[Smartmontools-database] TOSHIBA HDWG460UZSVB
Henric Jungheim
software at henric.org
Fri Feb 3 16:14:45 CET 2023
Attached.
-------------- next part --------------
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA HDWG460UZSVB
Firmware Version: 0101
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5440
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 3 08:07:32 2023 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 529) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 10637
4 Start_Stop_Count -O--CK 100 100 000 - 1
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 089 089 000 - 4656
10 Spin_Retry_Count PO--CK 100 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1
191 G-Sense_Error_Rate -O--CK 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 100 100 000 - 0
193 Load_Cycle_Count -O--CK 100 100 000 - 1
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 19/45)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 16777218
222 Loaded_Hours -O--CK 089 089 000 - 4656
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 514
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 513 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 53248 Current Device Internal Status Data log
0x25 GPL R/O 53248 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xae GPL VS 25 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4656 -
# 2 Extended offline Interrupted (host reset) 40% 4654 -
# 3 Short offline Completed without error 00% 4649 -
# 4 Short offline Completed without error 00% 4625 -
# 5 Short offline Completed without error 00% 4601 -
# 6 Short offline Completed without error 00% 4577 -
# 7 Short offline Completed without error 00% 4553 -
# 8 Short offline Completed without error 00% 4529 -
# 9 Short offline Completed without error 00% 4505 -
#10 Extended offline Completed without error 00% 4491 -
#11 Short offline Completed without error 00% 4481 -
#12 Short offline Completed without error 00% 4457 -
#13 Short offline Completed without error 00% 4433 -
#14 Short offline Completed without error 00% 4409 -
#15 Short offline Completed without error 00% 4385 -
#16 Short offline Completed without error 00% 4361 -
#17 Short offline Completed without error 00% 4337 -
#18 Extended offline Completed without error 00% 4323 -
#19 Short offline Completed without error 00% 4313 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 19/45 Celsius
Lifetime Min/Max Temperature: 19/45 Celsius
Specified Max Operating Temperature: 55 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 478 (242)
Index Estimated Time Temperature Celsius
243 2023-02-03 00:10 29 **********
... ..( 73 skipped). .. **********
317 2023-02-03 01:24 29 **********
318 2023-02-03 01:25 30 ***********
... ..( 6 skipped). .. ***********
325 2023-02-03 01:32 30 ***********
326 2023-02-03 01:33 29 **********
327 2023-02-03 01:34 30 ***********
... ..( 5 skipped). .. ***********
333 2023-02-03 01:40 30 ***********
334 2023-02-03 01:41 29 **********
335 2023-02-03 01:42 29 **********
336 2023-02-03 01:43 30 ***********
337 2023-02-03 01:44 30 ***********
338 2023-02-03 01:45 29 **********
339 2023-02-03 01:46 30 ***********
... ..( 2 skipped). .. ***********
342 2023-02-03 01:49 30 ***********
343 2023-02-03 01:50 29 **********
344 2023-02-03 01:51 30 ***********
345 2023-02-03 01:52 29 **********
346 2023-02-03 01:53 30 ***********
... ..( 2 skipped). .. ***********
349 2023-02-03 01:56 30 ***********
350 2023-02-03 01:57 29 **********
... ..( 26 skipped). .. **********
377 2023-02-03 02:24 29 **********
378 2023-02-03 02:25 30 ***********
... ..( 3 skipped). .. ***********
382 2023-02-03 02:29 30 ***********
383 2023-02-03 02:30 31 ************
... ..( 6 skipped). .. ************
390 2023-02-03 02:37 31 ************
391 2023-02-03 02:38 32 *************
... ..( 7 skipped). .. *************
399 2023-02-03 02:46 32 *************
400 2023-02-03 02:47 33 **************
... ..(153 skipped). .. **************
76 2023-02-03 05:21 33 **************
77 2023-02-03 05:22 32 *************
78 2023-02-03 05:23 33 **************
... ..( 5 skipped). .. **************
84 2023-02-03 05:29 33 **************
85 2023-02-03 05:30 32 *************
86 2023-02-03 05:31 33 **************
87 2023-02-03 05:32 32 *************
... ..( 2 skipped). .. *************
90 2023-02-03 05:35 32 *************
91 2023-02-03 05:36 33 **************
92 2023-02-03 05:37 32 *************
... ..( 47 skipped). .. *************
140 2023-02-03 06:25 32 *************
141 2023-02-03 06:26 33 **************
... ..( 20 skipped). .. **************
162 2023-02-03 06:47 33 **************
163 2023-02-03 06:48 34 ***************
... ..( 19 skipped). .. ***************
183 2023-02-03 07:08 34 ***************
184 2023-02-03 07:09 33 **************
... ..( 14 skipped). .. **************
199 2023-02-03 07:24 33 **************
200 2023-02-03 07:25 32 *************
201 2023-02-03 07:26 33 **************
202 2023-02-03 07:27 32 *************
203 2023-02-03 07:28 33 **************
204 2023-02-03 07:29 32 *************
205 2023-02-03 07:30 32 *************
206 2023-02-03 07:31 33 **************
207 2023-02-03 07:32 32 *************
... ..( 2 skipped). .. *************
210 2023-02-03 07:35 32 *************
211 2023-02-03 07:36 33 **************
212 2023-02-03 07:37 32 *************
213 2023-02-03 07:38 33 **************
... ..( 25 skipped). .. **************
239 2023-02-03 08:04 33 **************
240 2023-02-03 08:05 34 ***************
241 2023-02-03 08:06 34 ***************
242 2023-02-03 08:07 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 3) ==
0x01 0x008 4 1 --- Lifetime Power-On Resets
0x01 0x010 4 4656 --- Power-on Hours
0x01 0x018 6 5990862080 --- Logical Sectors Written
0x01 0x020 6 74101608 --- Number of Write Commands
0x01 0x028 6 47900446876 --- Logical Sectors Read
0x01 0x030 6 150220010 --- Number of Read Commands
0x01 0x038 6 16761600000 --- Date and Time TimeStamp
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 2 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 1076 --- Spindle Motor Power-on Hours
0x03 0x010 4 1076 --- Head Flying Hours
0x03 0x018 4 1 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 0 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 30 N-- Average Short Term Temperature
0x05 0x018 1 28 N-- Average Long Term Temperature
0x05 0x020 1 45 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x030 1 42 N-- Highest Average Short Term Temperature
0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
0x05 0x040 1 36 N-- Highest Average Long Term Temperature
0x05 0x048 1 26 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 37 --- Number of Hardware Resets
0x06 0x010 4 19 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 37 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 37 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list