[smartmontools-support] Smartctl: Exception: json.cpp(39): Assertion failed: 'a' <= c && c <= 'z'
Juan Jose Villaplana Querol
villapla at uji.es
Wed Nov 29 10:21:35 CET 2023
# smartctl -a /dev/sdab
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-362.8.1.el9_3.x86_64]
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: ST16000NM002G
Revision: E004
Compliance: SPC-5
User Capacity: 16,000,900,661,248 bytes [16.0 TB]
Logical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c500aec1ac23
Serial number: ZL21KV300000C0048NRB
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Nov 29 10:18:49 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Grown defects during certification = 0
Total blocks reassigned during format = 0
Total new blocks reassigned = 68
Power on minutes since format = 2097745
Current Drive Temperature: 26 C
Drive Trip Temperature: 60 C
Accumulated power on time, hours:minutes 34963:23
Manufactured in week 45 of year 2019
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 85
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 46781
Elements in grown defect list: 68
Vendor (Seagate Cache) information
Blocks sent to initiator = 378272794
Blocks received from initiator = 3409641323
Blocks read from cache and sent to initiator = 11732435
Number of read and write commands whose size <= segment size = 239103597
Number of read and write commands whose size > segment size = 20029230
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 34963.38
number of minutes until next internal SMART test = 26
Error counter log:
Errors Corrected by Total Correction Gigabytes
Total
ECC rereads/ errors algorithm processed
uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes]
errors
read: 0 2324 0 2324 2324 3432064.422
0
write: 0 0 0 0 0 207552.890
0
verify: 0 21 0 21 21 133.190
0
Non-medium error count: 0
Pending defect count:2 Pending Defects: index, LBA and
accumulated_power_on_hours follow
1: 0x864d770 , 34962
Smartctl: Exception: json.cpp(39): Assertion failed: 'a' <= c && c <= 'z'
Please inform smartmontools-support at listi.jpberlin.de, including output of
smartctl -V.
#
# smartctl -V
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-362.8.1.el9_3.x86_64]
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License; either
version 2, or (at your option) any later version.
See http://www.gnu.org for further details.
smartmontools release 7.2 dated 2020-12-30 at 16:48:30 UTC
smartmontools SVN rev 5155 dated 2020-12-30 at 16:49:18
smartmontools build host: x86_64-redhat-linux-gnu
smartmontools build with: C++17, GCC 11.3.1 20221121 (Red Hat 11.3.1-4)
smartmontools configure arguments: '--build=x86_64-redhat-linux-gnu'
'--host=x86_64-redhat-linux-gnu' '--program-prefix='
'--disable-dependency-tracking' '--prefix=/usr' '--exec-prefix=/usr'
'--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc'
'--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib64'
'--libexecdir=/usr/libexec' '--localstatedir=/var'
'--sharedstatedir=/var/lib' '--mandir=/usr/share/man'
'--infodir=/usr/share/info' '--with-selinux' '--with-libcap-ng=yes'
'--with-libsystemd' '--with-systemdsystemunitdir=/usr/lib/systemd/system'
'--sysconfdir=/etc/smartmontools/'
'--with-systemdenvfile=/etc/sysconfig/smartmontools'
'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu'
'CXX=g++' 'CXXFLAGS=-O2 -flto=auto -ffat-lto-objects -fexceptions -g
-grecord-gcc-switches -pipe -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong
-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -march=x86-64-v2
-mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection
-fcf-protection' 'LDFLAGS=-Wl,-z,relro -Wl,--as-needed -Wl,-z,now
-specs=/usr/lib/rpm/redhat/redhat-hardened-ld
-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 ' 'CC=gcc' 'CFLAGS=-O2
-flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe
-Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2
-Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
-fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1
-m64 -march=x86-64-v2 -mtune=generic -fasynchronous-unwind-tables
-fstack-clash-protection -fcf-protection'
'PKG_CONFIG_PATH=:/usr/lib64/pkgconfig:/usr/share/pkgconfig'
#
# cat /etc/os-release
NAME="Red Hat Enterprise Linux"
VERSION="9.3 (Plow)"
ID="rhel"
ID_LIKE="fedora"
VERSION_ID="9.3"
PLATFORM_ID="platform:el9"
PRETTY_NAME="Red Hat Enterprise Linux 9.3 (Plow)"
ANSI_COLOR="0;31"
LOGO="fedora-logo-icon"
CPE_NAME="cpe:/o:redhat:enterprise_linux:9::baseos"
HOME_URL="https://www.redhat.com/"
DOCUMENTATION_URL="
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9"
BUG_REPORT_URL="https://bugzilla.redhat.com/"
REDHAT_BUGZILLA_PRODUCT="Red Hat Enterprise Linux 9"
REDHAT_BUGZILLA_PRODUCT_VERSION=9.3
REDHAT_SUPPORT_PRODUCT="Red Hat Enterprise Linux"
REDHAT_SUPPORT_PRODUCT_VERSION="9.3"
#
--
Juan José Villaplana Querol/Servei d'Informàtica/Universitat Jaume I
Powered by GMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20231129/12fc197c/attachment.htm>
More information about the Smartmontools-support
mailing list