[smartmontools-support] Write amplification using NVMe Endurance Group Log (Log Identifier 09h)
Franc Zabkar
fzabkar at internode.on.net
Sun Feb 5 17:52:33 CET 2023
Thanks.
Does this mean that this device doesn't support this feature, or does it
mean that smartctl doesn't support it? I know that an SK Hynix BC711 SSD
doesn't support it, so this feature appears to be optional.
On 5/02/2023 7:48 am, James wrote:
>
> On 2023-02-04 12:40, Franc Zabkar wrote:
>> Could someone tell me whether GSmartControl (Windows) or smartctl
>> (Linux) or any other SMART tool reports the Endurance Group Log (Log
>> Identifier 09h) for NVMe SSDs? I don't have an NVMe SSD to enable me
>> to perform this check.
>
>
> $ sudo smartctl -a /dev/nvme0n1p1
> smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.0-29-generic] (local
> build)
> Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
>
> === START OF INFORMATION SECTION ===
> Model Number: KINGSTON RBUSNS8154P3128GJ1
> Serial Number: 50026B7684581795
> Firmware Version: E8FK12.3
> PCI Vendor/Subsystem ID: 0x2646
> IEEE OUI Identifier: 0x0026b7
> Total NVM Capacity: 128,035,676,160 [128 GB]
> Unallocated NVM Capacity: 0
> Controller ID: 0
> NVMe Version: 1.2
> Number of Namespaces: 1
> Namespace 1 Size/Capacity: 128,035,676,160 [128 GB]
> Namespace 1 Formatted LBA Size: 512
> Namespace 1 IEEE EUI-64: 0026b7 6845817955
> Local Time is: Sat Feb 4 15:46:02 2023 EST
> Firmware Updates (0x12): 1 Slot, no Reset required
> Optional Admin Commands (0x0007): Security Format Frmw_DL
> Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
> Log Page Attributes (0x04): Ext_Get_Lg
> Maximum Data Transfer Size: 512 Pages
> Warning Comp. Temp. Threshold: 84 Celsius
> Critical Comp. Temp. Threshold: 88 Celsius
>
> Supported Power States
> St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
> 0 + 7.90W 0.0790W - 0 0 0 0 600 600
> 1 + 7.90W 0.0790W - 0 0 0 0 600 600
> 2 + 7.90W 0.0790W - 0 0 0 0 600 600
> 3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000
> 4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000
>
> Supported LBA Sizes (NSID 0x1)
> Id Fmt Data Metadt Rel_Perf
> 0 + 512 0 1
> 1 - 4096 0 0
>
> === START OF SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> SMART/Health Information (NVMe Log 0x02)
> Critical Warning: 0x00
> Temperature: 22 Celsius
> Available Spare: 100%
> Available Spare Threshold: 100%
> Percentage Used: 2%
> Data Units Read: 2,414,862 [1.23 TB]
> Data Units Written: 1,859,520 [952 GB]
> Host Read Commands: 27,830,700
> Host Write Commands: 30,123,471
> Controller Busy Time: 39
> Power Cycles: 515
> Power On Hours: 114
> Unsafe Shutdowns: 12
> Media and Data Integrity Errors: 0
> Error Information Log Entries: 700
> Warning Comp. Temperature Time: 0
> Critical Comp. Temperature Time: 0
> Temperature Sensor 2: 22 Celsius
>
> Error Information (NVMe Log 0x01, 16 of 16 entries)
> Num ErrCount SQId CmdId Status PELoc LBA NSID VS
> 0 700 0 0x0016 0x0005 - 6 0 -
> 1 699 0 0x0015 0x0005 - 12 0 -
> 2 698 0 0x000b 0x0004 - 4009754624 1 -
> 3 697 0 0x000b 0x0004 - 4009754624 1 -
> 4 696 0 0x000b 0x0004 - 4009754624 1 -
> 5 695 0 0x000b 0x0004 - 4009754624 1 -
> 6 694 0 0x000b 0x0004 - 4009754624 1 -
> 7 693 0 0x000b 0x0004 - 4009754624 1 -
> 8 692 0 0x000b 0x0004 - 4009754624 1 -
> 9 691 0 0x000b 0x0004 - 4009754624 1 -
> 10 690 0 0x000b 0x0004 - 4009754624 1 -
> 11 689 0 0x000b 0x0004 - 4009754624 1 -
> 12 688 0 0x000b 0x0004 - 4009754624 1 -
> 13 687 0 0x000b 0x0004 - 4009754624 1 -
> 14 686 0 0x000b 0x0004 - 4009754624 1 -
> 15 685 0 0x000b 0x0004 - 4009754624 1 -
>
> _______________________________________________
> Smartmontools-support mailing list
> Smartmontools-support at listi.jpberlin.de
> https://listi.jpberlin.de/mailman/listinfo/smartmontools-support
More information about the Smartmontools-support
mailing list