[Smartmontools-database] MB010000GWAYN
chris fredette
s3r3nity at gmail.com
Thu Sep 8 19:20:10 CEST 2022
-------------- next part --------------
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.3-Unraid] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MB010000GWAYN
Firmware Version: HPG3
User Capacity: 10,000,831,348,736 bytes [10.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5405
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 8 13:01:13 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 93) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1139) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 016 - 0
2 Throughput_Performance POS--K 134 100 054 - 96
3 Spin_Up_Time PO---K 149 100 024 - 450 (Average 430)
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate POSR-K 100 100 067 - 0
8 Seek_Time_Performance P-S--K 128 100 020 - 18
9 Power_On_Hours -O--CK 096 096 000 - 31249
10 Spin_Retry_Count PO--CK 100 100 060 - 0
22 Unknown_Attribute PO---K 100 100 025 - 100
169 Unknown_Attribute PO--CK 100 100 099 - 0
180 Unknown_HDD_Attribute PO-R-K 100 100 098 - 0
194 Temperature_Celsius -O---K 193 117 000 - 31 (Min/Max 16/51)
196 Reallocated_Event_Count PO--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x0d GPL R/O 7 LPS Mis-alignment log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x16 GPL R/W 1 Out Of Band Management Control log
0x17 GPL - 1 Reserved for Serial ATA
0x30 GPL R/O 9 IDENTIFY DEVICE data log
0x80 GPL R/W 16 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xb5 SL VS 1 Device vendor specific log
0xb6 GPL VS 127 Device vendor specific log
0xd0 GPL VS 1 Device vendor specific log
0xd7 GPL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 28 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 28 [3] occurred at disk power-on lifetime: 31247 hours (1301 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 53 00 07 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c2 00 01 00 00 00 00 00 00 40 08 3d+22:26:40.580 DEVICE CONFIGURATION IDENTIFY [OBS-ACS-3]
60 05 40 00 00 00 00 04 e4 f3 88 40 08 3d+22:26:40.542 READ FPDMA QUEUED
60 00 80 00 58 00 00 04 e4 f8 c8 40 08 3d+22:26:40.542 READ FPDMA QUEUED
60 05 40 00 50 00 00 04 e4 ee 48 40 08 3d+22:26:40.542 READ FPDMA QUEUED
60 05 40 00 f8 00 00 04 e4 e9 08 40 08 3d+22:26:40.542 READ FPDMA QUEUED
Error 27 [2] occurred at disk power-on lifetime: 31247 hours (1301 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 53 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
27 00 00 00 00 00 00 00 00 00 00 40 08 3d+22:26:40.510 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
60 05 40 00 b0 00 00 04 e4 d4 08 40 08 3d+22:26:40.484 READ FPDMA QUEUED
60 05 40 00 a8 00 00 04 e4 ce c8 40 08 3d+22:26:40.484 READ FPDMA QUEUED
ec 00 00 00 01 00 00 00 00 00 00 40 08 3d+22:26:40.484 IDENTIFY DEVICE
60 01 b0 00 10 00 00 04 e4 cd 18 40 08 3d+22:26:40.472 READ FPDMA QUEUED
Error 26 [1] occurred at disk power-on lifetime: 31212 hours (1300 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 53 00 07 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c2 00 01 00 00 00 00 00 00 40 08 2d+11:24:42.784 DEVICE CONFIGURATION IDENTIFY [OBS-ACS-3]
60 00 80 00 58 00 00 08 35 6f b8 40 08 2d+11:24:42.758 READ FPDMA QUEUED
60 05 40 00 50 00 00 08 35 6a 78 40 08 2d+11:24:42.758 READ FPDMA QUEUED
60 05 40 00 28 00 00 08 35 65 38 40 08 2d+11:24:42.758 READ FPDMA QUEUED
60 05 40 00 48 00 00 08 35 5f f8 40 08 2d+11:24:42.758 READ FPDMA QUEUED
Error 25 [0] occurred at disk power-on lifetime: 31212 hours (1300 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 53 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
27 00 00 00 00 00 00 00 00 00 00 40 08 2d+11:24:42.742 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 01 00 00 00 00 00 00 40 08 2d+11:24:42.651 IDENTIFY DEVICE
60 00 80 00 18 00 00 08 35 4f b8 40 08 2d+11:24:42.642 READ FPDMA QUEUED
60 05 40 00 10 00 00 08 35 4a 78 40 08 2d+11:24:42.636 READ FPDMA QUEUED
60 05 40 00 08 00 00 08 35 45 38 40 08 2d+11:24:42.630 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 31092 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 28/33 Celsius
Lifetime Min/Max Temperature: 16/51 Celsius
Specified Max Operating Temperature: 60 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (22)
Index Estimated Time Temperature Celsius
23 2022-09-08 10:54 30 ***********
... ..( 13 skipped). .. ***********
37 2022-09-08 11:08 30 ***********
38 2022-09-08 11:09 31 ************
... ..( 4 skipped). .. ************
43 2022-09-08 11:14 31 ************
44 2022-09-08 11:15 30 ***********
... ..( 53 skipped). .. ***********
98 2022-09-08 12:09 30 ***********
99 2022-09-08 12:10 31 ************
... ..( 12 skipped). .. ************
112 2022-09-08 12:23 31 ************
113 2022-09-08 12:24 30 ***********
... ..( 18 skipped). .. ***********
4 2022-09-08 12:43 30 ***********
5 2022-09-08 12:44 31 ************
... ..( 15 skipped). .. ************
21 2022-09-08 13:00 31 ************
22 2022-09-08 13:01 30 ***********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 19 --- Lifetime Power-On Resets
0x01 0x010 4 31249 --- Power-on Hours
0x01 0x018 6 454857149427 --- Logical Sectors Written
0x01 0x020 6 2524552367 --- Number of Write Commands
0x01 0x028 6 1874371660354 --- Logical Sectors Read
0x01 0x030 6 3554300366 --- Number of Read Commands
0x01 0x038 6 112497960750 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 31208 --- Spindle Motor Power-on Hours
0x03 0x010 4 31208 --- Head Flying Hours
0x03 0x018 4 1298 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 355786 --- Read Recovery Attempts
0x03 0x030 4 1 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 --- Current Temperature
0x05 0x010 1 31 N-- Average Short Term Temperature
0x05 0x018 1 30 N-- Average Long Term Temperature
0x05 0x020 1 51 --- Highest Temperature
0x05 0x028 1 16 --- Lowest Temperature
0x05 0x030 1 50 N-- Highest Average Short Term Temperature
0x05 0x038 1 22 N-- Lowest Average Short Term Temperature
0x05 0x040 1 32 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1 --- Number of Hardware Resets
0x06 0x010 4 56 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list