[Smartmontools-database] Patriot Burst Elite 120GB
Simonas Kapučinskas
simonas.kapucinskas at gmail.com
Tue Jan 24 13:12:09 CET 2023
Hello.
Please consider to add Patriot Burst Elite 120GB to the drive database.
It uses SMI SM2259XT controller.
Current models are 120GB, 240GB, 480GB, 960GB and 1.92TB.
The drive should fit right into the "Silicon Motion based SSDs" group.
Patriot SSD toolbox shows these SMART attributes:
01 / 1 Read Error Rate
05 / 5 Reallocated Sectors Count
09 / 9 Power On Hours
0C / 12 Power Cycle Count
A0 / 160 Uncorrectable Sector Count On Line
A1 / 161 Number of Pure Spare
A3 / 163 Number of Initial Invalid Block
A4 / 164 Total Erase Count
A5 / 165 Max Erase Count
A6 / 166 Min Erase Count
A7 / 167 Average Erase Count
A8 / 168 Max Erase Count in Spec
A9 / 169 Remain Life Percentage
AF / 175 Worst Die Program Fail Count
B0 / 176 Worst Die Erase Fail Count
B1 / 177 WearLeveling Count
B2 / 178 Used Reserved Block Count
B5 / 181 Program Fail Count
B6 / 182 Erase Fail Count
C0 / 192 Unexpected Power Loss Count
C2 / 194 Temperature
C3 / 195 Hardware ECC Recovered
C4 / 196 Reallocation Event Count
C5 / 197 Current Pending Sector Count
C6 / 198 Uncorrectable Sector Count Off Line
C7 / 199 Ultra DMA CRC error count
E8 / 232 Available Reserved Space
F1 / 241 Write Sector Count
F2 / 242 Read Sector Count
F3 / 245 Flash Write Count
Regards
Simon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20230124/d07f8f3f/attachment-0001.htm>
-------------- next part --------------
smartctl 7.3 2022-02-28 r5338 [x86_64-w64-mingw32-w10-b19045] (sf-7.3-1)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Patriot Burst Elite 120GB
Firmware Version: HCS1C16F
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5417
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jan 24 00:22:15 2023 FLE
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 18) seconds.
Offline data collection
capabilities: (0x5d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 2160
12 Power_Cycle_Count -O--CK 100 100 050 - 212
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute -O--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 116
164 Unknown_Attribute -O--CK 100 100 050 - 50
165 Unknown_Attribute -O--CK 100 100 050 - 113
166 Unknown_Attribute -O--CK 100 100 050 - 3
167 Unknown_Attribute -O--CK 100 100 050 - 45
168 Unknown_Attribute -O--CK 100 100 050 - 0
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 167335
177 Wear_Leveling_Count -O--CK 100 100 050 - 1515544
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 7
194 Temperature_Celsius -O--CK 100 100 050 - 30
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 159744
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written -O--CK 100 100 050 - 45583
242 Total_LBAs_Read -O--CK 100 100 050 - 71373
245 Unknown_Attribute -O--CK 100 100 050 - 123053
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 5 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 40 00 00 00 01 42 00 c8 00 00 00 at LBA = 0x14200c800 = 5402314752
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 01 42 00 c8 00 40 00 00:04:31.030 READ FPDMA QUEUED
60 01 00 00 00 00 02 ac 00 68 00 40 00 00:04:31.030 READ FPDMA QUEUED
60 01 00 00 00 00 00 e7 00 63 00 40 00 00:04:31.020 READ FPDMA QUEUED
60 01 00 00 00 00 00 0f 00 80 00 40 00 00:04:31.020 READ FPDMA QUEUED
60 01 00 00 00 00 01 47 00 aa 00 40 00 00:04:31.020 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 40 00 00 00 06 af 00 a5 00 00 00 at LBA = 0x6af00a500 = 28705858816
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 00 00 06 af 00 a5 00 40 00 00:04:18.830 READ FPDMA QUEUED
60 01 00 00 00 00 06 ad 00 a5 00 40 00 00:04:18.820 READ FPDMA QUEUED
60 01 00 00 00 00 06 ac 00 a5 00 40 00 00:04:18.820 READ FPDMA QUEUED
60 01 00 00 00 00 06 a7 00 a5 00 40 00 00:04:18.820 READ FPDMA QUEUED
60 01 00 00 00 00 06 a6 00 a5 00 40 00 00:04:18.810 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 40 00 00 00 06 e8 00 a6 40 00 00 at LBA = 0x6e800a640 = 29662160448
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 00 00 06 e8 00 a6 40 40 00 00:03:54.310 WRITE FPDMA QUEUED
61 00 08 00 00 00 06 e8 00 a6 30 40 00 00:03:54.310 WRITE FPDMA QUEUED
61 00 10 00 00 00 06 e8 00 a6 18 40 00 00:03:54.310 WRITE FPDMA QUEUED
61 00 10 00 00 00 06 e8 00 a6 00 40 00 00:03:54.310 WRITE FPDMA QUEUED
61 00 08 00 00 00 06 e7 00 a6 f0 40 00 00:03:54.310 WRITE FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 40 00 00 00 00 b3 00 63 80 00 00 at LBA = 0xb3006380 = 3003147136
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 00 00 00 b3 00 63 80 40 00 00:01:35.560 READ FPDMA QUEUED
60 00 3b 00 00 00 00 a1 00 d4 20 40 00 00:01:35.560 READ FPDMA QUEUED
60 00 8b 00 00 00 00 a0 00 d4 d0 40 00 00:01:35.560 READ FPDMA QUEUED
60 00 08 00 00 00 06 85 00 a1 78 40 00 00:01:35.560 READ FPDMA QUEUED
60 00 19 00 00 00 01 d5 00 5f e8 40 00 00:01:35.550 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Completed without error 00% 2160 -
# 2 Offline Self-test routine in progress 10% 2160 -
# 3 Offline Self-test routine in progress 10% 2160 -
# 4 Offline Self-test routine in progress 10% 2160 -
# 5 Offline Self-test routine in progress 10% 2160 -
# 6 Offline Self-test routine in progress 10% 2160 -
# 7 Offline Self-test routine in progress 10% 2160 -
# 8 Offline Self-test routine in progress 10% 2160 -
# 9 Offline Self-test routine in progress 10% 2160 -
#10 Offline Self-test routine in progress 10% 2160 -
#11 Offline Self-test routine in progress 10% 2160 -
#12 Offline Self-test routine in progress 10% 2160 -
#13 Offline Self-test routine in progress 10% 2160 -
#14 Offline Self-test routine in progress 10% 2160 -
#15 Offline Self-test routine in progress 10% 2160 -
#16 Offline Self-test routine in progress 10% 2160 -
#17 Offline Self-test routine in progress 10% 2160 -
#18 Offline Self-test routine in progress 10% 2160 -
#19 Offline Self-test routine in progress 10% 2160 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 212 --- Lifetime Power-On Resets
0x01 0x010 4 2160 --- Power-on Hours
0x01 0x018 6 2987327488 --- Logical Sectors Written
0x01 0x020 6 55091745 --- Number of Write Commands
0x01 0x028 6 4677500928 --- Logical Sectors Read
0x01 0x030 6 71187849 --- Number of Read Commands
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0009 4 225 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 260 Device-to-host register FISes sent due to a COMRESET
0x000b 4 11 CRC errors within host-to-device FIS
0x000d 4 9 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list