[smartmontools-support] DEFAULT -n standby not working for Adaptec Raid

[David C. Partridge]

Or in fact how to ask the raid controller about the power status of each logical device as the RAID config is for power management by logical device.

 

D.

 

From: Smartmontools-support <smartmontools-support-bounces at listi.jpberlin.de> On Behalf Of David C. Partridge
Sent: 05 February 2021 16:41
To: Sachin.Kumar2 at microchip.com; Sagar.Biradar at microchip.com; Christian.Franke at t-online.de
Cc: smartmontools-support at listi.jpberlin.de; Tom.White at microchip.com
Subject: Re: [smartmontools-support] DEFAULT -n standby not working for Adaptec Raid

 

hdparm -C /dev/sdb reports standby for the logical device anyhow when the device is in Active status (which is wrong)

 

We need to know how to ask the raid controller the state of each of the *physical* devices which make up the raid array.

 

D.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20210205/75fbac3f/attachment.htm>