[Smartmontools-database] smartctl-WDC-WD64PURZ-74BWUY0
Илья Храмцовский
connect at a4u.expert
Sun Feb 2 19:14:04 CET 2025
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20250202/43b095ce/attachment-0001.htm>
-------------- next part --------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-205-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD64PURZ-74BWUY0
Serial Number: WD-WX42D24RX8Z2
LU WWN Device Id: 5 0014ee 2c0ea0aeb
Firmware Version: 80.00A80
User Capacity: 6 001 175 126 016 bytes [6,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Feb 2 21:10:39 2025 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 659) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 224 224 021 - 3791
4 Start_Stop_Count -O--CK 034 034 000 - 66838
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 097 097 000 - 2555
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 034 034 000 - 66836
192 Power-Off_Retract_Count -O--CK 111 111 000 - 66819
193 Load_Cycle_Count -O--CK 200 200 000 - 18
194 Temperature_Celsius -O---K 118 110 000 - 32
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 298 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 43 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 43 [18] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2f e0 00 Error: UNC at LBA = 0x13f2462f = 334644783
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2f e0 08 24d+00:36:33.651 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:36:33.650 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 2e e0 08 24d+00:36:25.889 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:36:25.889 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 2e e0 08 24d+00:36:23.523 WRITE SECTORS(S) EXT
Error 42 [17] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2e e0 00 Error: UNC at LBA = 0x13f2462e = 334644782
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2e e0 08 24d+00:36:18.181 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:36:18.181 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 2d e0 08 24d+00:36:05.194 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:36:05.193 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 2d e0 08 24d+00:36:03.063 WRITE SECTORS(S) EXT
Error 41 [16] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2d e0 00 Error: UNC at LBA = 0x13f2462d = 334644781
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2d e0 08 24d+00:35:56.335 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:56.335 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 2c e0 08 24d+00:35:50.933 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:50.932 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 2c e0 08 24d+00:35:48.757 WRITE SECTORS(S) EXT
Error 40 [15] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2c e0 00 Error: UNC at LBA = 0x13f2462c = 334644780
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2c e0 08 24d+00:35:39.716 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:39.715 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 2b e0 08 24d+00:35:32.882 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:32.881 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 2b e0 08 24d+00:35:29.161 WRITE SECTORS(S) EXT
Error 39 [14] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2b e0 00 Error: UNC at LBA = 0x13f2462b = 334644779
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2b e0 08 24d+00:35:20.933 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:20.932 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 2a e0 08 24d+00:35:14.964 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:35:14.964 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 2a e0 08 24d+00:35:08.803 WRITE SECTORS(S) EXT
Error 38 [13] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 2a e0 00 Error: UNC at LBA = 0x13f2462a = 334644778
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 2a e0 08 24d+00:34:55.367 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:34:55.366 IDENTIFY DEVICE
24 00 00 00 01 00 00 13 f2 46 29 e0 08 24d+00:34:49.726 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:34:49.725 IDENTIFY DEVICE
34 00 00 00 01 00 00 13 f2 46 29 e0 08 24d+00:34:47.646 WRITE SECTORS(S) EXT
Error 37 [12] occurred at disk power-on lifetime: 1710 hours (71 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 13 f2 46 29 e0 00 Error: UNC at LBA = 0x13f24629 = 334644777
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
24 00 00 00 01 00 00 13 f2 46 29 e0 08 24d+00:34:35.228 READ SECTOR(S) EXT
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:34:35.228 IDENTIFY DEVICE
b0 00 d5 00 01 00 00 00 c2 4f 09 00 08 24d+00:34:11.705 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 06 00 08 24d+00:34:11.703 SMART READ LOG
b0 00 d5 00 01 00 00 00 c2 4f 01 00 08 24d+00:34:11.701 SMART READ LOG
Error 36 [11] occurred at disk power-on lifetime: 1709 hours (71 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 01 00 00 06 7b 45 b7 e6 00 Error: UNC at LBA = 0x067b45b7 = 108742071
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
20 00 00 00 01 00 00 06 7b 45 b7 e6 08 24d+00:02:29.196 READ SECTOR(S)
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:02:29.195 IDENTIFY DEVICE
20 00 00 00 01 00 00 06 7b 45 b6 e6 08 24d+00:02:20.262 READ SECTOR(S)
ec 00 00 00 01 00 00 00 00 00 00 40 08 24d+00:02:20.261 IDENTIFY DEVICE
30 00 00 00 01 00 00 06 7b 45 b6 e6 08 24d+00:02:17.019 WRITE SECTOR(S)
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2555 -
# 2 Extended offline Completed without error 00% 2553 -
# 3 Extended offline Interrupted (host reset) 30% 2525 -
# 4 Extended offline Completed without error 00% 2505 -
# 5 Extended offline Completed without error 00% 2481 -
# 6 Extended offline Completed without error 00% 2457 -
# 7 Extended offline Completed without error 00% 2433 -
# 8 Extended offline Completed without error 00% 2409 -
# 9 Extended offline Completed without error 00% 2385 -
#10 Extended offline Completed without error 00% 2361 -
#11 Extended offline Completed without error 00% 2337 -
#12 Extended offline Completed without error 00% 2313 -
#13 Extended offline Completed without error 00% 2289 -
#14 Extended offline Completed without error 00% 2265 -
#15 Extended offline Completed without error 00% 2241 -
#16 Extended offline Completed without error 00% 2217 -
#17 Extended offline Completed without error 00% 2193 -
#18 Extended offline Completed without error 00% 2169 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 29/40 Celsius
Lifetime Min/Max Temperature: 22/40 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (152)
Index Estimated Time Temperature Celsius
153 2025-02-02 13:13 33 **************
... ..( 80 skipped). .. **************
234 2025-02-02 14:34 33 **************
235 2025-02-02 14:35 34 ***************
... ..( 5 skipped). .. ***************
241 2025-02-02 14:41 34 ***************
242 2025-02-02 14:42 33 **************
... ..( 9 skipped). .. **************
252 2025-02-02 14:52 33 **************
253 2025-02-02 14:53 32 *************
... ..( 30 skipped). .. *************
284 2025-02-02 15:24 32 *************
285 2025-02-02 15:25 31 ************
... ..( 64 skipped). .. ************
350 2025-02-02 16:30 31 ************
351 2025-02-02 16:31 32 *************
352 2025-02-02 16:32 32 *************
353 2025-02-02 16:33 34 ***************
... ..( 46 skipped). .. ***************
400 2025-02-02 17:20 34 ***************
401 2025-02-02 17:21 33 **************
... ..(228 skipped). .. **************
152 2025-02-02 21:10 33 **************
SCT Error Recovery Control:
Read: 70 (7,0 seconds)
Write: 70 (7,0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 66836 --- Lifetime Power-On Resets
0x01 0x010 4 2555 --- Power-on Hours
0x01 0x018 6 49654551768 --- Logical Sectors Written
0x01 0x020 6 50025451 --- Number of Write Commands
0x01 0x028 6 79892068905 --- Logical Sectors Read
0x01 0x030 6 163392009 --- Number of Read Commands
0x01 0x038 6 608065408 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 2544 --- Spindle Motor Power-on Hours
0x03 0x010 4 2368 --- Head Flying Hours
0x03 0x018 4 66838 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 66133 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 66819 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 43 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 32 --- Current Temperature
0x05 0x010 1 32 --- Average Short Term Temperature
0x05 0x018 1 33 --- Average Long Term Temperature
0x05 0x020 1 40 --- Highest Temperature
0x05 0x028 1 26 --- Lowest Temperature
0x05 0x030 1 37 --- Highest Average Short Term Temperature
0x05 0x038 1 28 --- Lowest Average Short Term Temperature
0x05 0x040 1 33 --- Highest Average Long Term Temperature
0x05 0x048 1 32 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 85855 --- Number of Hardware Resets
0x06 0x010 4 46 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
0xff 0x008 7 0 --- Vendor Specific
0xff 0x010 7 0 --- Vendor Specific
0xff 0x018 7 0 --- Vendor Specific
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 2175102 Vendor specific
More information about the Smartmontools-database
mailing list