[Smartmontools-database] HPx911w

[Gabriele Pohl]

Dear Florin,

thanks for your contribution but it is not sufficient unfortunately.

We need the full output of a working smartctl call
in your case I assume: 

smartctl -q noserial -x -d sat /dev/sdX > smartctl-HPx911w.txt

LINUX:   Use the forms "/dev/sd[a-z]" for ATA/SATA and SCSI/SAS devices.

fyi and kind regards,

Gabriele

On Fri, 10 Jan 2025 21:59:40 +0100
smartmontools-database-bounces at listi.jpberlin.de wrote:

> Hello again,
> 
> I think smartctl -x /dev/sdX does not provide any usefull data but it 
> works with smartctl -x -d sat /dev/sdX
> 
> here are the lines you can add to the drivedb.h
> 
>    // HP
>    { "USB: HP x911w",
>      "0x03f0:0x0c5c",
>      "", // Firmware version (empty)
>      "", // Serial number (empty)
>      "-d sat"
>    },
> 
> 
> 
> On 09.01.25 22:38, Florin Grigore wrote:
> > Dear all,
> >
> > I hope I have correctly understood and followed the process for 
> > requesting an update to the database (drivedb.h) with a new SSD USB SATA.
> > Attached, you will find the file generated after running the command 
> > (smartctl -x /dev/sdX > smartctl-VENDOR-MODEL.txt).
> > Please let me know if you require any additional information regarding 
> > the drive.
> >
> > Best regards,
> >
> >  
> 
-------------- next part --------------
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-28-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdc: Unknown USB bridge [0x03f0:0x0c5c (0x148)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary