[smartmontools-support] NVMe Critical Warning: 0x09

[Janos Dohanics]

Hello,

I have a few weeks old ThinkPad E14 with a WD Green SN350 1TB 2G0C.

Recently it started to blue screen on startup; it never finishes
booting Windows 10. Do I have a failed NVMe?

Using smartctl -a I get:

[root at sysrescue ~]# smartctl -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.19-1-lts] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       WD Green SN350 1TB 2G0C
Serial Number:                      245210801006
Firmware Version:                   236050WD
PCI Vendor/Subsystem ID:            0x15b7
IEEE OUI Identifier:                0x001b44
Total NVM Capacity:                 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity:           0
Controller ID:                      0
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,000,204,886,016 [1.00 TB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            001b44 8b4d87bc98
Local Time is:                      Wed Apr 30 14:55:54 2025 UTC
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x1e):         Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg
Maximum Data Transfer Size:         128 Pages
Warning  Comp. Temp. Threshold:     80 Celsius
Critical Comp. Temp. Threshold:     85 Celsius
Namespace 1 Features (0x02):        NA_Fields

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     3.50W    2.90W       -    0  0  0  0        0       0
 1 +     2.70W    2.30W       -    0  0  0  0        0       0
 2 +     1.90W    1.80W       -    0  0  0  0        0       0
 3 -   0.0250W       -        -    3  3  3  3     3900   11000
 4 -   0.0050W       -        -    4  4  4  4     4249   45750

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         2
 1 -    4096       0         1

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
- available spare has fallen below threshold
- media has been placed in read only mode

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x09
Temperature:                        42 Celsius
Available Spare:                    0%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    285,051 [145 GB]
Data Units Written:                 640,837 [328 GB]
Host Read Commands:                 2,782,789
Host Write Commands:                23,920,420,079
Controller Busy Time:               1,958
Power Cycles:                       16
Power On Hours:                     293
Unsafe Shutdowns:                   4
Media and Data Integrity Errors:    0
Error Information Log Entries:      1
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               47 Celsius
Temperature Sensor 2:               42 Celsius
Temperature Sensor 3:               39 Celsius
Temperature Sensor 4:               39 Celsius
Temperature Sensor 5:               39 Celsius
Temperature Sensor 6:               41 Celsius

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
No Self-tests Logged

When I try a short test, I get:

[root at sysrescue ~]# smartctl -t short /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.19-1-lts] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

NVMe Self-test cmd with type=0x1, nsid=0xffffffff failed: Invalid Field in Command (0x4002)

Would you please advise?

-- 
Janos Dohanics
<smartctl at 3dresearch.com>