smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: D2RSTK251M11-0100.C Serial Number: A20YA011308000028 LU WWN Device Id: 5 e83a97 059bfb0b2 Firmware Version: 3.22E User Capacity: 100,030,242,816 bytes [100 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Aug 28 09:29:25 2017 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0010 (action_code=4, function_code=2) Wt Cache Reorder: N/A === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO--CK 112 112 050 - 58712203 5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0 9 Power_On_Hours -O--CK 074 074 000 - 23290 (170 80 0) 12 Power_Cycle_Count -O--CK 100 100 000 - 101 13 Read_Soft_Error_Rate -O--CK 050 050 000 - 254043079303307 100 Unknown_Attribute -O--CK 000 000 000 - 4533 170 Unknown_Attribute POSR-K+ 000 000 000 - 17344 171 Unknown_Attribute -O-R-- 000 000 000 - 0 172 Unknown_Attribute -O--CK 000 000 000 - 0 174 Unknown_Attribute ----CK 000 000 000 - 102 177 Wear_Leveling_Count ------ 000 000 000 - 1 181 Program_Fail_Cnt_Total -O-R-- 000 000 000 - 0 182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0 184 End-to-End_Error ------ 100 100 090 - 0 187 Reported_Uncorrect --SRC- 100 100 000 - 0 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) 195 Hardware_ECC_Recovered --SRC- 120 120 000 - 58712203 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 198 Offline_Uncorrectable ----C- 112 112 000 - 246887605075968 199 UDMA_CRC_Error_Count --S--- 200 200 000 - 0 201 Unknown_SSD_Attribute --SRC- 120 120 000 - 58712203 204 Soft_ECC_Correction --SRC- 120 120 000 - 58712203 230 Unknown_SSD_Attribute PO--C- 100 100 000 - 281470681743460 231 Temperature_Celsius PO--C- 094 094 010 - 21474836481 232 Available_Reservd_Space -O--CK 000 000 000 - 33 233 Media_Wearout_Indicator -O--CK 000 000 000 - 4432 234 Unknown_Attribute -O--CK 000 000 000 - 3813 235 Unknown_Attribute PO--CK 100 100 002 - 0 241 Total_LBAs_Written -O--CK 000 000 000 - 3813 242 Total_LBAs_Read -O--CK 000 000 000 - 772 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 16 Ext. Comprehensive SMART error log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa8 GPL,SL VS 16 Device vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (16 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 00 00 00 01 00 00 Error: Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Self-test routine in progress 50% 23290 - # 2 Offline Self-test routine in progress 10% 23170 - # 3 Offline Self-test routine in progress 20% 23170 - # 4 Offline Self-test routine in progress 20% 23170 - # 5 Offline Self-test routine in progress 30% 23170 - # 6 Offline Self-test routine in progress 40% 23170 - # 7 Offline Self-test routine in progress 40% 23170 - # 8 Offline Self-test routine in progress 50% 23170 - # 9 Offline Self-test routine in progress 60% 23170 - #10 Offline Self-test routine in progress 60% 23170 - #11 Offline Self-test routine in progress 80% 23169 - #12 Extended offline Self-test routine in progress 10% 23160 - #13 Extended offline Self-test routine in progress 10% 23160 - #14 Extended offline Self-test routine in progress 20% 23160 - #15 Extended offline Self-test routine in progress 40% 23159 - #16 Extended offline Self-test routine in progress 60% 23159 - #17 Extended offline Self-test routine in progress 70% 23159 - #18 Extended offline Self-test routine in progress 70% 23159 - #19 Extended offline Self-test routine in progress 80% 23159 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/30 Celsius Lifetime Min/Max Temperature: 30/30 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (1) Index Estimated Time Temperature Celsius 2 2017-08-28 01:32 ? - ... ..(476 skipped). .. - 1 2017-08-28 09:29 ? - SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS