[smartmontools-support] NVME drive won't initiate tests
Thane K. Sherrington
thane at computerconnectionltd.com
Fri Dec 15 18:33:13 CET 2023
I can't smartctl to run tests on WD SN770 NVME drives (see results below).
The two tests that are complete were done through the WD Dashboard software.
When I run smartctl -t long -d nvme /dev/sdb
I get the output below, but no tests actually starts.
smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w10-2004] (sf-7.4-1)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
Self-test has begun
Use smartctl -X to abort test
This doesn't happen 100% of the time. Sometimes, tests will run, but
I've done nothing different, and if the tests runs once, they often
won't run a second time, even with no change in the system.
I'm testing in W10 Pro x64, usually with AMD-based motherboards.
smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w10-22H2] (sf-7.4-1)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: WD_BLACK SN770 500GB
Serial Number: XXXXXXXXXXX
Firmware Version: 731120WD
PCI Vendor/Subsystem ID: 0x15b7
IEEE OUI Identifier: 0x001b44
Total NVM Capacity: 500,107,862,016 [500 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 500,107,862,016 [500 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 001b44 8b4e530600
Local Time is: Fri Dec 15 10:14:27 2023 AST
Firmware Updates (0x14): 2 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero
Sav/Sel_Feat Timestmp Verify
Log Page Attributes (0x7e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Pers_Ev_Lg Log0_FISE_MI Telmtry_Ar_4
Maximum Data Transfer Size: 256 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 88 Celsius
Namespace 1 Features (0x02): NA_Fields
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 4.70W 4.30W - 0 0 0 0 0 0
1 + 3.00W 3.00W - 0 0 0 0 0 0
2 + 2.20W 2.00W - 0 0 0 0 0 0
3 - 0.0150W - - 3 3 3 3 1500 2500
4 - 0.0050W - - 4 4 4 4 10000 6000
5 - 0.0033W - - 5 5 5 5 176000 25000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 38 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 2%
Data Units Read: 30,248,668 [15.4 TB]
Data Units Written: 33,817,425 [17.3 TB]
Host Read Commands: 471,008,003
Host Write Commands: 523,740,725
Controller Busy Time: 895
Power Cycles: 6
Power On Hours: 57
Unsafe Shutdowns: 0
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 58 Celsius
Temperature Sensor 2: 34 Celsius
Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged
Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
Num Test_Description Status Power_on_Hours
Failing_LBA NSID Seg SCT Code
0 Extended Completed without error 2 - -
- - -
1 Short Completed without error 2 - -
- - -
--
Thane K. Sherrington
Computer Connection, Ltd. ...taking the mystery out of computers since 1982.
Winner of the 2012 Ian Spencer - Excellence in Business Award
*Thanks for making us the Reader's Choice Best Computer Store in 2016,
2017, 2018 and 2019!*
95 College St., Antigonish,
NS B2G 1X6
902-863-3361 (phone)
902-863-2580 (fax)
thane at computerconnectionltd.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20231215/032edbd9/attachment.htm>
More information about the Smartmontools-support
mailing list