[smartmontools-support] Lttle help needed

[Andries Bester [Paradigm]]

I use Micron’s “msecli.exe” 

https://www.micron.com/~/media/documents/products/software/storage-executive-software/storageexecutive_linux_64bit.run

 

Eg:

 

C:\MICRON\msecli.exe -s -S

 

For help : msecli -h 

 


 


 


 

 

 

From: Smartmontools-support <smartmontools-support-bounces at listi.jpberlin.de> On Behalf Of Daniel Stoenciu
Sent: 30 May 2018 10:23
To: smartmontools-support at listi.jpberlin.de
Subject: [smartmontools-support] Lttle help needed

 

Hello,

 

I have a server  Dell PowerEdge R610 with CentOS release 6.9.

I am trying to read the SMART infos 'cause I get an error E1810 – hard drive 1 fault review and clear SEL.

I've checked the HDDs:

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          66      524288   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              66         588     4194304   82  Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3             588       60735   483130368   83  Linux

and when I want to do any command I get this:

 

[root]# sudo smartctl -H /dev/sda3
smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-696.13.2.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl open device: /dev/sda3 failed: INQUIRY failed
[root]#

 

May you please, help?

 

Thanks!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-support/attachments/20180530/c20a7d65/attachment.html>