[smartmontools-support] Reading NVME log
Thane K. Sherrington
thane at computerconnectionltd.com
Mon Sep 12 18:42:36 CEST 2022
The following report is from a Kingston SSD. I've been having problems
with booting with this drive - randomly I get messages that there is no
boot device. I'm not sure if it's the motherboard or the SSD.
The report says this:
SMART overall-health self-assessment test result: PASSED
Available Spare: 100%
Available Spare Threshold: 100%
So that all looks good, but there are a lot of errors in the log, and
I'm wondering if they are a bad sign.
Thanks!
smartctl pre-7.4 2022-07-17 r5397 [i686-w64-mingw32-w10-2004(64)] (CircleCI)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON RBUSNS8154P3256GJ1
Serial Number: 50026B7682832579
Firmware Version: E8FK12.3
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Total NVM Capacity: 256,060,514,304 [256 GB]
Unallocated NVM Capacity: 0
Controller ID: 0
NVMe Version: 1.2
Number of Namespaces: 1
Namespace 1 Size/Capacity: 256,060,514,304 [256 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 6828325795
Local Time is: Mon Sep 12 07:30:31 2022 AST
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0007): Security Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x04): Ext_Get_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 88 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 7.90W 0.0790W - 0 0 0 0 600 600
1 + 7.90W 0.0790W - 0 0 0 0 600 600
2 + 7.90W 0.0790W - 0 0 0 0 600 600
3 - 0.1000W 0.0790W - 3 3 3 3 1000 1000
4 - 0.0050W 0.0790W - 4 4 4 4 400000 90000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 29 Celsius
Available Spare: 100%
Available Spare Threshold: 100%
Percentage Used: 18%
Data Units Read: 87,163,875 [44.6 TB]
Data Units Written: 76,886,531 [39.3 TB]
Host Read Commands: 1,227,073,460
Host Write Commands: 1,191,414,783
Controller Busy Time: 2,773
Power Cycles: 3,339
Power On Hours: 1,047
Unsafe Shutdowns: 81
Media and Data Integrity Errors: 0
Error Information Log Entries: 4,504
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 29 Celsius
Error Information (NVMe Log 0x01, 16 of 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 4504 0 0x0002 0x0005 - 208 0 -
1 4503 0 0x0002 0x0005 - 208 0 -
2 4502 0 0x0007 0x0005 - 33555456 0 -
3 4501 0 0x0002 0x0005 - 208 0 -
4 4500 0 0x000d 0x0005 - 4009754624 1 -
5 4499 0 0x000a 0x0004 - 33555456 0 -
6 4498 0 0x0002 0x0005 - 208 0 -
7 4497 0 0x000d 0x0005 - 4009754624 1 -
8 4496 0 0x000a 0x0004 - 33555456 0 -
9 4495 0 0x000d 0x0005 - 4009754624 1 -
10 4494 0 0x000a 0x0004 - 33555456 0 -
11 4493 0 0x000d 0x0005 - 4009754624 1 -
12 4492 0 0x000a 0x0004 - 33555456 0 -
13 4491 0 0x000d 0x0005 - 4009754624 1 -
14 4490 0 0x000a 0x0004 - 33555456 0 -
15 4489 0 0x000d 0x0005 - 4009754624 1 -
More information about the Smartmontools-support
mailing list