[smartmontools-support] Error on output of -a

Craig Yoshioka yoshiokc at ohsu.edu
Mon Apr 1 23:50:30 CEST 2024


root at pncc-qb-2 ~ # ❯❯❯ smartctl -a /dev/sdal
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.18.0-513.11.1.el8_9.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST16000NM004J
Revision:             E002
Compliance:           SPC-5
User Capacity:        16,000,900,661,248 bytes [16.0 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LU is fully provisioned
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500d751f5c3
Serial number:        ZR527Z4G0000C1475XGJ
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Apr  1 14:48:42 2024 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned = 3
Power on minutes since format <not available>
Current Drive Temperature:     34 C
Drive Trip Temperature:        60 C

Accumulated power on time, hours:minutes 13112:32
Manufactured in week 25 of year 2021
Specified cycle count over device lifetime:  50000
Accumulated start-stop cycles:  15
Specified load-unload count over device lifetime:  600000
Accumulated load-unload cycles:  55661
Elements in grown defect list: 3

Vendor (Seagate Cache) information
  Blocks sent to initiator = 4289115512
  Blocks received from initiator = 3848930848
  Blocks read from cache and sent to initiator = 1715851970
  Number of read and write commands whose size <= segment size = 220073933
  Number of read and write commands whose size > segment size = 210196

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 13112.53
  number of minutes until next internal SMART test = 9

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:          0    24141         0     24141      24143     532160.632           0
write:         0        0         0         0          0      94564.398           0

Non-medium error count:        1

  Pending defect count:8 Pending Defects: index, LBA and accumulated_power_on_hours follow
     1:  0x1d31b2dd0       ,  13112
Smartctl: Exception: json.cpp(39): Assertion failed: 'a' <= c && c <= 'z'
Please inform smartmontools-support at listi.jpberlin.de, including output of smartctl -V.


root at pncc-qb-2 ~ # ❯❯❯ smartctl -V -a /dev/sdal                                                                                                                                             
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.18.0-513.11.1.el8_9.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License; either
version 2, or (at your option) any later version.
See http://www.gnu.org for further details.

smartmontools release 7.1 dated 2019-12-30 at 15:00:11 UTC
smartmontools SVN rev 5022 dated 2019-12-30 at 15:00:49
smartmontools build host: x86_64-redhat-linux-gnu
smartmontools build with: C++14, GCC 8.5.0 20210514 (Red Hat 8.5.0-19)
smartmontools configure arguments: '--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu' '--program-prefix=' '--disable-dependency-tracking' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--with-selinux' '--with-libcap-ng=yes' '--with-libsystemd' '--with-systemdsystemunitdir=/usr/lib/systemd/system' '--sysconfdir=/etc/smartmontools/' '--with-systemdenvfile=/etc/sysconfig/smartmontools' 'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu' 'CXXFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' 'LDFLAGS=-Wl,-z,relro  -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' 'CFLAGS=-O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection' 'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig'


More information about the Smartmontools-support mailing list