<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>Hello,</p>
<p>I have bought a new hard drive and I would like to have your
opinion about my new hard drive. Here is the smart report:</p>
<p>$ sudo smartctl -a /dev/sdb<br>
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-47-generic]
(local build)<br>
Copyright (C) 2002-16, Bruce Allen, Christian Franke,
<a class="moz-txt-link-abbreviated" href="http://www.smartmontools.org">www.smartmontools.org</a><br>
<br>
=== START OF INFORMATION SECTION ===<br>
Device Model: ST1000DM010-2EP102<br>
Serial Number: ZN1179YR<br>
LU WWN Device Id: 5 000c50 0b3e0053a<br>
Firmware Version: CC43<br>
User Capacity: 1 000 204 886 016 bytes [1,00 TB]<br>
Sector Sizes: 512 bytes logical, 4096 bytes physical<br>
Rotation Rate: 7200 rpm<br>
Form Factor: 3.5 inches<br>
Device is: Not in smartctl database [for details use: -P
showall]<br>
ATA Version is: ATA8-ACS T13/1699-D revision 4<br>
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)<br>
Local Time is: Wed Apr 17 11:04:51 2019 CEST<br>
SMART support is: Available - device has SMART capability.<br>
SMART support is: Enabled<br>
<br>
=== START OF READ SMART DATA SECTION ===<br>
SMART overall-health self-assessment test result: PASSED<br>
<br>
General SMART Values:<br>
Offline data collection status: (0x82) Offline data collection
activity<br>
was completed without error.<br>
Auto Offline Data Collection: Enabled.<br>
Self-test execution status: ( 0) The previous self-test
routine completed<br>
without error or no self-test has ever <br>
been run.<br>
Total time to complete Offline <br>
data collection: ( 0) seconds.<br>
Offline data collection<br>
capabilities: (0x7b) SMART execute Offline immediate.<br>
Auto Offline data collection on/off support.<br>
Suspend Offline collection upon new<br>
command.<br>
Offline surface scan supported.<br>
Self-test supported.<br>
Conveyance Self-test supported.<br>
Selective Self-test supported.<br>
SMART capabilities: (0x0003) Saves SMART data before
entering<br>
power-saving mode.<br>
Supports SMART auto save timer.<br>
Error logging capability: (0x01) Error logging
supported.<br>
General Purpose Logging supported.<br>
Short self-test routine <br>
recommended polling time: ( 1) minutes.<br>
Extended self-test routine<br>
recommended polling time: ( 102) minutes.<br>
Conveyance self-test routine<br>
recommended polling time: ( 2) minutes.<br>
SCT capabilities: (0x1085) SCT Status supported.<br>
<br>
SMART Attributes Data Structure revision number: 10<br>
Vendor Specific SMART Attributes with Thresholds:<br>
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE<br>
1 Raw_Read_Error_Rate 0x000f 083 066 006 Pre-fail
Always - 204319511<br>
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail
Always - 0<br>
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 15<br>
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0<br>
7 Seek_Error_Rate 0x000f 100 253 045 Pre-fail
Always - 552644<br>
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 33<br>
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0<br>
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 15<br>
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age
Always - 0<br>
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0<br>
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0<br>
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0<br>
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0<br>
190 Airflow_Temperature_Cel 0x0022 074 071 040 Old_age
Always - 26 (Min/Max 18/26)<br>
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 15<br>
194 Temperature_Celsius 0x0022 026 018 000 Old_age
Always - 26 (0 18 0 0 0)<br>
195 Hardware_ECC_Recovered 0x001a 004 001 000 Old_age
Always - 204319511<br>
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0<br>
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0<br>
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0<br>
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 33 (24 227 0)<br>
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 310079264<br>
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 175067181<br>
<br>
SMART Error Log Version: 1<br>
No Errors Logged<br>
<br>
SMART Self-test log structure revision number 1<br>
No self-tests have been logged. [To run self-tests, use: smartctl
-t]<br>
<br>
SMART Selective self-test log data structure revision number 1<br>
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS<br>
1 0 0 Not_testing<br>
2 0 0 Not_testing<br>
3 0 0 Not_testing<br>
4 0 0 Not_testing<br>
5 0 0 Not_testing<br>
Selective self-test flags (0x0):<br>
After scanning selected spans, do NOT read-scan remainder of
disk.<br>
If Selective self-test is pending on power-up, resume after 0
minute delay.<br>
</p>
<p><br>
</p>
<p><br>
</p>
<p>I notice that Raw_Read_Error_Rate and Seek_Error_Rate have
already high RAW values. <code></code><code></code>Does this
drive have a problem? Do you think I may return it?<br>
</p>
<p>I read some articles saying that seagate RAW values are often
high. Is it right?<br>
</p>
<p>Thanks in advance</p>
</body>
</html>