[Smartmontools-database] WDC WD200EDGZ-11BLDS0 (shucked from a 20TB WD Elements)
Jody Belka
j.smartmontools at knewt.uk
Sat Oct 15 23:46:11 CEST 2022
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://listi.jpberlin.de/pipermail/smartmontools-database/attachments/20221015/a1cc90a0/attachment-0001.htm>
-------------- next part --------------
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-18-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD200EDGZ-11BLDS0
Firmware Version: 85.00A85
User Capacity: 20,000,588,955,648 bytes [20.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-5 (minor revision not indicated)
SATA Version is: SATA >3.3 (10), 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Oct 15 21:16:20 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (2131) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
2 Throughput_Performance --S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 095 095 001 - 0 (Average 253)
4 Start_Stop_Count -O--C- 100 100 000 - 6
5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
7 Seek_Error_Rate -O-R-- 100 100 001 - 0
8 Seek_Time_Performance --S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 2
10 Spin_Retry_Count -O--C- 100 100 001 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 6
22 Unknown_Attribute PO---K 100 100 025 - 6553700
90 Unknown_Attribute P---CK 100 100 001 - 304942678016
192 Power-Off_Retract_Count -O--CK 100 100 000 - 7
193 Load_Cycle_Count -O--C- 100 100 000 - 7
194 Temperature_Celsius -O---- 048 048 000 - 35 (Min/Max 20/35)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 17579 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x2f GPL - 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb7 SL VS 1 Device vendor specific log
0xd8-0xd9 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 20/35 Celsius
Lifetime Min/Max Temperature: 20/35 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
Minimum supported ERC Time Limit: 65 (6.5 seconds)
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (3)
Index Estimated Time Temperature Celsius
4 2022-10-15 19:09 20 *
5 2022-10-15 19:10 20 *
6 2022-10-15 19:11 21 **
7 2022-10-15 19:12 21 **
8 2022-10-15 19:13 22 ***
9 2022-10-15 19:14 23 ****
10 2022-10-15 19:15 23 ****
11 2022-10-15 19:16 24 *****
12 2022-10-15 19:17 25 ******
13 2022-10-15 19:18 25 ******
14 2022-10-15 19:19 26 *******
15 2022-10-15 19:20 26 *******
16 2022-10-15 19:21 27 ********
17 2022-10-15 19:22 27 ********
18 2022-10-15 19:23 28 *********
... ..( 2 skipped). .. *********
21 2022-10-15 19:26 28 *********
22 2022-10-15 19:27 29 **********
... ..( 7 skipped). .. **********
30 2022-10-15 19:35 29 **********
31 2022-10-15 19:36 30 ***********
... ..( 11 skipped). .. ***********
43 2022-10-15 19:48 30 ***********
44 2022-10-15 19:49 31 ************
... ..( 3 skipped). .. ************
48 2022-10-15 19:53 31 ************
49 2022-10-15 19:54 32 *************
... ..( 7 skipped). .. *************
57 2022-10-15 20:02 32 *************
58 2022-10-15 20:03 33 **************
... ..( 12 skipped). .. **************
71 2022-10-15 20:16 33 **************
72 2022-10-15 20:17 34 ***************
73 2022-10-15 20:18 33 **************
74 2022-10-15 20:19 34 ***************
... ..( 23 skipped). .. ***************
98 2022-10-15 20:43 34 ***************
99 2022-10-15 20:44 35 ****************
... ..( 8 skipped). .. ****************
108 2022-10-15 20:53 35 ****************
109 2022-10-15 20:54 34 ***************
110 2022-10-15 20:55 35 ****************
... ..( 19 skipped). .. ****************
2 2022-10-15 21:15 35 ****************
3 2022-10-15 21:16 20 *
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 6 --- Lifetime Power-On Resets
0x01 0x010 4 2 --- Power-on Hours
0x01 0x018 6 3239584 --- Logical Sectors Written
0x01 0x020 6 51397 --- Number of Write Commands
0x01 0x028 6 779664 --- Logical Sectors Read
0x01 0x030 6 5053 --- Number of Read Commands
0x01 0x038 6 7537700 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 1 --- Spindle Motor Power-on Hours
0x03 0x010 4 1 --- Head Flying Hours
0x03 0x018 4 7 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 35 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x04 0x018 4 0 --- Physical Element Status Changed
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 35 --- Current Temperature
0x05 0x010 1 - N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 35 --- Highest Temperature
0x05 0x028 1 20 --- Lowest Temperature
0x05 0x030 1 - N-- Highest Average Short Term Temperature
0x05 0x038 1 - N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 10 --- Number of Hardware Resets
0x06 0x010 4 1 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
No Defects Logged
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
More information about the Smartmontools-database
mailing list