[Smartmontools-database] WD Red Plus 8TB WD80EFBX
Peter Manczak
peter.manczak at gmail.com
Tue Feb 27 03:33:54 CET 2024
*WD Red™ Plus - 8TB*
SKU: WD80EFBX
Capacity: 8 TB
Cache Size: 256 MB
Adding a new drive to the database.
I've attached the smartctl output.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20240226/19819464/attachment-0001.htm>
-------------- next part --------------
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.74-Unraid] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD80EFBX-68AZZN0
Serial Number: VR2YXS3K
LU WWN Device Id: 5 000cca 0c3e9c9ad
Firmware Version: 85.00A85
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5577
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Feb 26 21:29:30 2024 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 87) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 849) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 129 129 054 - 104
3 Spin_Up_Time POS--- 158 158 024 - 515 (Average 515)
4 Start_Stop_Count -O--C- 100 100 000 - 319
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 128 128 020 - 18
9 Power_On_Hours -O--C- 099 099 000 - 11469
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 41
192 Power-Off_Retract_Count -O--CK 100 100 000 - 351
193 Load_Cycle_Count -O--C- 100 100 000 - 351
194 Temperature_Celsius -O---- 144 144 000 - 45 (Min/Max 17/49)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x2f GPL R/O 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: 22/45 Celsius
Lifetime Min/Max Temperature: 17/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (71)
Index Estimated Time Temperature Celsius
72 2024-02-26 19:22 21 **
... ..( 71 skipped). .. **
16 2024-02-26 20:34 21 **
17 2024-02-26 20:35 22 ***
18 2024-02-26 20:36 23 ****
19 2024-02-26 20:37 23 ****
20 2024-02-26 20:38 24 *****
21 2024-02-26 20:39 25 ******
22 2024-02-26 20:40 25 ******
23 2024-02-26 20:41 27 ********
24 2024-02-26 20:42 28 *********
25 2024-02-26 20:43 29 **********
26 2024-02-26 20:44 30 ***********
27 2024-02-26 20:45 31 ************
28 2024-02-26 20:46 32 *************
29 2024-02-26 20:47 32 *************
30 2024-02-26 20:48 33 **************
31 2024-02-26 20:49 34 ***************
32 2024-02-26 20:50 35 ****************
33 2024-02-26 20:51 36 *****************
34 2024-02-26 20:52 36 *****************
35 2024-02-26 20:53 37 ******************
... ..( 2 skipped). .. ******************
38 2024-02-26 20:56 37 ******************
39 2024-02-26 20:57 38 *******************
40 2024-02-26 20:58 38 *******************
41 2024-02-26 20:59 39 ********************
42 2024-02-26 21:00 39 ********************
43 2024-02-26 21:01 39 ********************
44 2024-02-26 21:02 40 *********************
45 2024-02-26 21:03 40 *********************
46 2024-02-26 21:04 40 *********************
47 2024-02-26 21:05 41 **********************
... ..( 2 skipped). .. **********************
50 2024-02-26 21:08 41 **********************
51 2024-02-26 21:09 42 ***********************
52 2024-02-26 21:10 42 ***********************
53 2024-02-26 21:11 42 ***********************
54 2024-02-26 21:12 43 ************************
55 2024-02-26 21:13 43 ************************
56 2024-02-26 21:14 44 *************************
... ..( 2 skipped). .. *************************
59 2024-02-26 21:17 44 *************************
60 2024-02-26 21:18 45 **************************
... ..( 7 skipped). .. **************************
68 2024-02-26 21:26 45 **************************
69 2024-02-26 21:27 46 ***************************
70 2024-02-26 21:28 46 ***************************
71 2024-02-26 21:29 21 **
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 41 --- Lifetime Power-On Resets
0x01 0x010 4 11469 --- Power-on Hours
0x01 0x018 6 31071098040 --- Logical Sectors Written
0x01 0x020 6 38356215 --- Number of Write Commands
0x01 0x028 6 365503016742 --- Logical Sectors Read
0x01 0x030 6 383409007 --- Number of Read Commands
0x01 0x038 6 41288539050 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 963 --- Spindle Motor Power-on Hours
0x03 0x010 4 963 --- Head Flying Hours
0x03 0x018 4 351 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 45 --- Current Temperature
0x05 0x010 1 23 N-- Average Short Term Temperature
0x05 0x018 1 21 N-- Average Long Term Temperature
0x05 0x020 1 49 --- Highest Temperature
0x05 0x028 1 17 --- Lowest Temperature
0x05 0x030 1 47 N-- Highest Average Short Term Temperature
0x05 0x038 1 18 N-- Lowest Average Short Term Temperature
0x05 0x040 1 43 N-- Highest Average Long Term Temperature
0x05 0x048 1 19 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 96 --- Number of Hardware Resets
0x06 0x010 4 18 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
0xff 0x040 7 1712 --- Vendor Specific
0xff 0x048 7 20 --- Vendor Specific
0xff 0x050 7 0 --- Vendor Specific
0xff 0x058 7 0 --- Vendor Specific
0xff 0x060 7 0 --- Vendor Specific
0xff 0x068 7 0 --- Vendor Specific
0xff 0x070 7 0 --- Vendor Specific
0xff 0x078 7 0 --- Vendor Specific
0xff 0x080 7 0 --- Vendor Specific
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list