[Smartmontools-database] New Device - BAITITON_MSATA_512GB_SSD
steffen.ang at gmx.de
steffen.ang at gmx.de
Wed Nov 29 17:37:15 CET 2023
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20231129/91c45f52/attachment.htm>
-------------- next part --------------
smartctl 7.2 2021-09-14 r5237 [x86_64-linux-5.14.21-150500.55.36-default] (SUSE RPM)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: BT58SSD12M
Firmware Version: HP28182P
User Capacity: 512.110.190.592 bytes [512 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Nov 29 17:18:18 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 42) seconds.
Offline data collection
capabilities: (0x5d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 2164
12 Power_Cycle_Count -O--CK 100 100 050 - 12
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute -O--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 72
164 Unknown_Attribute -O--CK 100 100 050 - 103
165 Unknown_Attribute -O--CK 100 100 050 - 143
166 Unknown_Attribute -O--CK 100 100 050 - 1
167 Unknown_Attribute -O--CK 100 100 050 - 33
168 Unknown_Attribute -O--CK 100 100 050 - 0
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 117727
177 Wear_Leveling_Count -O--CK 100 100 050 - 34141680
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 1
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 10
194 Temperature_Celsius -O--CK 100 100 050 - 40
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written -O--CK 100 100 050 - 65470
242 Total_LBAs_Read -O--CK 100 100 050 - 9456
245 Unknown_Attribute -O--CK 100 100 050 - 163409
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 932 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 932 [3] occurred at disk power-on lifetime: 166 hours (6 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- e0 00 08 00 00 b6 00 fa 00 51 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
50 00 00 00 08 00 00 b6 00 fa 00 e0 ff 15d+15:51:33.850 FORMAT TRACK [OBS-4]
Error 931 [2] occurred at disk power-on lifetime: 166 hours (6 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- e0 00 08 00 00 b6 00 fa 00 51 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
50 00 00 00 08 00 00 b6 00 fa 00 e0 ff 12d+15:51:52.800 FORMAT TRACK [OBS-4]
Error 930 [1] occurred at disk power-on lifetime: 166 hours (6 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- e0 00 08 00 00 af 00 fd e0 51 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
50 00 00 00 08 00 00 af 00 fd e0 e0 ff 11d+15:51:58.870 FORMAT TRACK [OBS-4]
Error 929 [0] occurred at disk power-on lifetime: 166 hours (6 days + 22 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- e0 00 08 00 00 af 00 fd e0 51 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
50 00 00 00 08 00 00 af 00 fd e0 e0 ff 10d+15:52:08.010 FORMAT TRACK [OBS-4]
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Completed without error 00% 2137 -
# 2 Offline Self-test routine in progress 10% 2137 -
# 3 Offline Self-test routine in progress 10% 2137 -
# 4 Offline Self-test routine in progress 10% 2137 -
# 5 Offline Self-test routine in progress 10% 2137 -
# 6 Offline Self-test routine in progress 10% 2137 -
# 7 Offline Self-test routine in progress 10% 2137 -
# 8 Offline Self-test routine in progress 10% 2137 -
# 9 Offline Self-test routine in progress 10% 2137 -
#10 Offline Self-test routine in progress 10% 2137 -
#11 Offline Self-test routine in progress 10% 2137 -
#12 Offline Self-test routine in progress 10% 2137 -
#13 Offline Self-test routine in progress 10% 2137 -
#14 Offline Self-test routine in progress 10% 2137 -
#15 Offline Self-test routine in progress 10% 2137 -
#16 Offline Self-test routine in progress 10% 2137 -
#17 Offline Self-test routine in progress 10% 2137 -
#18 Offline Self-test routine in progress 10% 2137 -
#19 Offline Self-test routine in progress 10% 2137 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 12 --- Lifetime Power-On Resets
0x01 0x010 4 2164 --- Power-on Hours
0x01 0x018 6 4290641920 --- Logical Sectors Written
0x01 0x020 6 102922196 --- Number of Write Commands
0x01 0x028 6 619708416 --- Logical Sectors Read
0x01 0x030 6 4602346 --- Number of Read Commands
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0009 4 27 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 687 Device-to-host register FISes sent due to a COMRESET
0x000b 4 251 CRC errors within host-to-device FIS
0x000d 4 251 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list