[Smartmontools-database] HP SSD S600 drive
Legs
legds at narod.ru
Mon Mar 7 23:05:31 CET 2022
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-100-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HP SSD S600 240GB
Serial Number: HBSA21150601549
LU WWN Device Id: 5 000000 000002913
Firmware Version: SN8108
User Capacity: 240 057 409 536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0bf8) (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 8 00:57:25 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 20
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 2
12 Power_Cycle_Count -O--C- 100 100 000 - 15
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 0
169 Unknown_Attribute PO--C- 100 100 010 - 0
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
173 Unknown_Attribute -O--C- 200 200 000 - 8590262276
174 Unknown_Attribute -O---K 100 100 000 - 0
175 Program_Fail_Count_Chip -O---K 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 260
187 Reported_Uncorrect -O--CK 100 000 000 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 10
194 Temperature_Celsius -O---K 027 027 000 - 27 (Min/Max 26/32)
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 2
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 5
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 4
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1
210 Unknown_Attribute -O--CK 200 200 000 - 11
211 Unknown_Attribute -O--CK 200 200 000 - 3
231 Unknown_SSD_Attribute PO---K 100 100 005 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 467
242 Total_LBAs_Read -O--CK 100 100 000 - 133
243 Unknown_Attribute -O--CK 050 050 000 - 57082727
245 Unknown_Attribute -O--CK 100 100 000 - 26
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: ?/30 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (101)
Index Estimated Time Temperature Celsius
102 2022-03-07 17:00 ? -
... ..(381 skipped). .. -
6 2022-03-07 23:22 ? -
7 2022-03-07 23:23 29 **********
8 2022-03-07 23:24 29 **********
9 2022-03-07 23:25 ? -
... ..( 5 skipped). .. -
15 2022-03-07 23:31 ? -
16 2022-03-07 23:32 30 ***********
17 2022-03-07 23:33 ? -
... ..( 5 skipped). .. -
23 2022-03-07 23:39 ? -
24 2022-03-07 23:40 30 ***********
25 2022-03-07 23:41 ? -
... ..( 7 skipped). .. -
33 2022-03-07 23:49 ? -
34 2022-03-07 23:50 30 ***********
35 2022-03-07 23:51 ? -
36 2022-03-07 23:52 ? -
37 2022-03-07 23:53 ? -
38 2022-03-07 23:54 30 ***********
39 2022-03-07 23:55 30 ***********
40 2022-03-07 23:56 ? -
... ..( 14 skipped). .. -
55 2022-03-08 00:11 ? -
56 2022-03-08 00:12 30 ***********
57 2022-03-08 00:13 31 ************
58 2022-03-08 00:14 29 **********
59 2022-03-08 00:15 29 **********
60 2022-03-08 00:16 ? -
61 2022-03-08 00:17 29 **********
62 2022-03-08 00:18 ? -
... ..( 7 skipped). .. -
70 2022-03-08 00:26 ? -
71 2022-03-08 00:27 29 **********
... ..( 2 skipped). .. **********
74 2022-03-08 00:30 29 **********
75 2022-03-08 00:31 ? -
76 2022-03-08 00:32 ? -
77 2022-03-08 00:33 ? -
78 2022-03-08 00:34 29 **********
79 2022-03-08 00:35 ? -
80 2022-03-08 00:36 ? -
81 2022-03-08 00:37 30 ***********
82 2022-03-08 00:38 29 **********
... ..( 2 skipped). .. **********
85 2022-03-08 00:41 29 **********
86 2022-03-08 00:42 ? -
... ..( 2 skipped). .. -
89 2022-03-08 00:45 ? -
90 2022-03-08 00:46 27 ********
91 2022-03-08 00:47 ? -
92 2022-03-08 00:48 ? -
93 2022-03-08 00:49 ? -
94 2022-03-08 00:50 26 *******
95 2022-03-08 00:51 ? -
96 2022-03-08 00:52 29 **********
97 2022-03-08 00:53 28 *********
98 2022-03-08 00:54 27 ********
99 2022-03-08 00:55 29 **********
100 2022-03-08 00:56 30 ***********
101 2022-03-08 00:57 27 ********
SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 15 --- Lifetime Power-On Resets
0x01 0x010 4 2 --- Power-on Hours
0x01 0x018 6 979763522 --- Logical Sectors Written
0x01 0x020 6 924184 --- Number of Write Commands
0x01 0x028 6 280899759 --- Logical Sectors Read
0x01 0x030 6 1360962 --- Number of Read Commands
0x01 0x038 6 7564300 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
More information about the Smartmontools-database
mailing list