[smartmontools-support] Interpreting raw SMART data block (LSI MegaRAID)

[Jim Garrison]

I have an LSI MegaRAID 9260-4i (SAS/SATA) with SATA drives (4x 
WD4003FFBX6).  The drivers I have do not seem to support SMART access 
from smartctl (as documented in the FAQ).

I can get a raw hex dump of the SMART data block from storcli.

Is there any way to feed that data into smartctl to get it interpreted?

-- 
Jim Garrison
jhg at acm.org