[smartmontools-support] LITEON IT LCS-256L9S strange hours and possible failure?
Thane K. Sherrington
thane at computerconnectionltd.com
Tue Apr 10 18:48:11 CEST 2018
I have a new LITEON IT LCS-256L9S with the following report:
My questions are:
1)Why are the hours so high when it's brand new?
2)Do I worry about the errors reported
Thanks!
smartctl 6.7 2018-03-06 r4717 [i686-w64-mingw32-w10-1607] (daily-20180306)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEON IT LCS-256L9S
Serial Number: 002506104919
Firmware Version: HC81203
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 10 09:17:24 2018 ADT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail
Always - 0
5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail
Always - 0
9 Power_On_Hours 0x0002 100 100 000 Old_age
Always - 39
12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail
Always - 33
177 Wear_Leveling_Count 0x0003 100 100 000 Pre-fail
Always - 5557
178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 000 Pre-fail
Always - 1
181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail
Always - 0
182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail
Always - 0
187 Reported_Uncorrect 0x0003 100 100 000 Pre-fail
Always - 29
188 Command_Timeout 0x0003 100 100 000 Pre-fail
Always - 5
189 Unknown_SSD_Attribute 0x0003 100 100 000 Pre-fail
Always - 45
191 Unknown_SSD_Attribute 0x0003 100 100 000 Pre-fail
Always - 0
192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail
Always - 17
196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail
Always - 29
198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail
Always - 0
199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail
Always - 0
232 Available_Reservd_Space 0x0003 097 097 010 Pre-fail
Always - 0
241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail
Always - 35655
242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail
Always - 39937
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 2
ATA Error Count: 0
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
af 10 02 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 af 02 00 00 00 00 b8 00:00:00.000 NOP [Reserved subcommand]
[OBS-ACS-2]
00 af 02 00 00 00 00 b4 00:00:00.000 NOP [Reserved subcommand]
[OBS-ACS-2]
00 af 02 00 00 00 00 b1 00:00:00.000 NOP [Reserved subcommand]
[OBS-ACS-2]
00 af 02 00 00 00 00 ae 00:00:00.000 NOP [Reserved subcommand]
[OBS-ACS-2]
Error -1 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 00 10 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 00 00 00 02 34d+02:40:19.456 NOP [Abort queued commands]
00 00 00 00 00 00 00 02 34d+02:37:02.848 NOP [Abort queued commands]
00 00 00 00 00 00 00 02 34d+02:33:46.240 NOP [Abort queued commands]
00 00 00 00 00 00 00 02 34d+02:30:29.632 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 34d+02:27:13.024 NOP [Abort queued commands]
Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 af 00 00 00 00 9b
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
af 00 00 00 00 00 98 00 00:00:00.002 [RESERVED]
af 00 00 00 00 00 95 00 00:00:00.002 [RESERVED]
af 00 00 00 00 00 92 00 00:00:00.002 [RESERVED]
af 00 00 00 00 00 8f 00 00:00:00.002 [RESERVED]
00 00 00 00 00 03 00 00 00:00:00.000 NOP [Abort queued commands]
Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 00 00 8c af 02
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 00 00 89 af 02 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 86 af 02 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 82 af 02 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 00 7f af 02 00 00:00:00.000 NOP [Abort queued commands]
00 00 00 03 00 00 00 00 00:00:00.000 NOP [Abort queued commands]
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an
unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 00 7c af 02 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 79 af 02 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 76 af 02 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 73 af 02 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 00 0d 93 01 00 00 00 00:00:00.000 NOP [Abort queued commands]
00 03 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand]
[OBS-ACS-2]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 9984 -
# 2 Extended offline Aborted by host 90% 4352 -
# 3 Extended offline Completed without error 00% 9984 -
# 4 Extended offline Interrupted (host reset) 90% 9728 -
# 5 Extended offline Interrupted (host reset) 90% 9728 -
# 6 Extended offline Completed without error 00% 9216 -
# 7 Short offline Completed without error 00% 7680 -
# 8 Extended offline Aborted by host 90% 7680 -
# 9 Extended offline Completed without error 00% 7680 -
#10 Extended offline Completed without error 00% 7680 -
#11 Extended offline Completed without error 00% 7680 -
#12 Extended offline Completed without error 00% 7680 -
#13 Extended offline Completed without error 00% 7680 -
#14 Extended offline Completed without error 00% 7168 -
#15 Extended offline Completed without error 00% 7168 -
#16 Extended offline Completed without error 00% 7168 -
#17 Extended offline Completed without error 00% 7168 -
#18 Extended offline Interrupted (host reset) 90% 7168 -
#19 Extended offline Interrupted (host reset) 90% 7168 -
#20 Short offline Completed without error 00% 4864 -
#21 Extended offline Aborted by host 90% 4864 -
Selective Self-tests/Logging not supported
--
Thane K. Sherrington
Computer Connection, Ltd. ...taking the mystery out of computers since 1982.
Winner of the 2012 Ian Spencer - Excellence in Business Award
Winner of the 2016 Reader's Choice Best Computer Store
Winner of the 2017 Reader's Choice Best Computer Store
95 College St., Antigonish,
NS B2G 1X6
902-863-3361 (phone)
902-863-2580 (fax)
thane at computerconnectionltd.com
More information about the Smartmontools-support
mailing list