[smartmontools-support] Raw output?

[Claudio Kuenzler]

>
> SMART/Health Information (NVMe Log 0x02)
> Critical Warning:                   0x00
> Temperature:                        51 Celsius
> Available Spare:                    86%
> Available Spare Threshold:          10%
> Percentage Used:                    0%
> Data Units Read:                    1.147.167 [587 GB]
> Data Units Written:                 1.945.358 [996 GB]
> Host Read Commands:                 15.382.874
> Host Write Commands:                18.487.599
> Controller Busy Time:               1.410
> Power Cycles:                       278
> Power On Hours:                     1.232
> Unsafe Shutdowns:                   277
> Media and Data Integrity Errors:    0
> Error Information Log Entries:      0
> Warning  Comp. Temperature Time:    0
> Critical Comp. Temperature Time:    0
>

These are your "raw" values. As this is a NVMe drive, smartctl tries to
read them from the nvme output.
You might also want to use https://github.com/linux-nvme/nvme-cli to read
the nvme information from the drive, there could be differences.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20210520/bd083cdf/attachment.htm>