smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.13-1-pve] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Hitachi HTS545032B9SA02 Firmware Version: PB3AC60W User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sun Jan 19 12:29:52 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 106) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 110 110 040 - 4329 3 Spin_Up_Time POS--- 163 163 033 - 2 4 Start_Stop_Count -O--C- 097 097 000 - 4822 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 110 110 040 - 36 9 Power_On_Hours -O--C- 047 047 000 - 23505 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 3806 160 Unknown_Attribute -O--CK 100 100 000 - 0 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 1322849927168 192 Power-Off_Retract_Count -O--CK 100 100 000 - 137515368478 193 Load_Cycle_Count -O--C- 046 046 000 - 542460 194 Temperature_Celsius -O---- 157 157 000 - 35 (Min/Max 11/48) 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 085 085 000 - 4294971295 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa2 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 23505 - # 2 Extended offline Completed without error 00% 23305 - # 3 Extended offline Completed without error 00% 22560 - # 4 Extended offline Completed without error 00% 21857 - # 5 Extended offline Completed without error 00% 21111 - # 6 Extended offline Completed without error 00% 20391 - # 7 Extended offline Completed without error 00% 19696 - # 8 Extended offline Completed without error 00% 18950 - # 9 Extended offline Completed without error 00% 18231 - #10 Extended offline Completed without error 00% 17487 - #11 Extended offline Completed without error 00% 16767 - #12 Extended offline Completed without error 00% 16024 - #13 Extended offline Completed without error 00% 16010 - #14 Short offline Completed without error 00% 5808 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 20/41 Celsius Lifetime Min/Max Temperature: 11/48 Celsius Specified Max Operating Temperature: 32 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (203) Index Estimated Time Temperature Celsius 204 2020-01-19 04:32 35 **************** ... ..( 4 skipped). .. **************** 209 2020-01-19 04:37 35 **************** 210 2020-01-19 04:38 34 *************** ... ..( 13 skipped). .. *************** 224 2020-01-19 04:52 34 *************** 225 2020-01-19 04:53 35 **************** ... ..( 36 skipped). .. **************** 262 2020-01-19 05:30 35 **************** 263 2020-01-19 05:31 34 *************** ... ..( 9 skipped). .. *************** 273 2020-01-19 05:41 34 *************** 274 2020-01-19 05:42 35 **************** 275 2020-01-19 05:43 35 **************** 276 2020-01-19 05:44 34 *************** 277 2020-01-19 05:45 35 **************** 278 2020-01-19 05:46 35 **************** 279 2020-01-19 05:47 34 *************** ... ..(307 skipped). .. *************** 109 2020-01-19 10:55 34 *************** 110 2020-01-19 10:56 35 **************** 111 2020-01-19 10:57 35 **************** 112 2020-01-19 10:58 35 **************** 113 2020-01-19 10:59 34 *************** ... ..( 86 skipped). .. *************** 200 2020-01-19 12:26 34 *************** 201 2020-01-19 12:27 35 **************** 202 2020-01-19 12:28 35 **************** 203 2020-01-19 12:29 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS