[smartmontools-support] Cannot read SMART data on Raspberry Pi, All good on Windows using different tools

[Ertan Küçükoğlu]

>-----Original Message-----
>From: Smartmontools-support [mailto:smartmontools-support-bounces at listi.jpberlin.de] On Behalf Of Christian Franke
>Sent: Saturday, June 15, 2019 5:56 PM
>To: Ertan Küçükoğlu <ertan at cronosmedikal.com>
>Cc: smartmontools-support at listi.jpberlin.de
>Subject: Re: [smartmontools-support] Cannot read SMART data on Raspberry Pi, All good on Windows using different tools
>
>None of the above idVendor values are in the current drive database. The output command 'smartctl -i /dev/sda' should then show the >actual USB Id. Please try and report the result. Then we could add it to the drive database.

Hello,

Below are outputs:
----------
pi at raspberrypi:~ $ sudo smartctl -i /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.19.42-v7+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x0850:0x0003 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary
----------
pi at raspberrypi:~ $ sudo smartctl -d sat -i /dev/sda
smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.19.42-v7+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     CHN mSATAM3 128
Serial Number:    M328CJ02260048
Firmware Version: Q1124A0
User Capacity:    128.035.676.160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jun 24 10:21:29 2019 +03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

pi at raspberrypi:~ $
----------

I will probably have 2-3 more drives from China. Should I report them here if they are not in database, too?

Thanks & regards,
Ertan