[Smartmontools-database] LITEONIT LCS-128L9S-11 2.5 7mm 128GB
Sinapse Redes - David
david at sinapseredes.com.br
Fri Dec 29 18:03:29 CET 2023
--
David Marques Neves
.--.
|o_o |
|:_/ |
// \ \
(| | )
/'\_ _/`\
\___)=(___/
(https://sinapseredes.com.br)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20231229/2046fd3d/attachment.htm>
-------------- next part --------------
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-16-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEONIT LCS-128L9S-11 2.5 7mm 128GB
Serial Number: TW0XRV8D5508543Q2102
Firmware Version: HC7110E
User Capacity: 128.035.676.160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: Not in smartctl database 7.3/5563
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Dec 29 13:58:48 2023 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 2961
12 Power_Cycle_Count PO---- 100 100 000 - 1759
175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
177 Wear_Leveling_Count PO---- 100 100 000 - 239302
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 005 - 912
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
187 Reported_Uncorrect PO---- 100 100 000 - 0
195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
241 Total_LBAs_Written PO---- 100 100 000 - 352037
242 Total_LBAs_Read PO---- 100 100 000 - 301673
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 0
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 2 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 1 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 0
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2961 -
# 2 Short offline Completed without error 00% 2961 -
# 3 Extended offline Completed without error 00% 2956 -
# 4 Extended offline Completed without error 00% 2937 -
# 5 Extended offline Completed without error 00% 2918 -
# 6 Extended offline Completed without error 00% 2900 -
# 7 Extended offline Completed without error 00% 2882 -
# 8 Extended offline Completed without error 00% 2864 -
# 9 Extended offline Completed without error 00% 2846 -
#10 Extended offline Completed without error 00% 2822 -
#11 Extended offline Completed without error 00% 2802 -
#12 Extended offline Completed without error 00% 2783 -
#13 Extended offline Completed without error 00% 2764 -
#14 Extended offline Completed without error 00% 2746 -
#15 Extended offline Completed without error 00% 2730 -
#16 Extended offline Completed without error 00% 2718 -
#17 Extended offline Completed without error 00% 2707 -
#18 Extended offline Completed without error 00% 2697 -
#19 Extended offline Completed without error 00% 2687 -
Selective Self-tests/Logging not supported
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (0)
Index Estimated Time Temperature Celsius
1 2023-12-29 11:51 ? -
... ..(126 skipped). .. -
0 2023-12-29 13:58 ? -
SCT Error Recovery Control:
Read: 2 (0,2 seconds)
Write: 2 (0,2 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 30 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list