> WD30EFRX-68N 0A82 PQ: 0 ANSI: 5<br>
>> [ 6.757470] sd 3:0:0:0: Attached scsi generic sg3 type 0<br>
>> [ 6.757511] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks:<br>
>> (3.00 TB/2.73 TiB)<br>
>> [ 6.757858] sd 3:0:0:0: [sdd] 4096-byte physical blocks<br>
>> [ 6.758014] sd 3:0:0:0: [sdd] Write Protect is off<br>
>> [ 6.758154] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00<br>
>> [ 6.758171] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:<br>
>> enabled, doesn't support DPO or FUA<br>
>> [ 6.785443] ata4.00: exception Emask 0x50 SAct 0x20000000 SErr<br>
>> 0x280901 action 0x6 frozen<br>
>> [ 6.785683] ata4.00: irq_stat 0x08000000, interface fatal error<br>
>> [ 6.785825] ata4: SError: { RecovData UnrecovData HostInt 10B8B BadCRC }<br>
>> [ 6.785971] ata4.00: failed command: READ FPDMA QUEUED<br>
>> [ 6.786117] ata4.00: cmd 60/08:e8:00:00:00/00:00:00:00:00/40 tag 29<br>
>> ncq dma 4096 in<br>
>> res 40/00:e8:00:00:00/00:00:00:00:00/40 Emask<br>
>> 0x50 (ATA bus error)<br>
>> [ 6.786561] ata4.00: status: { DRDY }<br>
>> [ 6.786700] ata4: hard resetting link<br>
>> [ 7.098766] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)<br>
>> [ 7.100161] ata4.00: configured for UDMA/133<br>
>> [ 7.100313] ata4: EH complete<br>
>> [ 7.118461] ata4: limiting SATA link speed to 3.0 Gbps<br>
>> [ 7.118608] ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x280900<br>
>> action 0x6 frozen<br>
>> [ 7.118844] ata4.00: irq_stat 0x08000000, interface fatal error<br>
>> [ 7.118987] ata4: SError: { UnrecovData HostInt 10B8B BadCRC }<br>
>> [ 7.119129] ata4.00: failed command: READ FPDMA QUEUED<br>
>> [ 7.119274] ata4.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0<br>
>> ncq dma 4096 in<br>
>> res 40/00:00:00:00:00/00:00:00:00:00/40 Emask<br>
>> 0x50 (ATA bus error)<br>
>> [ 7.119713] ata4.00: status: { DRDY }<br>
>> [ 7.119852] ata4: hard resetting link<br>
>> [ 7.426739] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320)<br>
>> [ 7.428175] ata4.00: configured for UDMA/133<br>
>> [ 7.428326] ata4: EH complete<br>
>> [ 7.467092] sdd: sdd1<br>
>> [ 7.467737] sd 3:0:0:0: [sdd] Attached SCSI disk<br>
>> [ 7.468101] sdd: detected capacity change from 0 to 3000592982016<br>
>> [ 7.468393] sdd: detected capacity change from 0 to 3000592982016<br>
>> _______________________________________________<br>
>> Smartmontools-support mailing list<br>
>> <a href="mailto:Smartmontools-support@listi.jpberlin.de" rel="noreferrer noreferrer" target="_blank">Smartmontools-support@listi.jpberlin.de</a><br>
>> <a href="https://listi.jpberlin.de/mailman/listinfo/smartmontools-support" rel="noreferrer noreferrer noreferrer" target="_blank">https://listi.jpberlin.de/mailman/listinfo/smartmontools-support</a><br>
</blockquote></div>
</div></div>