smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.83-1-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: GJ0120CAGSP Serial Number: K647T8A25ECD LU WWN Device Id: 5 00000e 042f46a9a Firmware Version: HPG2 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Sun Dec 29 03:14:27 2019 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Disabled ATA Security is: Unavailable Unexpected SCT status 0x0010 (action_code=0, function_code=0) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 487) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 69) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 181731 2 Throughput_Performance P-S--- 100 100 030 - 19398952 3 Spin_Up_Time PO---- 100 100 025 - 0 4 Start_Stop_Count -O--CK 100 100 000 - 123 5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0) 7 Seek_Error_Rate POSR-- 100 100 047 - 413 8 Seek_Time_Performance P-S--- 100 100 019 - 0 9 Power_On_Hours -O--CK 012 012 000 - 44037 10 Spin_Retry_Count PO--C- 100 100 020 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 123 180 Unknown_HDD_Attribute POSR-K 100 100 098 - 0 184 End-to-End_Error -O--CK 253 253 000 - 0 187 Reported_Uncorrect -O--CK 253 100 000 - 60129542144 188 Command_Timeout -O--CK 253 099 000 - 3 189 High_Fly_Writes -O-RCK 253 100 000 - 0 190 Airflow_Temperature_Cel -O---K 074 052 000 - 26 (Min/Max 25/31) 191 G-Sense_Error_Rate -O--CK 253 253 000 - 16580608 192 Power-Off_Retract_Count -O--CK 100 100 000 - 90 193 Load_Cycle_Count -O--CK 100 100 000 - 11175 194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 13/50) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 662 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6929) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 5 200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 27297 203 Run_Out_Cancel -O---- 100 100 000 - 1533267149122 240 Head_Flying_Hours -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 51 Comprehensive SMART error log 0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xb6 GPL,SL VS 128 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged Warning! SMART Extended Self-test Log Structure (1/2) error: invalid SMART checksum. SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 44036 - # 2 Extended offline Completed without error 00% 44016 - # 3 Short offline Completed without error 00% 44014 - # 4 Vendor (0xd6) Unknown status (0xe) 20% 1158 - # 5 Offline Completed without error 00% 58072 - # 6 Vendor (0xfd) Completed: read failure 150% 0 549705778914 # 7 Offline Completed without error 00% 21957 - # 8 Offline Completed without error 00% 42096 - # 9 Vendor (0xc5) Completed: electrical failure 50% 0 0 #10 Offline Completed without error 00% 0 - #11 Offline Completed without error 00% 2437 - #12 Offline Completed without error 00% 0 - #13 Vendor (0xfb) Aborted by host 10% 21957 - #14 Vendor (0x50) Unknown status (0xe) 20% 1158 - #15 Offline Completed without error 00% 57888 - #16 Vendor (0xfd) Completed: read failure 150% 0 549705778915 #17 Reserved (0x86) Completed without error 40% 32765 - #18 Extended offline Completed without error 00% 0 - #19 Offline Completed without error 00% 42096 - #20 Offline Completed without error 00% 0 - #21 Short offline Completed without error 00% 43606 - #22 Short offline Completed without error 00% 43582 - #23 Short offline Completed without error 00% 43558 - #24 Short offline Completed without error 00% 43534 - #25 Extended offline Completed without error 00% 43512 - 3 of 3 failed self-tests are outdated by newer successful extended offline self-test # 2 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 27/33 Celsius Lifetime Min/Max Temperature: 13/50 Celsius Under/Over Temperature Limit Count: 0/0 Unexpected SCT status 0x000b (action_code=0, function_code=0) Read SCT Temperature History failed Unexpected SCT status 0x0010 (action_code=0, function_code=0) SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC